Shinyitis Support Group

[Dieseler]

And... anyone who's built on a joyetech CLR, a Kanger STM rba or the smok BB RBA won't have any problem with it.

When I open up one of my 24 or 25mm thingies, it's almost like having enough room to climb in there to work.

Used JoyeTech clr's exclusively rebuilt them etc now have hundreds of them for Mrs and i and no need really to make new coils just re-wick them but do save them for gaskets etc like i really need to Nope but just do for some reason.
Then the innokin ares came out never tried a rta and will just say its very easy to coil and wick and also to fill happy to have 3 ares plus several clr's set ups in rotation.

 

[Skunk!]

Doge Pup Pup 16mm Ceramic Squonking RDA - Congrevape® | Vaping Perfected.
OMG. WANT!!!
I really wish it wasn't being crowd funded, but that is so amazing I'm gonna throw money at it...

I have 2 Doge2s still I still use from time to time after years of faithful service. Whenever I get around to getting a squonker I will definitely put a Doge atty on top of it.If you want to wait for the crowdfunding to finish they will hit the market soon after and they have always been reasonably priced. I'm happy to see they are still making them.

 

[Joru'us C'baoth]

I have 2 Doge2s still I still use after years of faithful service. Whenever I get around to getting a squonker I will definitely put a Doge atty on top of it.If you want to wait for the crowdfunding to finish they will hit the market soon after and they have always been reasonably priced. I'm happy to see they are still making them.

I have a V4, I like it, but I can't see trying to make it bf. Simply too difficult, and I prefer single coil for a bf atty anyway...

 

[Skunk!]

I have a V4, I like it, but I can't see trying to make it bf. Simply too difficult, and I prefer single coil for a bf atty anyway...

I meant the the Doge pup. I loved my V2s I got them the day they came out. At the time they were great, but I have no intention of converting one of them. They have served me well and have been put in the museum. That ceramic pup though. I am very interested in that. I will wait until they release it though.

 

[Joru'us C'baoth]

Seems bf atties smaller than 22mm are a th

I meant the the Doge pup. I loved my V2s I got them the day they came out. At the time they were great, but I have no intention of converting one of them. They have served me well and have been put in the museum. That ceramic pup though. I amvery interezted in that. I will wait until they release it though.

Sadly, I don't see that happening. What I failed to notice was that the crowd fund ended last year...

 

[Skunk!]

Time to get down to business. @Letitia Thanks again for the creamy base recipe. I have a feeling that is going to be used a lot

 

[Skunk!]

Seems bf atties smaller than 22mm are a th

Sadly, I don't see that happening. What I failed to notice was that the crowd fund ended last year...

Ahhh. That's too bad. There are plenty other options out there. Honestly I thought they were done making Doges. Haven't seen them anywhere for a while.

 

[NolaMel]

Katdarling has a thread on ECF - I think she started it anyway, if not her then DPLongo22 did.. good thread, they all love them.

We talk about the Jac here and there on the DB forum , they’re our Troop leaders

 

[NolaMel]

Lol! I think I was reading the same threads about it and decided I HAD to get one as well!

Hope your supplies arrive tomorrow with the storm. I have vape mail coming as well but won’t be holding my breath.

Hopefully they’re south of y’alls snowy mess... two packages due tomorrow,so they should be somewhere close to Louisiana. I love that steampunk, despite its weight, it has great hand feel

 

[NolaMel]

I was probably talking about using twisted 28ga SS in the Wasp, but I was shooting for a target resistance of 0.35-ish because of the Squeeze's 50 Watt limit.

My usual build is using 26ga single wire SS on either a 7/64" drill bit or a 1/8" bamboo skewer. About 10 wraps gets me about 0.70 Ohms. That's too high for the Squeeze and the Wasp is a single coil atty. So I twist 28ga to get more metal in there for more mass and more heat potential.

If you're looking for a cooler vape and lower wattage, about 12 wraps of SS316 in 28ga single wire will get you about 1.2 Ohms.

Thank you! Somehow I forgot to add bamboo skewers to my vape list . And to the Peanut Gallery, yes, I wrote that down

 

[untar]

That's a bit smaller than I anticipated but ok

 

[Letitia]

It's how you use it...

Part truth and part myth.

 

[Coastal Cowboy]

Used JoyeTech clr's exclusively rebuilt them etc now have hundreds of them for Mrs and i and no need really to make new coils just re-wick them but do save them for gaskets etc like i really need to Nope but just do for some reason.
Then the innokin ares came out never tried a rta and will just say its very easy to coil and wick and also to fill happy to have 3 ares plus several clr's set ups in rotation.

I used the CLR in Tron tanks which... God bless'em... looked great but just didn't have the airflow I was looking for. That was when I was getting serious about mastering temp control and the resistance kept jumping around after refills.

 

[Skunk!]

That's a bit smaller than I anticipated but ok
View attachment 730717

Like Sickbxy said "It's how you use it."

 

[Skunk!]

That's a bit smaller than I anticipated but ok
View attachment 730717

That's the new Doge flea.

 

[NolaMel]

Used JoyeTech clr's exclusively rebuilt them etc now have hundreds of them for Mrs and i and no need really to make new coils just re-wick them but do save them for gaskets etc like i really need to Nope but just do for some reason.
Then the innokin ares came out never tried a rta and will just say its very easy to coil and wick and also to fill happy to have 3 ares plus several clr's set ups in rotation.

Good to hear, I have one coming tomorrow. Thought I’d learn to build on the ares, then tackle the other two

 

[the wind]

@NolaMel Do it do it do it

 

[whodat2112]

Happy Humpday Everyone!!!!!

 

[Letitia]

Off to get happy. Catch up later if I still read.

 

[Fidola13]

Hopefully they’re south of y’alls snowy mess... two packages due tomorrow,so they should be somewhere close to Louisiana. I love that steampunk, despite its weight, it has great hand feel

It is REALLY heavy lol! I couldn’t believe it when I took it out of the box. Feels like a tank. Hopefully it’s built like a tank and lasts a long time. I really like it. Figured out TC and it’s wonderful. Enjoy yours when you get it.

Are you in Louisiana? That’s were my family is and has been for a couple hundred of years. Baton Rouge area mostly. St Gabriel’s Parish. I was adopted and raised in Boston but have been to LA several times. Beautiful except the humidity ugh!!!