Do you guys have room for some Americans over there? I could use a change of scenery.My Grandpa would be spinning in his grave if he knew I swore allegiance to the queen when I became a citizen here in good ol NZ. Well it was a king when he fought the English....but you know what I mean.
Me, I love this country...I'll die for it
I’m sure Himself and the dog would love it, but I prefer to be the only fog machine in the houseParty pooper
Cthulhu Hastur 88W Mod
I like it. Looks really well made.I received my Cthulhu Hastur 88w mod early this week.
The battery tube, buttons and screws are 304 SS. The section where the board is located is aviation aluminum. It's CNC machined. Very solidly built and IMO on par with my Squid DB's in that regard. Top notch quality all around.
View attachment 900409
It uses Cthulhu's own Atom chip. The chip does wattage, TC (SS, TI, NI, TCR) and bypass. The UI is super easy to navigate. The color display is bright and easy to read outdoors in direct sunlight.
Here is mine with the Pocket v2 RTA (22mm). The Project X (22.5mm) fits nicely. A 24mm atty would overhang slightly.
View attachment 900407
Size wise it's 3mm shorter than a JAC DNA75 and 5mm taller than a Colossal. About the same width as a JAC. It is very comfy in-hand.
I've put it through its paces in all modes. Not much to say about wattage or bypass other than they just work. Cthulhu did a fine job with TC. Their TC is very much on par with an Asmodus Colossal or the Geek Vape Aegis Solo. I ran several tanks completely empty with no dry hits or wick burn.
Would I recommend it? Yes. Would I buy another? Yes. IMO Cthulhu did an excellent job with the Hastur 88w mod.
I bought mine from Vapelink (UK). Shipping was fairly quick at 8 days.
You and Kat crack me up!!!Unless SMT bought every tuxedo in Europe
I only snagged two tuxedos. 
Had my eye on this mod. Nice review.I received my Cthulhu Hastur 88w mod early this week.
The battery tube, buttons and screws are 304 SS. The section where the board is located is aviation aluminum. It's CNC machined. Very solidly built and IMO on par with my Squid DB's in that regard. Top notch quality all around.
View attachment 900409
It uses Cthulhu's own Atom chip. The chip does wattage, TC (SS, TI, NI, TCR) and bypass. The UI is super easy to navigate. The color display is bright and easy to read outdoors in direct sunlight.
Here is mine with the Pocket v2 RTA (22mm). The Project X (22.5mm) fits nicely. A 24mm atty would overhang slightly.
View attachment 900407
Size wise it's 3mm shorter than a JAC DNA75 and 5mm taller than a Colossal. About the same width as a JAC. It is very comfy in-hand.
I've put it through its paces in all modes. Not much to say about wattage or bypass other than they just work. Cthulhu did a fine job with TC. Their TC is very much on par with an Asmodus Colossal or the Geek Vape Aegis Solo. I ran several tanks completely empty with no dry hits or wick burn.
Would I recommend it? Yes. Would I buy another? Yes. IMO Cthulhu did an excellent job with the Hastur 88w mod.
I bought mine from Vapelink (UK). Shipping was fairly quick at 8 days.
Aw come on, it ain't bad.Why oh why is our country so backwards?
I just feel like I want to cry sometimes. What happened to us? We used to be a shiny city on the hill and we're turning into a rotting smelly backwater. On so many fronts.
So there are a few funky twists and turns in the road. You know better than most every country has those. Poland??? So yeah, we deal with them one way or another. Right??? Right!
Thanks. I took a photo with the 24mm Unicorn RDA on it. As I run my fingers over where they connect it is flush. So I must take back what I said earlier. The only thing I would note is that the top of the mod has a rolled edge (see pic). If that doesn't bother you I would say you're good to go brother!
Yours too!!!May your Thursday be shiny and bright!
It's probably going to go to his head. He better not get too cocky.Bludger will be happy, he can flash his girlfriends again
Rob Fisher's video makes me want to set up a Dvarw.I get Kayfun like flavor from them. Nailz, you probably already tried... but playing with the height of your coil can make a difference. I set my coil ~1.5mm above the AF (sometimes a little higher). Also too much wick inside the chamber can affect flavor. Rob Fisher has an excellent video for his Exocet wicking method. It works well. Vapdivrr's way works really well too. Hope that helps.
ETA: Vapdivrr's link would help. Dvarw MTL RTA by Coppervape (clone)
Maybe you could get a dragon suit.I’m sure Himself and the dog would love it, but I prefer to be the only fog machine in the house
Just waiting for the Mixx to drop in the US. If I can’t snag one here, I’ll order from the EU. Unless SMT bought every tuxedo in Europe
I'm ocd about airhole positions too. But there's ways around it if they aren't lining up right on your mod - beauty rings for RDAs or mod protectors like these:
Ofcourse...the more the merrier. We even have a vaping law for ya. You won't be able to get flavors at the filling stations
That's ok. I generally try not to buy my gasoline and eliquid at the same location.Ofcourse...the more the merrier. We even have a vaping law for ya. You won't be able to get flavors at the filling stations
I see what you mean about the rolled edge. Looks ok to me so it's still top of my list. Thanks mate.Thanks. I took a photo with the 24mm Unicorn RDA on it. As I run my fingers over where they connect it is flush. So I must take back what I said earlier. The only thing I would note is that the top of the mod has a rolled edge (see pic). If that doesn't bother you I would say you're good to go brother!
View attachment 900419
I noticed afterwards I didn't have the Unicorn cap sitting flush. Sorry.
