Shinyitis Support Group

[wickedalibi]

I mtl 1~1.5 Oohms @ 10 to 15 1watts.
I have had the prime, beserker mini, and the siren v2.I have had to tighten the 510 pin that came loose on the prime. It also has a tendency to flood a little. The beserker is the tightest draw but it is small. It is what I take to work. All metal. The siren is the easiest to build and wic and my favorite.

 

[Letitia]

I’m not sure one of those is the Aspire in the pictures. . Of course I wouldn’t recognize a squonk if it bit me.

Maybe, shelve this back in the closet and order the ares or??? What is mtl, easy to build, won’t leak and is top fill (preferably without having to uncap). See, I’m not picky at all

You can practice installing a coil and wick a couple to practice. Since it is a dual I doubt you would want to vape on it. I'm going to check out the doggy style thread and see if that would suit you.

 

[NolaMel]

Letitia, just tell me what to order . Then you can have some peace. And, then I can learn to squonk and make JFC at least crack a smile

 

[wickedalibi]

None of them leak. The beserker is the touchiest to fill. They all are uncapped and fill.

 

[wickedalibi]

Lemo v2 a no uncapping to fill.

 

[NolaMel]

I mtl 1~1.5 Oohms @ 10 to 15 1watts.
I have had the prime, beserker mini, and the siren v2.I have had to tighten the 510 pin that came loose on the prime. It also has a tendency to flood a little. The beserker is the tightest draw but it is small. It is what I take to work. All metal. The siren is the easiest to build and wic and my favorite.

I’m a loose mtl, or tight dl... not sure which. I have every air hole open on my zenith

 

[NolaMel]

I mtl 1~1.5 Oohms @ 10 to 15 1watts.
I have had the prime, beserker mini, and the siren v2.I have had to tighten the 510 pin that came loose on the prime. It also has a tendency to flood a little. The beserker is the tightest draw but it is small. It is what I take to work. All metal. The siren is the easiest to build and wic and my favorite.

Siren sounds promising. So, y’all are saying the only way to fill ANY of them is to unscrew the cap?

 

[Letitia]

@bigbob2322 Can you please educate NolaMel a bit about the SXK Doggie Style rta. Is if new builder friendly?

 

[untar]

Basically Dj got mad at them and used his status as a reviewer to try to cost them subs and suppliers.
More or less told every reviewer he could that the were being paid 5k to give good reviews to certain companies.

I was looking into the jai VOD of the stream and that is only their side of the story. They were alluding he did this because of "mental problems", didn't invite him onto the stream when he was in the chat (which would obviously have made for a great stream) and the conversation suddenly "was over" when he tried to share some links to I-don't-know-what.

I'm not trying to take sides here or defend Daniel, I simply don't have enough background knowledge to do that either way, but just from the stream I find it obvious that it's not the whole story. There has got to be more, nobody in their right mind just one day out of the blue decides they're mad and need to smear two specific persons.

To clarify my DJLSB-fan-level: I'll watch a mod review when I need to see the entrails of a mod for a repair or when I'm entertaining the idea of buying one. I don't religiously watch his channel or anything, just appreciate the work he puts into some reviews and content you can barely find somewhere else.

 

[NolaMel]

@bigbob2322 Can you please educate NolaMel a bit about the SXK Doggie Style rta. Is if new builder friendly?

Letitia, you’re stuck with me! No one else has your patience lol

 

[Letitia]

Siren sounds promising. So, y’all are saying the only way to fill ANY of them is to unscrew the cap?

What you need is out of my wheel house. Just trying to find you some options. Sometimes bottom fill is not a bad thing, especially with mtl.

 

[wickedalibi]

That is why I like the siren. I run it with all 5 wrinkles open.

 

[KC0YNU]

I’m a loose mtl, or tight dl... not sure which. I have every air hole open on my zenith

there is a Zeus for sale in the classies

 

[wickedalibi]

Lol ^+%#%#$^ auto correct. Air holes

 

[Letitia]

Letitia, you’re stuck with me! No one else has your patience lol

I'm happy to be your velcro Mel.

 

[KC0YNU]

The top fill on the Zeus is easy to use IMHO
single coil
AF is adjustable
longer drip tip with a 810 to 510 adapter aids in tighter draw

 

[untar]

SXK Doggie Style rta. Is if new builder friendly?

I'd be careful with recommending plastic tanks, some liquids obliterate them. An atty with a glass tank doesn't have that problem and I'd consider it more newbie friendly.

 

[Zutankhamun]

I'd be careful with recommending plastic tanks, some liquids obliterate them. An atty with a glass tank doesn't have that problem and I'd consider it more newbie friendly.

I know that’s true and ‘tank cracker’ juices are called that for good reason.
I must say though, I have used lemon and various sharp tangy liquids and I’ve never broken one!
The most I’ve ever got is some clouding of the plastic when it’s had juice sitting or constantly in use over time.

 

[Letitia]

I'd be careful with recommending plastic tanks, some liquids obliterate them. An atty with a glass tank doesn't have that problem and I'd consider it more newbie friendly.

They haven't come out with a glass option yet? I thought I'd read someone found one that worked. Maybe I'm remembering the wrong atty.

 

[Joru'us C'baoth]

View attachment 729561 View attachment 729563 View attachment 729565 View attachment 729567 View attachment 729569
I figured stock photos would be better than what I could take... this mess doesn’t look promising

I just got wood! That looks fun!