Haven't seen either and am checking them out so you're helping me figure out the current market Really appreciate it!
No worries, I've been out of things for a while @hittman so I've missed out on a few things and got some to catch up on.
Like I missed out on the Fat Rabbit and Fat Rabbit Solo, and someone really piqued my interest with the Voltrove 25mm V3.
Just wish things were cheaper or I had more money to invest.
Like I missed out on the Fat Rabbit and Fat Rabbit Solo, and someone really piqued my interest with the Voltrove 25mm V3.
Just wish things were cheaper or I had more money to invest.
I bought the Voltrove after seeing the review by session drummer. It’s a nice tank but I haven’t been using it lately. No real reason. I just have had so much stuff for review that I haven’t gotten it back out.
This one is a steal. No logo . Not sure if it's USB C but it's a DNA 60 with escribe connect. The PEI will last forever.Regarding mid-ends: One I could find is the SXK BB, which I would buy immediately if they didn't insist on copying the dang logo. It's just too much for me
Buy SXK BB Style 60W All-in-One VW Box Mod Vape Kit Brown PEI
The SXK BB Style mod is constructed from PEI with an all-in-one design. It is powered by 1 x 18650 battery (Not Included) and maximum power output is 60W. The box mod is powered by Evolv DNA 60 chip.This BB Box comes with USB port for firmware upgrading, setting modification and user...
Seemed a very clean and purposeful design compared to many, and for once the price isn't totally ridiculous compared with some.
I still have questions with the Voltrove 25mm V3 though, mainly can the base and build deck be totally disassembled. As I've come across way too many RTA's where you can't do that.
Which is great for the manufacturer as they can sell more, but not so great for the consumer.
Just I like things that you can clean properly and service yourself, things that can last you.
I'd also like to see some older products redesigned and re-released, as there has been some great ones that could have been even better.
Like the Geekvape Ammit 25 RTA, that could be improved on so much and it was good to begin with.
I still have questions with the Voltrove 25mm V3 though, mainly can the base and build deck be totally disassembled. As I've come across way too many RTA's where you can't do that.
Which is great for the manufacturer as they can sell more, but not so great for the consumer.
Just I like things that you can clean properly and service yourself, things that can last you.
I'd also like to see some older products redesigned and re-released, as there has been some great ones that could have been even better.
Like the Geekvape Ammit 25 RTA, that could be improved on so much and it was good to begin with.
Good morning Shiny's
Nomz order arrived yesterday, going to create and mix a couple with the ssa premium raspberry.
Nomz order arrived yesterday, going to create and mix a couple with the ssa premium raspberry.
I don't know if this helps but here's the review I mentioned.
Voltrove 25 v.3 RTA Reviewed by SessionDrummer
If you've never heard of, or decided to purchase a Voltrove, you MIGHT want to read this review. This one is claimed to be a real flavor chucker, AND in either Single, or Dual coil mode, so we will just see about that. Hang on, buckle up, grab...
www.e-cigarette-forum.com
Hmmm, my favorite RTA of all time, and I still use 3 (out of 6) daily. Closely followed by the Taifun Gt4.
What changes would you like to see?
Edit: I have lost the little airflow detents on one.
Pro: Opposing coil legs, perfect airflow for me, short or long mode, 25mm
Changes: bayonet mount refill, More stout, base is 24mm. Be able to break down fully
Last edited:
I only have one Ammit RTA, the famous MTL 24, the only atty I've never gotten to work through a tank. 
I paid 42$ for it because I had to have it in gun metal.
I paid 42$ for it because I had to have it in gun metal.
Well, for one being able to fully break down the base into components would be first on my list with the Ammit 25 @ShamrockPat. So that the O ring that's used for the tank section juice flow control can be inspected and or replaced, and the airflow capture system can be worked on as well.
Airflow under the coil reduced and centered, side airflow lowered and angled to base of coil.
Increase the size of the parts of the deck that are used for coil capture to reduce chamber volume a little more, and use a really old school system of being able to drop the coil into slots which have a m3 grub screw to secure the coil.
Hopefully you get some of my ideas there, not major changes exactly just ones to improve on what was already there.
Last edited:
My only Ammit is the first one Geekvape came out with - a tall 22mm single coil atty (just called the Ammit RTA). Never liked it much at the time when I was more in to dual coil builds. Should try it again and see how I like it today.I only have one Ammit RTA, the famous MTL 24, the only atty I've never gotten to work through a tank.
I paid 42$ for it because I had to have it in gun metal.
Morning shinies
A vote for the Stubby 18650 - it's brilliant. And although it's a 21700 the Veepon Tita X is tiny.
I know this is a long shot, but does anyone know if the following is in production: A high-end compact metal boro with USB-C?
Regarding mid-ends: One I could find is the SXK BB, which I would buy immediately if they didn't insist on copying the dang logo. It's just too much for me
If not, the Stubby AIO 18650 might end up higher on my list. It has many advantages apart from its thickness, including easy re-wicking.
A vote for the Stubby 18650 - it's brilliant. And although it's a 21700 the Veepon Tita X is tiny.
Back in the day I bought a bunch of Ammit rdas for flavor testing. I think I ended up with like six of them. I am pretty sure that somewhere I have the MTL rta that was mentioned earlier. One of my go to rtas is the original Zeus rta. I think I counted 15 when I did inventory. I almost always have at least one in rotation.
Similar threads
- Locked
