Well, I made the first sketches for that back in summer, there was no gbox so I wasn't inspired by itLooks a lot like the G-Box I have coming -the pink color
There's only so many meaningful ways you can arrange 2 batteries, a 510+bottle and a board with buttons, that one just happens to be the one where the board is the furthest away from the juice.
I also have some sketches of a diamond-footprint and a more T-shaped one, as well as a box style (but that wouldn't be very nice to hold). I'm working on one with an irregular shape and 2 doors for batteries and bottle as well, will have to see which one is the most promising, practical and compact design, not decided yet.
Man, BTW, I have fallen in love with my Cylon mod and an Ares tank on top. I don't even think it looks ugly any more. Kinda manly perhaps, I did consider trying to give it to the husband, but I like it too much! LOL. The hand feel is phenomenal, I like the fire button, I even like the rubbery grip (which really feels great and etc. Very happy with my purchase.
I think I may sell my punk. It's my least favorite "carry mod" and I am considering putting my zenith tank on my revenger. They might look okay together, and I am loving the tank that came with the kit less and less... .
Anna
I think I may sell my punk. It's my least favorite "carry mod" and I am considering putting my zenith tank on my revenger. They might look okay together, and I am loving the tank that came with the kit less and less... .
Anna
Read a review Mjag put out for the Ehpro Iguana mech squonker kit. Have to say it is pretty sweet. 20700 (21700 is a bit too big and affects door fit), good rda, attractive, rounded edges and comfortable in hand. Not released yet. Maybe when Ehpro get some feedback the final release will accommodate the 21700 as well.
Ehpro Iguana 20700 Squonk kit review by Mjag...Oh momma, you wanna see this!
Ehpro Iguana 20700 Squonk kit review by Mjag...Oh momma, you wanna see this!
Shinyitis never sleeps, LOL. It doesn't! I'm quite sure mods and tanks float through my dreams, although I don't remember ordering any of them.
That doesn't mean they weren't ordered, either. I'm a sleep-walker/doer. Okay, it's mostly sleep eating I engage in but man, I could see myself "coming to" as it were, with my FT cart loaded up with $500 worth of gear. I hope I come too before I press the "paypal" button.
Also an early riser, but I'm fairly certain SOMEONE is on this thread, 24-7. LOL.
Anna
That doesn't mean they weren't ordered, either. I'm a sleep-walker/doer. Okay, it's mostly sleep eating I engage in but man, I could see myself "coming to" as it were, with my FT cart loaded up with $500 worth of gear. I hope I come too before I press the "paypal" button.
Also an early riser, but I'm fairly certain SOMEONE is on this thread, 24-7. LOL.
Anna
Oh, the shiny group sleeps like a rock, the only things awake after 1 am are the skunks, possoms, and occasionally a dog!
I’m sure someone else answered first, my first non ego was the sigelei zmax v1, but I think Provape came before sigelei. After coffee I’ll hit up google if no one else has found out
Ugh... coffee hasn’t kicked in, just got a nasty dry hit on my Ares 
. Tank didn’t come with a low juice alarm apparently
. Tank didn’t come with a low juice alarm apparently
That is what temp control is for!Ugh... coffee hasn’t kicked in, just got a nasty dry hit on my Ares
I think my next goal after stocking up on nicotine (gallon or two) will be getting a decent 3d printer...
Buckle up, the decent ones start at about $15000 for small stuff
If by "decent" you mean "not total garbage" then you might be able to get one starting at $300
I saw some reviews for some around $1200, they seemed decent... I could be wrong...Buckle up, the decent ones start at about $15000 for small stuff
If by "decent" you mean "not total garbage" then you might be able to get one starting at $300
Last edited:
I accept responsibility for this post only when something goes right.
It depends what your definition of "decent" is. For me that means I can print a big range of plastic materials, including fibre/bead reinforced ones, ideally surface finishing and strut removal is reduced to a minimum.
Some of those around $1000-$2000 are just beefier versions of the smaller ones, more durable, a bit more precise and mainly printing faster but without significant change in what they're able to do.
I'm not looking into it all the time so I might have missed something big. Personally I'm toying with the idea of getting a small home 5 axis CNC... that's about $5000
but it doesn't have the problems printers have.
Went to Eciggity and put in notification alert when the new Paranormal with upgrade is in stock. Would rather have another Therion but suspect LV is taking the Therion in another direction. Paranormal will have the same hand feel at least.
I am in no rush. Excellent design shape, I do like an edge squonk.Depending on how patient you are
View attachment 732209
this is my current iteration, fire button/board on the side opposed to 510 and bottle. I have back designs for both 75c and 250c, the 510 is designed for a varitube 30mm. I'm struggling a bit with getting print cost down (print all in one and separate the parts is my goal) and designing the battery compartment, might take a few months judging by my current speed of progress
Design might also change, I have 2 other designs in mind and am working on a 3rd. I'll release it to the public for free though once it's done.
I have used 30mm Varitube smooth tops in the past, the only thing I don't like about their BF 510's is the threaded pipe and dual nut configuration. I use a drill and file to clean off the lower threads for the bottle tube.
I put a MM510BF in my 75C printed squonker and they are so much nicer to work with, stiffer spring, larger positive nut and smooth tube. I also like how the ModMaker come in one size and you just add a washer to fit the size of the enclosure indent.
In the long run, either 510 is fine by me. I should bring in a few of Fat Daddy's BF's to see how they are, I have had good results with his regular 510 connectors.
You are going to SLS print it I assume? Alumide? If it's cheaper to get multiples printed, I would be very interested in one for myself. It would save me trying to find a print service here, let me know when you get quotes on printing it.
Similar threads
- Locked
