charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
@charlie1465 I had a problem with the Brunhilde's wicking in the beginning to. Never had a definite dry hit, but it came close a few times....it kinda hovered on the verge of going dry.
Since then I started stuffing more cotton (I use Rayon), cutting a bit longer and make sure the cotton is laying absolute flat on the cables, I haven't had that again.
That's exactly what I'm getting but then again I stop vaping as soon as it's on the verge!! I've had several tries with more cotton...less cotton....fluffed and teased. Not to mention getting annoyed :D
I'll try more cotton as I've both Bob and now you have suggested it. I'm actually at the point where cables seem to be the likely cause but we'll see :)
 

Fredman1

Vaping Master
ECF Veteran
Mar 27, 2017
4,052
22,790
68
New Zealand
That's exactly what I'm getting but then again I stop vaping as soon as it's on the verge!! I've had several tries with more cotton...less cotton....fluffed and teased. Not to mention getting annoyed :D
I'll try more cotton as I've both Bob and now you have suggested it. I'm actually at the point where cables seem to be the likely cause but we'll see :)
What i've also been concentrating on is to properly soak the newly installed cotton from the top....to make sure there's no dry part where the cotton touches the cable.
I wet the cotton and then stick the bottle tip right to the bottom where the cotton and cable makes contact, and give it a proper squeeze.
Not sure if that's over kill, but I figure it'll help to get the capillary action 'completed'.
 

Pigs

Vaping
ECF Veteran
Jun 7, 2019
7,425
53,314
Sydney Australia
No this is one I didn’t get. I have followed it closely and almost pulled the trigger a couple times. From what I’ve heard great flavor and very smooth airflow. I haven’t seen a lot of them for sale on the bst pages so it must be very good. The only con I’ve seen has been people using it tight Mtl. It floods and gurgles supposedly. Mission did release a Mtl kit for it that blocks off the wick channels and something else with the airflow. If you vape Rdl I’d say go for it
Thanks mate. I'm in the RDL camp so hopefully it works out. If it lives up to the usual high SXK standards it should be pretty decent quality.
 

hittman

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jul 13, 2009
    61,697
    180,299
    Somewhere between here and there
    Good morning. Today is my last day at work before ten days off. I don’t get much vacation time so am looking forward to spending time with the family. I also have five reviews to write but don’t know that I’ll get them all done while I’m off.
     

    Truckin Vaper

    Senior Member
    ECF Veteran
    Jan 14, 2021
    236
    1,656
    8D446312-ED44-49BC-B28C-EEF91DCC7C54.jpeg
    My new boro device BMM Borat 60. Box Mod Mafia makes a excellent mod
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    What i've also been concentrating on is to properly soak the newly installed cotton from the top....to make sure there's no dry part where the cotton touches the cable.
    I wet the cotton and then stick the bottle tip right to the bottom where the cotton and cable makes contact, and give it a proper squeeze.
    Not sure if that's over kill, but I figure it'll help to get the capillary action 'completed'.
    I do exactly the same!!
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,379
    88,493
    New Zealand
    Morning shinies ;)

    Good morning. Today is my last day at work before ten days off. I don’t get much vacation time so am looking forward to spending time with the family. I also have five reviews to write but don’t know that I’ll get them all done while I’m off.

    Quality time trumps reviews :wub:

    I'm in the same boat, and usually work holidays. But my poor deprived nephew is doing my job from today, until 2021 2022

    My only plans are photography and shopping!
     
    Last edited:

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Morning shinies ;)



    Quality time trumps reviews :wub:

    I'm in the same boat, and usually work holidays. But my poor deprived nephew is doing my job from today, until 2021.

    My only plans are photography and shopping!
    Enjoy your break and happy Christmas Ange xx
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,697
    180,299
    Somewhere between here and there
    Morning shinies ;)



    Quality time trumps reviews :wub:

    I'm in the same boat, and usually work holidays. But my poor deprived nephew is doing my job from today, until 2021.

    My only plans are photography and shopping!

    Yes it does. I also plan on getting my booster shot while I'm off. Keeping my fingers crossed that I don't get sick afterwards like I did with the second shot.
     

    Doffy

    Vaping Master
    ECF Veteran
    Verified Member
    Mar 15, 2014
    8,220
    40,975
    Australia
    Yes it does. I also plan on getting my booster shot while I'm off. Keeping my fingers crossed that I don't get sick afterwards like I did with the second shot.
    My Pfizer booster was easiest of 3. Just mild achey muscles and barely noticed
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,697
    180,299
    Somewhere between here and there
    My Pfizer booster was easiest of 3. Just mild achey muscles and barely noticed

    That gives me some hope. I really don't want to get sick on my vacation time.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,379
    88,493
    New Zealand
    20211214-2be5989cd55d48f5a761669128281287.jpg


    The FT coupon code XMAS2021 is already active, and they have VV Pulse AIOs, Delros, BBs and BB Rbas. But I think I'd rather get the Pulse AIO locally, when it gets here next year.

    For now I'm tossing up over a Juggerknot MR RTA from NZ, or a Boxx from the UK. And I'm about to hit up the Oz stores!!!!
     

    Fredman1

    Vaping Master
    ECF Veteran
    Mar 27, 2017
    4,052
    22,790
    68
    New Zealand
    @charlie1465
    I'm curious to know what airflow ring do you use in the Cabeo....given its only wide(ish) open or MTL.
    I've drilled out the MTL to 1.7mm...RDL, but going to get me a 1.8mm drill now as I might need a smidgen more air.
    I've ordered more MTL rings from FT as I don't trust it going forward...bit fragile.
     

    listopencil

    Ultra Member
    ECF Veteran
    Jun 28, 2017
    2,134
    8,332
    In Partibus Infidelium
    Welllllll....I had the original Geekvape Aegis (28650) a long time ago and it was stolen from my car. I was really bitter about it and never bought another one. Recently I grabbed the Legend (2x18650) and it's great. So I upgraded my pocket mod from an old built-in battery OBS Cube to a single 18650 Geekvape Solo. Got it today. Identical color scheme so everything matches. Nice. I had a scare when I got the delivery e-mail notification, ran out to the mailbox, nothing in the box. I thought I had been victimized. But they didn't actually deliver it because California requires in person adult receipt of anything vape related (bleh). So a quick afternoon drive to my local post office and what's mine is mine.
     

    Users who are viewing this thread