listopencil

Ultra Member
ECF Veteran
Jun 28, 2017
2,134
8,332
In Partibus Infidelium
As a matter of fact, someone might ask if you're sure two is enough. Better get four.

Heh, I almost bought two of the original and two of the second edition. I ended up grabbing two of the original and two kayfun Lites (2019) instead. And, c'mon, I gave you guys 8 minutes shortly after the break of dawn to talk me out of it so I gave it a fair chance, right?
 

hittman

ECF Guru
Supporting Member
ECF Veteran
Verified Member
Contest Winner!
  • Jul 13, 2009
    61,556
    179,798
    Somewhere between here and there
    Heh, I almost bought two of the original and two of the second edition. I ended up grabbing two of the original and two kayfun Lites (2019) instead. And, c'mon, I gave you guys 8 minutes shortly after the break of dawn to talk me out of it so I gave it a fair chance, right?

    Yes that's plenty of time. I doubt you'll find anyone here to talk you out of buying something unless it's truly a bad or poorly made product.
     
    Last edited:

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,347
    88,238
    New Zealand
    Morning shinies ;)

    After 35 days....

    Orbit.jpg
     

    Javichu

    Account closed on request
    ECF Veteran
    Mar 8, 2020
    3,084
    17,829
    50
    Spain
    Hey folks :)

    Sorry i haven't posted much here lately,pops had a couple of dizzy spells so we've been busy with tests and all that.
    Seems fine now and they couldn't find anything wrong so they think it's just the heat,gotta keep an eye on him 24/7 thou...got an inflatable bed and put it in the living room (closer to his room so i can hear him),back is killing me after 5 days like that but i gotta be close just in case.

    On the shiny front well my B-Day is in 10 days,well 9 depending on what side of the world you're in so i wanted to treat myself to something shiny.

    Looked around all over Spanish websites for a Juggerknot Mini RTA and it was hard,seemed to lost hope until luck has it there is a shop 20 minutes away from where i live that have one left.

    I did use the clone from fasttech for a long time until it broke (my fault) so i do know it performs pretty good.

    Not sure who it was but someone always posts pics of it,not sure if it @Daniel Forsyth or @AngeNZ ,maybe someone else,to be honest i am running low on batteries from not sleeping that much.

    So anyway,if i got some time tomorrow afternoon i will go and pick up my Juggy Mini,i mean it's not everyday you hit 47 (not tomorrow on the 11th hehe)

    Hope you all doing ok,salutations from Sunny Spain :)
     

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,423
    57,013
    45
    Victoria, Australia
    Hey folks :)

    Sorry i haven't posted much here lately,pops had a couple of dizzy spells so we've been busy with tests and all that.
    Seems fine now and they couldn't find anything wrong so they think it's just the heat,gotta keep an eye on him 24/7 thou...got an inflatable bed and put it in the living room (closer to his room so i can hear him),back is killing me after 5 days like that but i gotta be close just in case.

    On the shiny front well my B-Day is in 10 days,well 9 depending on what side of the world you're in so i wanted to treat myself to something shiny.

    Looked around all over Spanish websites for a Juggerknot Mini RTA and it was hard,seemed to lost hope until luck has it there is a shop 20 minutes away from where i live that have one left.

    I did use the clone from Fasttech for a long time until it broke (my fault) so i do know it performs pretty good.

    Not sure who it was but someone always posts pics of it,not sure if it @Daniel Forsyth or @AngeNZ ,maybe someone else,to be honest i am running low on batteries from not sleeping that much.

    So anyway,if i got some time tomorrow afternoon i will go and pick up my Juggy Mini,i mean it's not everyday you hit 47 (not tomorrow on the 11th hehe)

    Hope you all doing ok,salutations from Sunny Spain :)

    G'day Buddy:thumb:
    It's nice to hear that your pops is going better now:) now you take care of yourself a little more Mate:wub:

    Regarding the Juggy RTA I think the knowledgeable Ange would be the best person to give you some advice!! I can you advice on Brunhilde's and I recommend that you get a new Brunhilde 103 RTA when they're in stock;)

    Take care Buddy:)
     
    • Love
    Reactions: Javichu

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,347
    88,238
    New Zealand
    I’m so aggravated right now. I think I stripped one of the hex screws in my new Tauren Max :mad: ! Devastated now

    any ideas :yawn: ?

    I've done the same plenty of times with hex screws. I usually use a flat head screwdriver that's big enough to get a tight fit lengthwise, and get the screw out with that.

    I bought a geeky 57 in 1 tool set a while ago - same as this one:
    $20.17 Pro'sKit SD-9857M 57-in-1 Multi-bit Screwdriver Repair Tool Set 57-pack - suitable for cell phones & watches & more repairing at FastTech - Free Shipping
    And now whenever I strip a hex screw I just use the correct size hex driver in that to unscrew it. Because it's better quality than my usual vape tools, it gets it out.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,347
    88,238
    New Zealand
    Hey folks :)

    Sorry i haven't posted much here lately,pops had a couple of dizzy spells so we've been busy with tests and all that.
    Seems fine now and they couldn't find anything wrong so they think it's just the heat,gotta keep an eye on him 24/7 thou...got an inflatable bed and put it in the living room (closer to his room so i can hear him),back is killing me after 5 days like that but i gotta be close just in case.

    On the shiny front well my B-Day is in 10 days,well 9 depending on what side of the world you're in so i wanted to treat myself to something shiny.

    Looked around all over Spanish websites for a Juggerknot Mini RTA and it was hard,seemed to lost hope until luck has it there is a shop 20 minutes away from where i live that have one left.

    I did use the clone from Fasttech for a long time until it broke (my fault) so i do know it performs pretty good.

    Not sure who it was but someone always posts pics of it,not sure if it @Daniel Forsyth or @AngeNZ ,maybe someone else,to be honest i am running low on batteries from not sleeping that much.

    So anyway,if i got some time tomorrow afternoon i will go and pick up my Juggy Mini,i mean it's not everyday you hit 47 (not tomorrow on the 11th hehe)

    Hope you all doing ok,salutations from Sunny Spain :)

    I'm the culprit!

    I'm glad you found one. My Juggerknot army is up to 3 members and counting...
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    The roar has left the flame...but its still flickering. As usual I have concerns about the chip quality. You know anything about that?
    I don't know anything about the board in the BXR clone. You're right it's a bit of a concern but the way I look at it is that most of the cheaper boards in Chinese devices are ok these days and for USD$65 it's probably worth a go.
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    I've done the same plenty of times with hex screws. I usually use a flat head screwdriver that's big enough to get a tight fit lengthwise, and get the screw out with that.

    I bought a geeky 57 in 1 tool set a while ago - same as this one:
    $20.17 Pro'sKit SD-9857M 57-in-1 Multi-bit Screwdriver Repair Tool Set 57-pack - suitable for cell phones & watches & more repairing at FastTech - Free Shipping
    And now whenever I strip a hex screw I just use the correct size hex driver in that to unscrew it. Because it's better quality than my usual vape tools, it gets it out.

    thanks. I ended up ordering something like this from Amazon prime so I can get it quickly.

    I also saw several screw “extraction” drivers for stripped screws. Is this the same thing or different?

    of course it has to be the tiniest of hex grub screws I’ve ever seen. I had planned on swapping them out for the flat head grub screws that came in the accessories bag but then this happened.
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,556
    179,798
    Somewhere between here and there
    thanks. I ended up ordering something like this from Amazon prime so I can get it quickly.

    I also saw several screw “extraction” drivers for stripped screws. Is this the same thing or different?

    of course it has to be the tiniest of hex grub screws I’ve ever seen. I had planned on swapping them out for the flat head grub screws that came in the accessories bag but then this happened.

    Sometimes you can get lucky and if it’s a metric hex then see if you have a standard set. Sometimes one or the other is off just enough where it will catch. I have lots of tools so have full sets of both.
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,556
    179,798
    Somewhere between here and there

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,556
    179,798
    Somewhere between here and there
    It's the 5AVape clone of the Hussar BXR. A single 18650 boro compatible mod.

    Search - 3FVape

    It looks nice but the battery cap is kind of odd and looks like it might be hard to turn.
     

    Users who are viewing this thread