Good Morning Shiny People
Not sure but think he got the fatal 3rd strike from yt.I see on Facebook that Mike Vapes channel has been shut down...
Anybody knows more about that?
I've just received an SMS from Aus. Post and my Kool Kumo is on the delivery van and it's Komin' today
Now my Brunhilde's can see what all the fuss is about
Mate, I'd wear a helmet.
Just in case they get stroppy.
Heard anything about the original of this one @Pigs?
$27.90 SXK PROtocol Atom Styled Bridge RBA for Boro Devices / Billet / BB Mod Kit - 3.5mm + 4.0mm air pin at FastTech - Free Shipping
You can get tank sections etc too
$27.90 SXK PROtocol Atom Styled Bridge RBA for Boro Devices / Billet / BB Mod Kit - 3.5mm + 4.0mm air pin at FastTech - Free Shipping
You can get tank sections etc too
@charlie1465 This is how I judge the coil height on the Kumo. I take the cap off and place in on the rim where it usually lies(when closed). I then eye the air inlets to the bottom of the coil.
See how the cotton forms a arch...so the side air can flow unobstructed to the coil?
LOL...when I wrote it I wondered what comments i'll be getting...and from whom
See how the cotton forms a arch...so the side air can flow unobstructed to the coil?
Uh
Well
Um
Guess i cant disagree....
LOL...when I wrote it I wondered what comments i'll be getting...and from whom
I've spent the past few days focusing purely on flavour.
Since I have the same boysenberry juice in the Lethal rta and a Dvarw Dl RTA, I gave them a showdown!
The results surprise me, but I can now state: that the Lethal RTA has flavour as good as the Dvarw DL.
My next step is to try a 3mm id coil, and to try both the honeycomb insert and no insert. Once that's all done, I think I'll write it up as a semi-review - since there's so little info out there.
Since I have the same boysenberry juice in the Lethal rta and a Dvarw Dl RTA, I gave them a showdown!
The results surprise me, but I can now state: that the Lethal RTA has flavour as good as the Dvarw DL.
My next step is to try a 3mm id coil, and to try both the honeycomb insert and no insert. Once that's all done, I think I'll write it up as a semi-review - since there's so little info out there.
Morning shinies
That is so stunningI can't wait to see your thoughts and review on the BF
I was surprised how nice it was when I opened it. I need to get it set up and tested but I’m wore out most weeknights by the time I get home from work and take the dog for her walk. I’ll see how I feel later. I think this is the first time Lost Vape has come out with an rda.
I see on Facebook that Mike Vapes channel has been shut down...
Anybody knows more about that?
Just on FB or on YouTube?
Only on utube. He has a new channel now...chilling with mike.
Letitia posted the link above.
Last edited:
You just arose my attention ....and activated my temptation dear Angela.
Thank you Fred. I think that my coil is a tad lower. I'll try raising it a bit. As far as dry hits go I'm definitely doing something wrong in the wicking département with both the Kumo and the Brunhilde. My cotton is Mavaton X so tends to produce very dense and fluffy legs (don't say a word @Hightech Redneck)@charlie1465 This is how I judge the coil height on the Kumo. I take the cap off and place in on the rim where it usually lies(when closed). I then eye the air inlets to the bottom of the coil.
See how the cotton forms a arch...so the side air can flow unobstructed to the coil?
View attachment 963997
LOL...when I wrote it I wondered what comments i'll be getting...and from whom
I'll definitely spread the legs a bit further apart but looks like you've got far thinner tails than I end up with in both RTA's. I'll rewick and tease out the cotton a bit ......again!!
Good morning shinies
Not much too report here. My two new Minikin's are awaiting unrapping (don't ask me why I bought them)....stash stuff.
@AngeNZ here's the FB group which will tell you more about the protocol bridge. The 3.5/4mm inserts are interesting to me but you will still need to make sure that your Boro device provides enough air....that's why all my BB doors have extra airflow holes drilled out....worth getting one maybe....
Protocol V Tech
Rewicking my Brunhilde and Kumo today as I need to tweak my setup's. My problem may just be that my vaping style won't keep up with the wicking. I tend to vape in bouts of seceral chainvapes then rest for a while. I like my NIC hits
Have a really good day all
Not much too report here. My two new Minikin's are awaiting unrapping (don't ask me why I bought them)....stash stuff.
@AngeNZ here's the FB group which will tell you more about the protocol bridge. The 3.5/4mm inserts are interesting to me but you will still need to make sure that your Boro device provides enough air....that's why all my BB doors have extra airflow holes drilled out....worth getting one maybe....
Protocol V Tech
Rewicking my Brunhilde and Kumo today as I need to tweak my setup's. My problem may just be that my vaping style won't keep up with the wicking. I tend to vape in bouts of seceral chainvapes then rest for a while. I like my NIC hits
Have a really good day all
I don't thin at all mate. I use CelloCotton Rayon only. In other RTAs I sometimes thin, but not on the Kumo or the Brunhilde. The cotton must make good contact with the deck...so the juice can be soaked up.
This is how long I cut on the Kumo. It's actually a bit long...but it's wicking well.
Here's the height of my 2.5mm coil
Top view after juicing her up
Not yet Ange but I want them allHeard anything about the original of this one @Pigs?
$27.90 SXK PROtocol Atom Styled Bridge RBA for Boro Devices / Billet / BB Mod Kit - 3.5mm + 4.0mm air pin at FastTech - Free Shipping
You can get tank sections etc too
! Good times for boro rbas right now. Prices are getting more reasonable and options galore. Thanks for sharing that.
When are you going to jump down this rabbit hole?
Here's something that you BB users might find interesting. Clever.
Buy YFTK Replacement Negative Contact for SXK BB 60W / 70W / Billet Box
Buy YFTK Replacement Negative Contact for SXK BB 60W / 70W / Billet Box
Similar threads
- Locked
