Thanks. I may look for a roll to try. I’ve been using a lot of Ni80 coils any. I’ve gotten lazy and have been using a lot of prewound coils.It's a very tasty wire and I'd definitely recommend giving it a go Mate! I've always used Ni80 and it's fairly easy to wrap a coil with. You can get a thicker gauge wire to suit your vaping needs, I vape at 23 watts with my 0.8mm×0.2mm if you want a vape closer to 30-35 watts you would be better off with a gauge around 1mm×0.3mm. Because the wire is very thin it heats up very fast and my nichrome heats up extra fast
I'm seconding 0.8mm X 0.2mm ni80 ribbon wire. It's easy to coil, plenty of surface area and it's so much easier to keep clean than my favourite tricore fused claptons.
I used to get my wire from FT but my recent order of ribbon wire came from Zivipf NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25 that's the 0.8mm×0.2mm that I grabbed, there's plenty more gauges available.
No doubt top companies like Temco and Wireoptim would have ribbon wire available too
I used to get my wire from FT but my recent order of ribbon wire came from Zivipf NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25 that's the 0.8mm×0.2mm that I grabbed, there's plenty more gauges available.
No doubt top companies like Temco and Wireoptim would have ribbon wire available too
Wireoptm only has it .8 x .1 and the resistance is much higher.
Thank you so very much FranGood morning,Dan.Have a wonderful day,
I hope you're weekend has kicked off to a fantastic start!!
You may be better off putting a small order in at Zivipf. The prices are very good both for the products and the shipping internationally.
This wire will give you a nice vape in the low to mid 20 watt range, NiChrome Flat Wire 0.8x0.2mm / .031*.008" - AWG 25 this is my 0.8mm×0.2mm wire.
If you want something up to around 30-35 watts this one would be better, NiChrome Flat Wire 0.8x0.3mm / .031*.012" - AWG 23 this one is 0.8mm wide ×0.3mm thick.
The thicker the wire that you use the higher wattage you need to crank your mod up! It doesn't matter too much about the width, that will just mean more or less wraps which doesn't alter the ramp up with ribbon wire because it's so bloody thin!!
Well, it kind of has. A lot of work got done on the addition to my room.Thank you so very much Fran
good afternoon folks,
2 out of 3 done, probably need to polish the last one a bit more, And then I have to dremmel out the part that is around the batt tube on 2 mods
The plan later is to change the chipset and insert Dicodes BF 60 chipset.
Has anyone seen mixx toffee, and offers for it?
PS, I found out why I couldn't get into the Vi Class firmware, we have to buy additional equipment, SX Link.
2 out of 3 done, probably need to polish the last one a bit more, And then I have to dremmel out the part that is around the batt tube on 2 mods
The plan later is to change the chipset and insert Dicodes BF 60 chipset.
Has anyone seen mixx toffee, and offers for it?
PS, I found out why I couldn't get into the Vi Class firmware, we have to buy additional equipment, SX Link.
I'm looking forward to seeing some pics!!
Good morning shiny people. It feels good to be caught up on reviews. I had a flavor order arrive with some new to me flavors so may take a look at trying
Good morning ladies and gentlemen,
I don't want to say that I have finished buying for this year, maybe until autumn though.
I have 4 atty lists, brands, kayfun, rba, dot, mods I don't count, if I buy mods it should be with dicodes chipset, non dicodes tend to collect dust.
I don't want to say that I have finished buying for this year, maybe until autumn though.
I have 4 atty lists, brands, kayfun, rba, dot, mods I don't count, if I buy mods it should be with dicodes chipset, non dicodes tend to collect dust.
Good morning Shiny's
good luck with that. I think everyone says something similar when they join this thread. And then the buying/spending/hoarding begins. LOL
Similar threads
- Locked
