This shipping delays is the worst i've experienced since I started ordering vape stuff. The waiting time in general was 10days...minimum shipping fees to.
Nowadays its a month...with way higher fees.
There's different reasons for it, but they all has to do with Covid. Now with this new Omicron spreading as fast as it does, the shipping fiasco will be more of the same....if not a bit worse. I feel i'm damned if I order...and damned if I don't...especially this time of year.
Best thing I think is to just go ahead, order and kinda forget about it...i'm good with that actually
Nowadays its a month...with way higher fees.
There's different reasons for it, but they all has to do with Covid. Now with this new Omicron spreading as fast as it does, the shipping fiasco will be more of the same....if not a bit worse. I feel i'm damned if I order...and damned if I don't...especially this time of year.
Best thing I think is to just go ahead, order and kinda forget about it...i'm good with that actually
I’ve never had a review sample taken this long from sourcemore. It was shipped end of October. You’re right though about shipments taking longer and shipping costs being higher. I don’t order as much as I used to with shipping being so high.
I did exactly the same....the Kumo plus Brunhilde....one in stock the other pre-order. The Kumo has been in stock for at least a week now and my order is showing no sign of being shipped.
As far as the Cabeo goes I ordered mine from 3fvape and it arrived in 8 days.
Morning Shinies 
Wishing you all a happy Christmas. Warm one if you're in the southern hemisphere and snowy if you're not
SM are getting the thumbs down if they keep this shipping debacle up
Have a good day/evening.
Wishing you all a happy Christmas. Warm one if you're in the southern hemisphere and snowy if you're not
SM are getting the thumbs down if they keep this shipping debacle up
Have a good day/evening.
Morning shinies
Here's @Letitia's review on the Lethal:
https://www.e-cigarette-forum.com/threads/shinyitis-support-group.841061/page-6372#post-2344083
and mine: Lethal RTA review
With a 3mm id coil, it's an easy build and wick and the flavour is amazing. But it's still a bottom airflow atty - if you prefer top-air, maybe grab a JK MR RTA from a different store. Or for a more robust option, look at the Thunderhead Creations Artemis RDTA
Thanks for the useful links,yep read both reviews and i'm liking it.
About bottom airflow,to be honest i don't not like it,it's just that some RTA's are finicky when wicking like unless you put it perfect it will leak as opposed to others that are really more forgiven when it comes to wicking.
Just curious to know if the Lethal RTA is the finicky type or more like forgiven when it comes to wicking,if it's finicky it will leak on me...i know it since some days my mind ain't in the right place and i will probably do a poor job at wicking.
Weird thing is that i wicked the Fat Rabbit 3 times...that is 3 times i rewicked a dual coil (never used one before) and all 3 times it has come out perfect with no leaking,i want that in the Lethal RTA hehe.
cheers bud
When I preorder from sourcemore and see the item is in stock I contact them and ask when I can expect tracking information. Usually within a couple days I have tracking. You just have to remind them you're watching.
Yes I know a "rocket" works wonders sometimes thanks. I may give it a go but I'm not that concerned really. It's the length of time it takes to get here since they changed there postal service that's more annoying. Every order I've made from SM since has been problematic. 3fvape have made similar changes and it works like a charm.
At the end of the day it'll get shipped at some point. I'm guessing they're working through the preorder list in date order.
Morning shinies
You made my day
For now I'm really just playing, figuring out what I can do and what the camera can do. And mod photography seems to be a great way of seeing things differently.
When I've nailed down the basics, and my ratio of blur to focused switches around - then I'll look into putting my photos out there.
You made my day
For now I'm really just playing, figuring out what I can do and what the camera can do. And mod photography seems to be a great way of seeing things differently.
When I've nailed down the basics, and my ratio of blur to focused switches around - then I'll look into putting my photos out there.
Hi @charlie1465 
Here's a Very, Very, Very, Very, Very, Very interesting read that you might find Very Interesting!!! I definitely did
VAPEFLY BRUNHILDE MTL RTA REVIEWED BY BIGBOB2322
And anyone else it's a really good review on a quality RTA, worth a look!!
Here's a Very, Very, Very, Very, Very, Very interesting read that you might find Very Interesting!!! I definitely didVAPEFLY BRUNHILDE MTL RTA REVIEWED BY BIGBOB2322
And anyone else it's a really good review on a quality RTA, worth a look!!
I've been mainly using the 2 hole insert, which sits a bit higher than the honeycomb one. And I've tried to use a coil that's as wide as the two holes.
With my 3mm id Lethal I stuff the cotton in the coil, cut to the outer o-ring, loosen up the tails and stuff them in the wicking ports. I give it @bigbob2322 beefy shoulders, so that the tails aren't resting on the insert holes.
And I've had no leaking from a 3mm id build. The flavour with a 3mm is amazing, but it is a smidge more restrictive.
With the 2.5mm id, I wick a bit tighter and loosen it up even more. I also cut the tails a smidge longer. The wicking ports are obviously for a 3mm + coil, but it can be done. Again I use big shoulders and make sure the tails are away from the 2 hole insert:
The only seeping I've had from a 2.5mm id build was where a tail nearly comes out of the wicking port. Strangely even with only a teeny tail left halfway in the channel it was still saturated!
I prefer a 2.5mm id coil, I like the extra airflow and lower ramp. But I'm playing around with 3mm id coils to find one that works.
I do get some condensation on the base of the atty.
And if you do there, buy extra bubble tanks. Especially with your track record!!!!!!
Edited to add: Excuse my wonky coils!!!!!
Last edited:
All the talk about the Lethal gave me inspiration to build it finally tonight. I used an alien Clapton .45 ohms 3mm id
got it all setup and ready to go but no. The airflow ring is firmly parked at off. Any attempts at turning it just unscrews the deck from the tank.
Tried to move with an atty tank tool & a rubber grip but it’s not going anywhere. It looks pretty though.
So any suggestions as to being able to rotate the afc ring without removing it from the tank?
I was getting irritated so decided to put it down and ask for help. Hopefully someone has figured this out before.
No idea why two pics are sideways. Maybe my irritability is being tonight so like the Lethal I’ll just let it fo for the moment.
got it all setup and ready to go but no. The airflow ring is firmly parked at off. Any attempts at turning it just unscrews the deck from the tank.
Tried to move with an atty tank tool & a rubber grip but it’s not going anywhere. It looks pretty though.
So any suggestions as to being able to rotate the afc ring without removing it from the tank?
I was getting irritated so decided to put it down and ask for help. Hopefully someone has figured this out before.
No idea why two pics are sideways. Maybe my irritability is being tonight so like the Lethal I’ll just let it fo for the moment.
Good morning DanielHi @charlie1465
VAPEFLY BRUNHILDE MTL RTA REVIEWED BY BIGBOB2322
And anyone else it's a really good review on a quality RTA, worth a look!!
Well..... read and digested. The only thing I can try is making my tails longer and fluffier.....but essentially I've tried that before with worse results.....I'm at a bit of a loss really. Maybe it just my vaping style.
I'm going to take it apart again and make sure that my rods are where I want them. Thanks for your help
Good morning Daniel
Well..... read and digested. The only thing I can try is making my tails longer and fluffier.....but essentially I've tried that before with worse results.....I'm at a bit of a loss really. Maybe it just my vaping style.
I'm going to take it apart again and make sure that my rods are where I want them. Thanks for your help
Good Morning Charlie
It's always my pleasure to help Mate! I really would like you to get the Brunhilde working tip top if possible, especially since you have another one on the way
All RTA's can't be winners for you though so you can only try your best with her
Have a Fantastic day Mate
Thanks Daniel.....we can but try. I love the flavour but I would like to get it right for me. It's not a serious problem really as I have so many tanks in rotation testing new juices so letting it sit isn't a problem.. have a good evening mateGood Morning Charlie
It's always my pleasure to help Mate! I really would like you to get the Brunhilde working tip top if possible, especially since you have another one on the way
All RTA's can't be winners for you though so you can only try your best with her
Have a Fantastic day Mate
Similar threads
- Locked
