It really does just depend especially with atties...the only way is to go for both and see or wait to hear what other people say re the two atties.
Ok i wasnt satisfied with the response from element.
So i reached out to Suicide mods on fb.
Received an immediate response.
It is a known issue and dovpo are working on a fix. They are waiting until they have a solution to announce the problem. Told me retailers can do nothing and it will be handled direct.
Hope they tell the retailers soon as i see this blowing up and giving the product a bad image if it takes very long.
Id be upset if i didnt have the abyss tip.
So i reached out to Suicide mods on fb.
Received an immediate response.
It is a known issue and dovpo are working on a fix. They are waiting until they have a solution to announce the problem. Told me retailers can do nothing and it will be handled direct.
Hope they tell the retailers soon as i see this blowing up and giving the product a bad image if it takes very long.
Id be upset if i didnt have the abyss tip.
Basically lol.
Suicide rep asked me to be patient and they will post it on their fb page once a solution is figured out.
They may have just found out themselves, so ill give them a bit to figure it out.
Maybe i can get a sbs kit for the trouble
Last edited:
What the 
is this monstrosity? It looks like a Brunhilde lost it's V card to a Profile and a Kayfun in the back of someone's car.
is this monstrosity? It looks like a Brunhilde lost it's V card to a Profile and a Kayfun in the back of someone's car.
Yeah, it really does just depend on how well they implemented their cloning architecture. While one might have better machining capabilities or QC procedures, if either is off by 1/100th of a mm on their measurements, that clone or batch is trash.
What the
View attachment 943395
Hope you're German (Austro-Bavarian) is up to scratch
Hiya fellow vaperinos
Still waiting for my package to arrive,this company Correos Express is really bad.
They said 11:15 to 13:15,it's 3 pm and still nada...can't wait to get my hands on my new Kylin Mini V2 RTA.
Got my fasttech cart all ready to go and just waiting for that juicy 15% off they have on the 2nd of June.
Apart from that nothing new,just watched a couple of videos of the new Arbiter Solo,seems like a good atty.
Think the launch got delayed thou (June 10th),there was a problem with the drip tip,it was a bit wobbly.
It has a feature in the cap that you can twist it to switch between MTL and RTL mode,think that had something to do with the wobbly tip.
Still waiting for my package to arrive,this company Correos Express is really bad.
They said 11:15 to 13:15,it's 3 pm and still nada...can't wait to get my hands on my new Kylin Mini V2 RTA.
Got my fasttech cart all ready to go and just waiting for that juicy 15% off they have on the 2nd of June.
Apart from that nothing new,just watched a couple of videos of the new Arbiter Solo,seems like a good atty.
Think the launch got delayed thou (June 10th),there was a problem with the drip tip,it was a bit wobbly.
It has a feature in the cap that you can twist it to switch between MTL and RTL mode,think that had something to do with the wobbly tip.
Maybe it's the god of internet shopping trying to tell you to slow down. Your shopping reminds me of how I was a year or two ago trying to stock up.
I sure hope mine from sourcemore isn't like that. So if it is then you can't use the ether?
I use various different batteries but the Molicels are excellent. Maybe you've got a dud as you say.
I use mine until my charger tells me that the battery is dropping to 2.0 amps each charge and definitely in the recycling bin when they won't charge fully.
@DeloresRose if you're using an old battery in the Abyss that may be your problem...my older batteries always drain way to fast and it's time for the bin
Could be, because as I said some of mine are older. I think I would’ve noticed that one starting to fade as I used it in other mods. But I put an X on it, I’ll run it through some other mods, and try a newer battery in the Abyss.
And it’s not like I hate the Abyss, don’t get me wrong. It’s beautiful, the finish is fabulous and the flavor is great.
No you can use the ether with the tip that comes with the abyss.
Vape mail time 
Since i don't order that much vaping stuff the few times i do i have to make a special occasion out of it.
You know i will light up some candles,put on a suit and listen to some Michael Bolton or Lionel Richie
This Spanish vape store i use they always send me a 10ml bottle of something when i order,small things like that always nice isn't it?
Ok will post a pic later once i get the atty clean,coiled and whicked
Since i don't order that much vaping stuff the few times i do i have to make a special occasion out of it.
You know i will light up some candles,put on a suit and listen to some Michael Bolton or Lionel Richie
This Spanish vape store i use they always send me a 10ml bottle of something when i order,small things like that always nice isn't it?
Ok will post a pic later once i get the atty clean,coiled and whicked
Thanks! I did watch a video on it but won't have a good feel for how it works until I get my hands on it.
I knoooooooooooow... I only have a few more things I wanna try out before I figure out what I want multiples of. All of it has to get here first though... Help me hittman, help me...
My experience with ulton clones has been superb. Always a 1:1 to the authentic. I will always choose ulton first. SXK is great as well but not always 1:1.
I was thinking about marking my batt's the other day as well. I got a whole boat load of Molicel P28A's not long ago and now I have a boat load of P26A's coming as well. Don't want to be getting those 2 intermingled.
It's really hard to recommend stuff to others since everyone's preferences are different. My favorite rta is the original Geekvape Zeus RTA single coil for RDL. I run .25 ss316 flat braided coils anywhere from 22-27 watts. They are easy to build and I think have pretty good flavor. I always have 3-4 in current rotation and have a total of about 15 stocked up. I have tons and tons of tanks I've tried over the years in storage. I also like the augvape intake and wotofo serpent elevate tanks but don't run them as often. This past year I started running about as many drop in coils as I have rtas so with an average of around 14 set ups in current use they are about half and half. I have four of the Jac dna75's, a Lost Vape Thelema dna250c, a dovpo riva dna250c, and two dovpo odin mini dna75c mods that I simply love. To me it's hard to go wrong with a dna mod. I got to beta test the new 100c board and really liked it. I'm not sure if there are many mods if any out with it yet. One mod kit that I reviewed and really liked a lot is the Lost Vape Ursa Quest. I ended up buying two more for back ups and bought coils and rba's for them. One that comes to mind that I really liked that I reviewed was the Cold Steel AIO. It's a pod mod that comes with a nice rba and a 510 adapter for the rba so you can test fire your coil. It also came with a 510 adapter so you could run regular tanks. I don't think it was a popular one but I really liked it.
Weird thing guys and gals.
Cleaned the atty,put the coil and wicked it,put it all together and then it came time to fill the tank up i see this:
Like a plastic covering EVERYTHING...no kidney hole to fill her up just a slight gap where it takes ages to fill the tank,it actually is supposed to look like this:
Odd...watched like 3 reviews and looked up a ton of pics and in none of them the atty looked like mine.
I have no holes to put the juice in...am i supposed to take that plastic thingy off?
Cleaned the atty,put the coil and wicked it,put it all together and then it came time to fill the tank up i see this:
Like a plastic covering EVERYTHING...no kidney hole to fill her up just a slight gap where it takes ages to fill the tank,it actually is supposed to look like this:
Odd...watched like 3 reviews and looked up a ton of pics and in none of them the atty looked like mine.
I have no holes to put the juice in...am i supposed to take that plastic thingy off?
Are you sure you don't have to unscrew or pop off something metal on the top of the tank. Just looking straight down in your photos, it looks like you took off the drip tip, but the actual cap section is still on the tank.
Similar threads
- Locked
