Shinyitis Support Group

[Pigs]

Mr @Pigs

View attachment 916659
here's a Dvarw DL with a 25mm * 20mm glass tank.

When I was sticking it on, I noticed that the DL has a groove for the tank to sit in. Because it's designed for thin PC/PEI tubes, it's not going to fit a 24mm glass tank - like you discovered with using the DL FL glass seals.

From what I understand, glass has a thickness of 3mm. So our 25mm with its internal id of 22mm fits, but 24mm with an internal id of 21mm won't.

I've got an Eleaf Ello tank floating around somewhere which uses a 24.5mm * 20mm glass. That's my next glass to try.

There's tons of tanks that use 25mm * 20mm glass, and a few that use 24.5mm * 20mm. If you want to see if you have any of them, try this search:
https://www.fasttech.com/category/3051/replacement-tanks#!/2=24_25|1=19_20|177=Replacement Tanks|p=1|s=r|ps=30|k=
On the left is the width and height values. I had to use 19-20mm to get it to search, so make sure your resulting tank's glass has a height of 20mm

Thanks Ange!

 

[Pigs]

Apologies, I should've explained better. I grew up in South Africa. We called the corner store Cafe (we pronounced it Cafy...Cafie).
Over here in NZ a Cafe is more of a restaurant.
It's the in thing here. They are everywhere, and the one is flashier than the next. I once heard Wellington (my home town) has (per capita) the most Cafes in the world...

Main diff between a cafe (café French word for coffee of course) and a restaurant here is that a cafe is more focused on coffee and pastries/light meals and a restaurant is more a serious eatery.
Probably same in NZ?

 

[Fredman1]

Main diff between a cafe (café French word for coffee of course) and a restaurant here is that a cafe is more focused on coffee and pastries/light meals and a restaurant is more a serious eatery.
Probably same in NZ?

LOL something along those lines is actually what I was trying to say....I mean meant....but i'm linguistically challenged

 

[bask]

@bask found him
Who Adds Milk to Tea and Why

ngl, that was really good. Almost got me at the Dutch person, I was like “Oh noes, one of my ...... ancestors brought it to Europe” and then a sigh of relief that it was a French person, until I remembered I have French blood…

I forgot about chi though. Chi is so comforting and warming and everything that is right with the world.

^^^^^^^^^^^^^^See?!
Must be that dang French blood.

 

[Pigs]

LOL something along those lines is actually what I was trying to say....I mean meant....but i'm linguistically challenged

No way. Red X earned. You say what you mean and we all understand

 

[Pigs]

Broke out the Haku Xeta clone tonight. Positive clamp nearly busted but holding on for now and connection is good.

And wicked

Clone in clone

 

[Letitia]

Good morning Shiny's

 

[the wind]

 

[borno]

I love the smell of a dancin' banana in the morning

 

[Tralfaz]

Happy Friday the 13th, shinies <3

I picked up a few new (to me) flavors on my last juice haul. This one is pretty dang good. I cracked this bottle on Wednesday and it's already half gone It hits all the right notes for me. It's sweet but not a coil killer, has a super rich vanilla note similar to french vanilla ice cream and it's not too eggy for a custard if that makes any sense. I'm almost getting a faint touch of vanilla wafer on the finish, too. I don't expect it to last the weekend.

Obligatory morning banana (hehe) -

 

[charlie1465]

Good evening shinies

Bit late today....been at hospital having my Rituximab which helps prevent a relapse with my lymphoma.

Happy birthday @Opinionated
Hope you're doing something special with all your family......hugs and another two

 

[AngeNZ]

Morning shinies

Another Dvarw got claptonised this morning:

2.5mm id, 316L 2*32/38 springy coil, in a Dvarw DL

 

[Superuser187]

Morning shinies

Another Dvarw got claptonised this morning:
View attachment 916785
2.5mm id, 316L 2*32/38 springy coil, in a Dvarw DL

Seksi

 

[Resistance]

Greetings Shiny Folk!!!

 

[ShowMeTwice]

Main diff between a cafe (café French word for coffee of course) and a restaurant here is that a cafe is more focused on coffee and pastries/light meals and a restaurant is more a serious eatery.
Probably same in NZ?

Same here too.

 

[ShowMeTwice]

Good afternoon Everyone !!!

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Aliraonz]

Good morning shiny ones

I got it here:
Efest Elite LUC V4 HD LCD Charger - The Vape Shed

I go for mains powered, which your two are. It just comes down to how fast you want to charge your batteries.

0.5a is the best for battery longevity, but a 3000mah will take up to 6 hours. 2a means your battery won't last as long in terms of cycles but a 3000mah will charge in 90minutes. And 1a is in between those two.

Xtar MC6C:
Max speed: 1a x 3 or 0.5a x 6

Nitecore new i4:
Max speed: 1.5A x 1 / 0.75A x 2 / 0.5A x 2 / 0.375A x 4

Efest elite luc v4 hd:
Max speed: 2A x 2, 1A x 4, 0.5A x 4

And also check that they can handle 21700 batteries. The nitecore new i4 does, efest elite luc v4 HD does and I think the Xtar mc6c does too.

Thanks Ange you rock, the explanation made a lot of sense.

If anyone's after more Asmodus/Ultroner on clearance, Everzon has a flash sale going on. They have EOS v2 stab wood mods, along with some stab wood Lunas:
Search results for: 'asmodus'
@Resistance your stab wood Luna awaits!

I was going to mention this sale to you Ange since you are fan but I think now you like the pumper better

 

[Daniel Forsyth]

I was going to mention this sale to you Ange

Why where you going to mention it to Ange?
I know of someone else who likes his Asmodus mods much more

 

[AngeNZ]

Seksi

I wasn't calling it that when I installed the lil pecker

$3.39 Authentic Superfine 316L Stainless Steel Wire - 32*2/38 AWG / 0.2mm*2/0.1mm dia. / 10pcs/pack at FastTech - Free Shipping

@Redbird11 These are anti-clockwise coils (I think) - so when you install them instead of taking the slack out of your coil legs when you tighten the screw, they stay the same.

Someone else should have a better method (I hope). My way is to wrap the leg around the screw completely and hold it against the coil rod while tightening down the screw. That way it can't move and loosen. It was easier on the FL deck, but doable on the older Dvarw deck too.

You can always flip them upside down so they are coil down/legs up, and install them that way too