At one time, or I have purchased with the data/charging board. One can use third party boards in them, like the SXK's with Micro-USB, or Delro's with USB-C.
You can look at the Cthulu site for dimensions, but I think small screen to match the atom chip.
I think I have one or two of the Target minis in storage from the big stock up a few years ago where we thought the FDA was going to shut down vaping.If you can find it anywhere, my tiniest mod is the Vaporesso target mini 1st version. It's limited to 22mm and below attys, but it's also more tube shaped that your two which you may not want. Dimensions 36.5 x 24.2 x 58.1 mm
Here's an old pic of mine:
The Brunhilde 103 is the more versatile of the Brunhilde's. You can put two coils in and use both sides of the airflow and have it at a higher wattage for a DL vape or you can completely close off the one side of the a/f and just use a single coil for a Brilliant RDL vape!I love RDTAs.......... I do not have a 103 (yet) so someone correct me if I am off on something...... From what I am seeing, the 103 is designed to be a higher wattage DL atomizer rather than RDL.... But with that said, people claim the flavor is outstanding and it provides lots of airflow wide open,,,,,, Lots of power, clouds and flavor,,,,, So if you want to operate at lower wattage (RDL) it would probably be wiser to pick a different RTDA..... Either it's little Brother or something else..... If you like operating at high power and don't mind toking off of a long telephone pole then the 103 is for you LOL... Some people are put off by it's tall size but personally i wouldn't care what it looked like just so long as it vaped good.... I have no class
Your post has brought an important point out about RDL vaping...... I have been a high wattage vaper for a long time but I have been "trying" to transition into a lower wattage RDL style of vaping.... But that is when I started running into problems with atomizers.......
The problem I have experienced is that if I use a DL atty and want to do RDL vaping with it then the flavor suffers when the power is reduced.... For example: I own a Oxva Arbiter solo RTA... It is specifically designed for BOTH MTL and RDL vaping.... It is touted as having excellent flavor in both RDL and MTL........... The flavor for me is almost non existent.... Sure, it produces good vapor at say 25 or 30 watts but there is also hardly any flavor..... I have tried every type of coil and configuration and nothing has helped......I mention this because that is the way it has been with most all RTAs while trying to do RDL style of vaping......
There are scores of MTL and DL atty's but finding a decent RDL one that provides flavor is a chore for me..... I don't know folks, maybe I have become spoiled off of the intense flavor from RDAs and expect too much from other atty's..... I am thinking on giving the Meson single coiler a try and see if I can get a flavorful RDL style of vape off the thing using a smaller coil....
Oh, and another strange thing...... I own a few MTL atty's and none of them have any flavor either..... I have several friends who are tootle puffers and they tell me they get excellent flavor while doing MTL..... Sort of makes me wonder what is the matter with myself?
I only use the single coil in my 103's and vape at 23.2 watts for a mouth watering RDL
I'd very highly recommend one
I am in the middle of trying to transition too. I have, for 8+ years, been a high wattage DL vaper. 70VG. DIY only. Because I suspect a sensitivity to VG, I am trying to tone it down. VG wise and wattage. I am having a really hard time going to anything under 50 watts.
I did buy a Zenith tank recently to see if it would help me transition to RDL but have not set it up yet.
I have been adding a few drops of distilled water to my tanks every time I fill them and it seems to have made an improvement.
I have been trying, for over a week, to sit down and mix somethings at 60VG or maybe 65 and add distilled water at 5-8%.
Ok I am feeling quilty as hell, placed an order on both Brunhildes the 1o3 and mtl. Can't decide on a pair so fine, if I can't have both, I'll have none at all...
...I am a doomed man, with my flaws of undecidefullness...
...I am a doomed man, with my flaws of undecidefullness...
Instead of distilled water, add rather more pg and use a thinner wire, the watts could at some cases remain the same, you just might to dial down your twists. I have found water muting flavours while pg only enforces flavour. When PG hits too hard it means your coil vaporizes too much liquid, also, up your nic levels, mtl is way different, while DL delivers a satisfying punch at 3mg mtl could need even up to 20mg nic, for you have decreased levels of vapour, you inhale a lot less stuff, included nic.
Yeah I know exactly what you mean..... The VG manufacturers have made a ton of money off of me over the years LOL..... I usually mix at 75 to 80% VG ........... My problem is two-fold..... One problem is that I plow through juice and batteries......... The other problem is that the flavor seems muted using lower wattage atomizers.......... I mixed up a few juices today at 50-50 and it did help with getting a bit of flavor on the MTL tanks but it is still nowhere near what I am used to.......... I think I got spoiled off of using RDAs.....
So, to help keep batteries charged a bit longer, I will go to a single coil atomizer and run the wattage lots lower (25-50 watts maybe).......That will also keep me from consuming so much juice.... I have been checking out some single coil RTAs and have my eye on a couple of them
I can run a single coil in some of my atomizers but it messes up the flavor and so I will get a tank that is designed specifically for a single coil and has a condensed chamber.
The Brunhilde 103 is the more versatile of the Brunhilde's. You can put two coils in and use both sides of the airflow and have it at a higher wattage for a DL vape or you can completely close off the one side of the a/f and just use a single coil for a Brilliant RDL vape!
I only use the single coil in my 103's and vape at 23.2 watts for a mouth watering RDL
I'd very highly recommend one
Yep, from all that I have seen, the 103 is an awesome RTDA.... Those German engineers got it going on
I was going to get one and add it to my arsenal but have never gotten around to it.... Another German tank that is a single coiler is the Lindwurm..... I do not have one of those either but it is also supposed to be pretty good.
The Lindwurm was ok but not great in my opinion. I just got the Meson RTA in the mail today for review. It’s supposed to be really good.Yep, from all that I have seen, the 103 is an awesome RTDA.... Those German engineers got it going on
Nothing new on the shiny front for me.
I wrapped a fresh Ni80 fused clapton for the Qbix just now - enjoying that crisp, new coil taste (thanks for the reminder Ange )
The anodised finish on this blue SXK delro has held up well - a few little nicks and scratches, but for the amount of use it's had, not bad.
I wrapped a fresh Ni80 fused clapton for the Qbix just now - enjoying that crisp, new coil taste (thanks for the reminder Ange
)The anodised finish on this blue SXK delro has held up well - a few little nicks and scratches, but for the amount of use it's had, not bad.
Yep, funny you mention that because that is the EXACT RTA that I have had my eyes on and was going to purchase..... I am liking what I see in the Meson...... I hope it's as good as it looks..... I have always liked Steam Crave products..... If I am not mistaken this is the fisrt time they have ever released a small single coiler as they usually come out with huge RTAs.
Good evening Shiny's
Caught that van
Caught that van
Similar threads
- Locked
