Shinyitis Support Group

[FranC]

Morning shinies

View attachment 976209

Love that pic.

 

[Ed Brown]

Someone needs to make a stop motion film about mods marching in formation thru the factory, with the column stopping in turn under a machine that screws on an atomizer in a fraction of a second, and then the mods continue marching to boxes and jump in.

 

[Daniel Forsyth]

Good Morning Shiny People

 

[AngeNZ]

Someone needs to make a stop motion film about mods marching in formation thru the factory, with the column stopping in turn under a machine that screws on an atomizer in a fraction of a second, and then the mods continue marching to boxes and jump in.

Brilliant idea. You could even arm them with light sabers, so those setups had something to do during
Part 2: From The Factory - The Never-ending Journey To Our Doors.

 

[Ed Brown]

Brilliant idea. You could even arm them with light sabers, so those setups had something to do during
Part 2: From The Factory - The Never-ending Journey To Our Doors.

 

[chanelvaps]

Good evening shiny folks.
Any of you that DIY and are in the states care to share where you get your PG and VG from?
Always appreciate any input and thanks

 

[Territoo]

Good evening shiny folks.
Any of you that DIY and are in the states care to share where you get your PG and VG from?
Always appreciate any input and thanks

I've bought PG from a vet supply store that has it for $29, which is the cheapest I've ever seen it. It is the same quality as the PG from the expensive DIY supply stores or Amazon. If you set up for recurring shipping you can get 5% discount, just cancel the the recurring shipping after you order.

UltraCruz® Propylene Glycol for Cattle, Goats, Sheep and Pigs

 

[Fidola13]

Hope everyone had a nice weekend! Over too soon though!

 

[Daniel Forsyth]

I had the urge, the urge to Splurge
I've just placed myself an order at Sourcemore
I bought a new Brunhilde 103 RTA and another Brunhilde 103 RTA and one more Brunhilde but this one's a beautiful MTL RTA(now I'll have a MTL for every day of the week!!) that's three new Brunhilde's just for me and two Brunhilde drip tips because I've lost about six of em' somewhere
My Brunhilde 103 RTA is still on preorder and I usually wouldn't order preorder but my friend Cynthia at Sourcemore sent me an email with an arrival time of only next weekend and SM have always been very close if I've been given an arrival time of a product.
Good enough for me to order my Brunhilde's

 

[440BB]

Good evening shiny folks.
Any of you that DIY and are in the states care to share where you get your PG and VG from?
Always appreciate any input and thanks

Bulk Apothecary has been my source for a number of years and my gallons have been good to the last drop.

 

[Tor R]

Good morning folks,

I had the urge, the urge to Splurge
I've just placed myself an order at Sourcemore
I bought a new Brunhilde 103 RTA and another Brunhilde 103 RTA and one more Brunhilde but this one's a beautiful MTL RTA(now I'll have a MTL for every day of the week!!) that's three new Brunhilde's just for me and two Brunhilde drip tips because I've lost about six of em' somewhere
My Brunhilde 103 RTA is still on preorder and I usually wouldn't order preorder but my friend Cynthia at Sourcemore sent me an email with an arrival time of only next weekend and SM have always been very close if I've been given an arrival time of a product.
Good enough for me to order my Brunhilde's

Most RDTAs are huge, logical, but an RDTA that wicks well, we can not take away the flavor experience.
The Germans can design RDTA.

 

[Javichu]

I've used 4 of my mr 's (at least 2 are always in rotation so used daily) and have zero issues with gaskets. I'm with Ange on this; bad batch that QP should have made right & sent you both a new gasket and top cap.

I was lucky that my usual vaping shop i use for online purchases didn't give me any problems,they took the 1st one back and sent me a new one.
When the second one also came out faulty they took it back and reimbursed me in full,so kudos to them for the good customer service.
QP Designs on the other hand a 0 out of 10,sent like 4 or 5 emails and not even one reply.
Not like my email was asking for free stuff or compensation,just wanted an answer to why this was happening and if it was due to a ''bad batch'' of atomizers.
Their products might be on the ''high end'' side but when it comes to customer service they rate under a taco stand in Tijuana....

I have the same issue with bending fill port gaskets on all 3 True RTA's I own, no spit back though.

View attachment 976182

Must be due to the different design,with the Juggy MR once the bending got to a certain point i was chugging e-liquid by the gallon

Morning shinies



I've been conscious of mine since my first fill, and it's still in perfect shape. That said - I haven't had my MR rta for long.

There are duds in everything. That your two had the problem and were numbered sequentially - would make me blame it on a bad batch.

Yeh that must be it then,bad batch...would have loved to get an definite answer from QP but still no reply from them *shrug*

Vapemail wise i just got my SMOK RPM 5 delivered this morning (giveaway),decided to open up this one and give it a go.
First SMOK device and i read so much stuff about them i was curious,neatly packaged,build quality looks good and it even came fully charged so color me impressed.

Primed the coil and let it sit for a while and hey i gotta say i am enjoying this device,integrated battery thou (would have preferred the RPM 5 PRO) but still 3 tanks in and no leaking or any other problems so i am one happy camper.
Coils are pretty tasty,wasn't expecting them to be that good,pretty flavorful vape.

Maybe this afternoon they will deliver the package from SMOK,think I'm getting a RPM 5 and RPM5 Pro for review purposes.

Since I'm already using the RPM 5 i will keep the one i am getting delivered today in the box and give it to someone that needs it,always feels good to help people get off the cigs.

Talk to you later folks,have a nice day

 

[Letitia]

Good evening shiny folks.
Any of you that DIY and are in the states care to share where you get your PG and VG from?
Always appreciate any input and thanks

Vegetable Glycerin USP Food Grade >99.7% Palm-Derived

I get pg from BCF.

 

[tj99959]

Last time I bought PG/VG it was from "Essential Depot", an it was on sale for $20 for a gallon of each. (half price sale)
So very cheap & very good.

VG - PG: Essential Depot

 

[chanelvaps]

Vegetable Glycerin USP Food Grade >99.7% Palm-Derived

I get pg from BCF.

Hi L and thanks. BCF is Bull City right? your link took me elsewhere

 

[hittman]

Ok Lustro users, someone asked a question on my classified ad and I don't know the answer. Does the Lustro have a 10 second cut off? This person takes long puffs and wants something without a 10 second cut off.

 

[chanelvaps]

Ok Lustro users, someone asked a question on my classified ad and I don't know the answer. Does the Lustro have a 10 second cut off? This person takes long puffs and wants something without a 10 second cut off.

it does not. I have one out in rotation and I just tried it

 

[hittman]

it does not. I have one out in rotation and I just tried it

Thanks. I will let the person know.

 

[Pigs]

Ok Lustro users, someone asked a question on my classified ad and I don't know the answer. Does the Lustro have a 10 second cut off? This person takes long puffs and wants something without a 10 second cut off.

To each his own but I can't imagine needing anywhere near 10 seconds for a puff. That person either has enormous lung capacity or is running their coils very hot.

 

[Doffy]

I used to take 15 second puffs, in the days of 1.8 ohm coils and low watts

It is a big part of what drew me to mechs