AngeNZ

ShutterBug
Supporting Member
ECF Veteran
  • Mar 24, 2018
    11,353
    88,280
    New Zealand
    Someone needs to make a stop motion film about mods marching in formation thru the factory, with the column stopping in turn under a machine that screws on an atomizer in a fraction of a second, and then the mods continue marching to boxes and jump in.

    Brilliant idea. You could even arm them with light sabers, so those setups had something to do during
    Part 2: From The Factory - The Never-ending Journey To Our Doors.
     
    • Like
    Reactions: FranC

    Ed Brown

    Super Member
    ECF Veteran
    Sep 29, 2019
    769
    2,876
    North-Central PA (flyover country)
    Brilliant idea. You could even arm them with light sabers, so those setups had something to do during
    Part 2: From The Factory - The Never-ending Journey To Our Doors.
    depositphotos_235611826-stock-photo-chinese-workers-sort-piles-parcels.jpg
     
    • Winner
    Reactions: AngeNZ

    Territoo

    Diva
    Supporting Member
    ECF Veteran
    Verified Member
  • Jul 17, 2009
    7,701
    37,980
    Texas
    Good evening shiny folks.
    Any of you that DIY and are in the states care to share where you get your PG and VG from?
    Always appreciate any input and thanks

    I've bought PG from a vet supply store that has it for $29, which is the cheapest I've ever seen it. It is the same quality as the PG from the expensive DIY supply stores or Amazon. If you set up for recurring shipping you can get 5% discount, just cancel the the recurring shipping after you order.

    UltraCruz® Propylene Glycol for Cattle, Goats, Sheep and Pigs
     

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,429
    57,061
    45
    Victoria, Australia
    I had the urge, the urge to Splurge:w00t:
    I've just placed myself an order at Sourcemore:)
    I bought a new Brunhilde 103 RTA and another Brunhilde 103 RTA and one more Brunhilde but this one's a beautiful MTL RTA(now I'll have a MTL for every day of the week!!) that's three new Brunhilde's just for me;) and two Brunhilde drip tips because I've lost about six of em' somewhereo_O
    My Brunhilde 103 RTA is still on preorder and I usually wouldn't order preorder but my friend Cynthia at Sourcemore sent me an email with an arrival time of only next weekend and SM have always been very close if I've been given an arrival time of a product.
    Good enough for me to order my Brunhilde's:thumb:
     

    440BB

    Vaping Master
    ECF Veteran
    Verified Member
    Apr 19, 2011
    9,227
    34,009
    The Motor City
    Good evening shiny folks.
    Any of you that DIY and are in the states care to share where you get your PG and VG from?
    Always appreciate any input and thanks
    Bulk Apothecary has been my source for a number of years and my gallons have been good to the last drop.:)
     

    Tor R

    Vaping Master
    Supporting Member
    ECF Veteran
    Apr 4, 2020
    3,253
    26,693
    Mandal, Norway
    www.kinnheia.com
    Good morning folks,

    I had the urge, the urge to Splurge:w00t:
    I've just placed myself an order at Sourcemore:)
    I bought a new Brunhilde 103 RTA and another Brunhilde 103 RTA and one more Brunhilde but this one's a beautiful MTL RTA(now I'll have a MTL for every day of the week!!) that's three new Brunhilde's just for me;) and two Brunhilde drip tips because I've lost about six of em' somewhereo_O
    My Brunhilde 103 RTA is still on preorder and I usually wouldn't order preorder but my friend Cynthia at Sourcemore sent me an email with an arrival time of only next weekend and SM have always been very close if I've been given an arrival time of a product.
    Good enough for me to order my Brunhilde's:thumb:
    Most RDTAs are huge, logical, but an RDTA that wicks well, we can not take away the flavor experience.
    The Germans can design RDTA.
     

    Javichu

    Account closed on request
    ECF Veteran
    Mar 8, 2020
    3,084
    17,829
    50
    Spain
    I've used 4 of my mr 's (at least 2 are always in rotation so used daily) and have zero issues with gaskets. I'm with Ange on this; bad batch that QP should have made right & sent you both a new gasket and top cap.

    I was lucky that my usual vaping shop i use for online purchases didn't give me any problems,they took the 1st one back and sent me a new one.
    When the second one also came out faulty they took it back and reimbursed me in full,so kudos to them for the good customer service.
    QP Designs on the other hand a 0 out of 10,sent like 4 or 5 emails and not even one reply.
    Not like my email was asking for free stuff or compensation,just wanted an answer to why this was happening and if it was due to a ''bad batch'' of atomizers.
    Their products might be on the ''high end'' side but when it comes to customer service they rate under a taco stand in Tijuana....

    I have the same issue with bending fill port gaskets on all 3 True RTA's I own, no spit back though.

    View attachment 976182

    Must be due to the different design,with the Juggy MR once the bending got to a certain point i was chugging e-liquid by the gallon ;)

    Morning shinies ;)



    I've been conscious of mine since my first fill, and it's still in perfect shape. That said - I haven't had my MR rta for long.

    There are duds in everything. That your two had the problem and were numbered sequentially - would make me blame it on a bad batch.

    Yeh that must be it then,bad batch...would have loved to get an definite answer from QP but still no reply from them *shrug*

    Vapemail wise i just got my SMOK RPM 5 delivered this morning (giveaway),decided to open up this one and give it a go.
    First SMOK device and i read so much stuff about them i was curious,neatly packaged,build quality looks good and it even came fully charged so color me impressed.

    Primed the coil and let it sit for a while and hey i gotta say i am enjoying this device,integrated battery thou (would have preferred the RPM 5 PRO) but still 3 tanks in and no leaking or any other problems so i am one happy camper.
    Coils are pretty tasty,wasn't expecting them to be that good,pretty flavorful vape.

    Maybe this afternoon they will deliver the package from SMOK,think I'm getting a RPM 5 and RPM5 Pro for review purposes.

    Since I'm already using the RPM 5 i will keep the one i am getting delivered today in the box and give it to someone that needs it,always feels good to help people get off the cigs.

    Talk to you later folks,have a nice day :)
     

    Letitia

    Citrus Junkie
    Supporting Member
    ECF Veteran
    Apr 2, 2017
    25,849
    136,820
    West Frankfort, IL

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,588
    179,923
    Somewhere between here and there
    Ok Lustro users, someone asked a question on my classified ad and I don't know the answer. Does the Lustro have a 10 second cut off? This person takes long puffs and wants something without a 10 second cut off.
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,028
    85,299
    Burbank CAlifornia
    Ok Lustro users, someone asked a question on my classified ad and I don't know the answer. Does the Lustro have a 10 second cut off? This person takes long puffs and wants something without a 10 second cut off.
    it does not. I have one out in rotation and I just tried it
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Ok Lustro users, someone asked a question on my classified ad and I don't know the answer. Does the Lustro have a 10 second cut off? This person takes long puffs and wants something without a 10 second cut off.
    To each his own but I can't imagine needing anywhere near 10 seconds for a puff. That person either has enormous lung capacity or is running their coils very hot.
     

    Users who are viewing this thread