DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,610
63,106
toledo ohio
Happy Saturday, shinies <3 Got some vape mail today.

plLyl6H.jpg


The Unicorn Vapes MDX V2.0. This thing is very well built and you can tell from the weight of it. It has basically the same switch as the Vert which is great and the engravings and finish are both very well done. I'll have to do a series build this week and test it out in stacked mode too. Pretty sweet setup for 55 bucks :D

Very nice, and great price! I have a couple stacks, I’ve never used them. So heavy lol.
 

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,610
63,106
toledo ohio
Dang and I want the orange one with the tank :lol:

Also, @Wayneo,

you know you can just wait for the car next to you to pull off right? If that doesn’t work just listen for the beep. Remember, like George Carlin [RIP] always said, pretty much everyone in all those other cars are :censored:holes. Except us, we know we’re not.


For background, I was born in New Jersey, but moved to Ohio as a kid.

Nobody here uses their horn, except to say hello. I still have trouble with that. Someone I know will pass me and beep beep and I give them the wassamatta with you hands.
 
  • Winner
Reactions: Resistance

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
No worries buddy,whatever i can do to help.
Basically use 2 sites:

VAPEOTOTAL 【Tienda de Vapeo Online】 Líder en España - Vapeototal

Tienda de Vapeo Online | SinHumo Sevilla

Ordered from them all the time (mostly base and aromas) and no problems,swift delivery and zero mistakes on their part.

Don't think they have language selection so in the menus just look for the word ''ALQUIMIA'' after that you should see a list with base,nic,etc and ''AROMA'' should be there.

Just pm if you looking for something specific,i try to find it for you.

cheers
That's really kind of you....I might have a look. It's nice to get an ok from someone that's already used them.

Thanks a lot :)
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
For background, I was born in New Jersey, but moved to Ohio as a kid.

Nobody here uses their horn, except to say hello. I still have trouble with that. Someone I know will pass me and beep beep and I give them the wassamatta with you hands.
Delores....I'm shocked....and letting go of the steering wheel. One hand is usually sufficient for the reversed victory fingers :lol::lol::lol::shock:
 

Javichu

Account closed on request
ECF Veteran
Mar 8, 2020
3,084
17,829
50
Spain
Delores....I'm shocked....and letting go of the steering wheel. One hand is usually sufficient for the reversed victory fingers :lol::lol::lol::shock:

@DeloresRose when you drive you just gotta be as cool as the guy in the ''bumblebee'' Camaro:

 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,906
1
125,627
the Universe • ∞
Also have not bought premade since 2012. Premade for me was ALL gross.

My DIY juice bar, all fully steeped and ready to vape...
6-DD2547-B-956-D-48-A5-B3-DD-10-ECDADB9570.jpg

... ~600 ml's of different juices. There are several more, in the steep.


I only know of one "other" type of Proper Juice Bar, and it's zero alcohol...
rs=w-768,m.jpg

...alcohol =/= juice.

;) :D
 

Javichu

Account closed on request
ECF Veteran
Mar 8, 2020
3,084
17,829
50
Spain
have not brought premade since 2012 so yuck :pA+on the display.

Hey the bottle on the left i got for free,never say no to free e-liquid :)
Clear bottle on the right is my minty fresh DIY.

Also have not bought premade since 2012. Premade for me was ALL gross.

My DIY juice bar, all fully steeped and ready to vape...View attachment 926425
... ~600 ml's of different juices. There are several more, in the steep.


I only know of one "other" type of Proper Juice Bar, and it's zero alcohol...
View attachment 926429
...alcohol =/= juice.

;) :D

Well i mean there is pineapple juice in a piña colada :D:D
 

Zazie

ECF Guru? No!
Supporting Member
ECF Veteran
Nov 2, 2018
10,702
71,880
Maine, USA
Once upon a time (i.e., two days ago), I went for a puff on a KFL19 atop an Aegis Solo and nothing happened. Tried again, and got an "atomizer short" message. From this, I cannily concluded that it was time to recoil, which I finally got around to today. Wrapped and installed the coil, which read 1.14 on the ohm meter. Filled and screwed the atty on the mod, which informed me that the coil was 0.16. Huh, thought I and proceeded to try another atty on the Aegis to see if its coil read correctly, which it did. Huh, thought I again and stuck the KFL19 back on the ohm meter to see what it had to say about all this. "1.14!" it cried. Hmm, I pondered and screwed the KFL19 back on the Aegis, which blandly informed me the coil was 1.14 ohms and it didn't know what I was talking about when I pointed out that it had said something quite different just a few moments before. I mean, butter wouldn't melt in that thing's mouth. Talk about gaslighting.

Any thoughts?
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Once upon a time (i.e., two days ago), I went for a puff on a KFL19 atop an Aegis Solo and nothing happened. Tried again, and got an "atomizer short" message. From this, I cannily concluded that it was time to recoil, which I finally got around to today. Wrapped and installed the coil, which read 1.14 on the ohm meter. Filled and screwed the atty on the mod, which informed me that the coil was 0.16. Huh, thought I and proceeded to try another atty on the Aegis to see if its coil read correctly, which it did. Huh, thought I again and stuck the KFL19 back on the ohm meter to see what it had to say about all this. "1.14!" it cried. Hmm, I pondered and screwed the KFL19 back on the Aegis, which blandly informed me the coil was 1.14 ohms and it didn't know what I was talking about when I pointed out that it had said something quite different just a few moments before. I mean, butter wouldn't melt in that thing's mouth. Talk about gaslighting.

Any thoughts?
Faulty ohm reader in chip.
Aegis is on way out.
Coil leg not screwed down properly or loose post.
Positive pin on atty come loose and needs screwing in again.
Faulty wire if it's a Clapton.

That's all I can think of. May be a good idea to dismantle the atty if other ones work fine on the mod.

Hope that helps :shock:
 

Bigbob2322

Vaping Master
ECF Veteran
Verified Member
  • Jul 27, 2014
    8,478
    23,452
    Schiller PK IL USA
    Good afternoon shiners, miss a day or 2 on this thread you need a speed reading class, hope I didn't miss anything. A very elegant little device graced my hands, I thought some might be interested.

    VAPORESSO SWAG PX 80 KIT REVIEWED BY BIGBOB2322

    20210113_142820.jpg
     

    Users who are viewing this thread