What transport it's actually on is a different story
A very colorful transport??? Docking in lovely NZ soon[ishly].
A very colorful transport??? Docking in lovely NZ soon[ishly].
Looks like your internet has improved.View attachment 966463
View attachment 966467
A very colorful transport??? Docking in lovely NZ soon[ishly].
Daughters and I talked their momma into upgrading the speed up here. Now I have to "reserve" a time for using one of the girls laptops. If I would have known she was gonna upgrade the speed I would have brought my laptop up here on my trip home a week ago. They wanted me to be surprised. I was! Posting on my smartphone is a no go. It's too small for anything but quickie internet surfing. And typing on the smartphone, forgetaboutit (PIA).
So got vapemail today:
View attachment 966437
Even thou the arm where i got the 3rd Covid shot is killing me and i feel like have been run over by a Hummer i decided to get the Lethal all setup.
Coils i got are made in Spain,0,13 Ohm (in dual) Full N80 and 2,5mm by Bacterio Coils.
Installation was really easy even for a klutz like me,i went with the honeycomb insert since i like more of a RDL vape.
Wicking was a breeze,fluffed the ends only a bit and before i knew it i was all done,filled the tank and it was time to play around with the wattage to find my sweet spot.
Reading the coil at 0.25 ohms,airflow fully open and running between 33 and 36 watts and dang!! this atty is good.
One tank gone and i was hesitant on the refill since i have read some reviews that say when it's time to refill the leaking starts but nah,no leaking so far.
Only con i can think of is the drip tips,while they do look good and you can go all matchy matchy with the 6 different color choices you have but the drip tip is a bit short for my taste.
I think it has to do with the fill cap,it is totally flat so you can't go all in like i do with my Z Sub-ohm tank from Geekvape which is a bit curved in the top.
That must be the downside of having beautiful,rich,full and juicy lips like mine
Normal sized drip tips just aren't enough for my ''pucker up to vape lip'' stance i use when going to inhale the vapor of the gods.
I forgot you this morning
I'm so glad you like it! I find it hard recommending a higher priced atty like the Lethal RTA to ppl, purely due to the price. I got my first one as a gamble, and I knew after an hour with it - I'd need a second one. I'm sure the airflow is similar to other honeycomb RTAs, but I just love it and find it unique.
When you get round to experimenting - I've pulled a coil out, thrown in another - vaped it for a while, and threw back in the first one. It's the first deck I've been able to do that to, without it killing the legs of my poor puny claptons. And it's the same with the inserts - you can change them with a wicked build.
Since like me, your lethal
with bubble glass - it's the same size as the Oxva Arbiter Solo, both the straight glass and the bubble. I've ordered the same size from FT too, it's this SKU:Bubble
$3.31 Iwodevape Replacement Glass Tank for IJOY Avenger Clearomizer (3-Pack) at FastTech - Free Shipping
Straight:
$2.30 Iwodevape Replacement Glass Tank for IJOY Avenger (3-Pack) 3-pack - 3.2ml at FastTech - Free Shipping
And if you want replacement glass for dead JK Mini:
$2.46 Vapesoon Glass Tank for Augvape Merlin Mini Atomizer (2-Pack) 2-pack - authentic at FastTech - Free Shipping
Wow 
The Boxx itself is just as comfy to hold and use as a Mixx. And it's smaller than I thought it would be. I'm so glad I got this before the chunkier VV AIO.
As for theHaute Qbix rba: I threw in a coil and wick without watching any vids and it's already got fantastic flavour. I used a 2.5mm id 7 wrap ni80 30*2/40 - what id are others using?
The 4mm id airflow is spot on. I'm gonna watch some vids in the morning, and redo it if needed.
But, it's a brilliant combination. And thank you to all of you for raving on about it - I absolutely love it
The Boxx itself is just as comfy to hold and use as a Mixx. And it's smaller than I thought it would be. I'm so glad I got this before the chunkier VV AIO.
As for the
The 4mm id airflow is spot on. I'm gonna watch some vids in the morning, and redo it if needed.
But, it's a brilliant combination. And thank you to all of you for raving on about it - I absolutely love it
Great to hear Ange!Wow
The Boxx itself is just as comfy to hold and use as a Mixx. And it's smaller than I thought it would be. I'm so glad I got this before the chunkier VV AIO.
As for theHauteQbix rba: I threw in a coil and wick without watching any vids and it's already got fantastic flavour. I used a 2.5mm id 7 wrap ni80 30*2/40 - what id are others using?
The 4mm id airflow is spot on. I'm gonna watch some vids in the morning, and redo it if needed.
But, it's a brilliant combination. And thank you to all of you for raving on about it - I absolutely love it
I use my normal 5 wrap 2*28/36 (2.6 Ohms/ft) Ni80 coils. Also finding 2.5mm id is better than 3.
One tip is that the wick tails shouldn't be too wide. I cut mine to almost the shape of the channels. The top down/gravity feed system means it's pretty hard to flood. If the wick tails are too bulky they can get kind of jammed in the chimney edges.
I started with the 4mm af but found the 3.5mm was better suited to how I like it. Up to personal taste of course!
Cthulhu has a new AIO. It will work with any of the 3rd party boro tanks. Also takes custom doors and fire buttons.
CTHULHU AIO -The smallest 18650 boro device – CTHULHU MOD -Innovations for You
The batch 2's resolve the problems folks had with the batch 1's. No more door rattles and Cthulhu got rid of that big honking ugly bold AIO written on the inside. @charlie1465, Alex is already making doors for it.
Nice looking lady and scenery is amazing!!Good afternoon EveryOne!
New shiny, Tek Division Legacy DNA 60 SBS. It's really freakin' nice! Perfect for the SvM Kayfun Prime.
View attachment 966449
In other shiny news, I've been chatting via FB with Adrian Yew, designer and maker of the FLVR v1 and v2 RDA's. He found me a v1 down in Malaysia with some accessories. That should be here in a few days.
My dear lady friend and her horse Lexi from dawn today just before our morning ride.
View attachment 966451
Hope you are all good. Stay safe and be well!
Love the look of the Legacy and good price too....
Hope all is well and that you're enjoying yourself....looks a lovely place to be.
WOW that's one sleek looking bike. E Bikes are booming atm...even Harley Davidson, Ducati and Porche are in on it.@Fredman1, hey Mate! I saw a new ebike advertised on Facebook and immediately thought of you.
https://nplusbikes.com/pages/mercedes-benz-eq-formula-e-team-ebikes
https://www.topspeed.com/lifestyle/...electric-bike-you-can-buy-today-ar193307.html
View attachment 966453
Maybe they'll take yours as a trade-in???
The Mother of them all...and my dream bike is this one...
Superdelite – the endurance athlete | Riese & Müller
Endless options when you order one...twin battery with a hand control gearbox. I'll definitely loose that fugly carrier at the back
Good to hear from you mate. Hope you're having a blast up there in the mountains. I'm thinking of you when I watch the Mountain Men series on TV
I’d recommend the Freemax Marvos T or 60W. The 60w is my favorite of the two. Much nicer hand feel. But the coils are among the best I’ve used. They’re both super easy to use and perform very well.
The 60w was my favorite out of the ones I tried from them. I forgot about it until you mentioned it. Plus the Freemax coils are great flavor producers. Great recommendation.
Morning shinies
Since it's been 2022 over here for 7 hours, 24 minutes:
Since it's been 2022 over here for 7 hours, 24 minutes:
Good Morning Shiny People
are the coils as good as the Freemax Luke coils? When they came out they were the best thing on the market
Good to know about the wicking. Have you had any problems with a coil shorting? I redid mine this morning with a 2.5mm id 30*2/40 8 wrap, and it shorted like it was 1999. It was only when I popped the tank on - so I cut my leads shorter, still shorted. Squished the coil down lower - shorted. Raised it higher - shorted. Threw it out the window - shorted!
I looked at the chimney size and saw how small that was, and rewound a 7 wrap with the wraps a smidge off a contact coil. Stuck it in, cut the leads flush, wicked, stuck the tank on, fired - and it didn't short
Yesterday's coil was the same width, and I had no problems with that shorting. But with me, who knows what was causing it to short. The fact that I was building at 3am, with blurry eyes - possibly didn't help
Coil no. 3 has behaved flawlessly today. And I want another Box and Qbix!
Similar threads
- Locked
