Welcome Tony01 and thanks for sharing. We all have the same problem as you and this is where we come. We will help you with your addiction by showing ours
That is not a problem, I can adapt or modify.
The 810 on the Glaz RTA is quite sloppy and loose. A little triple core fused around the inside of the top cap slot with a tad smaller o-ring makes standard 810 drip tips fit perfectly snug now.
Hey @Letitia don’t have the pico anymore, it was stolen in June was running stock sw. I was using a tube mech as well as a pico squeeze with an rta on it that I was planning to modify the case into a side by side. Which I’m still planning on doing.
For DNA mods I was actually hoping to make my own with a 60 or 75w board. I was looking at the macro but may not like the overhang, and others. I been looking at the Therion and others but then stop myself, remembering the shinyitis. Then decide I wanna make my own, then realize I’m too deep in other custom projects right now (building a lightweight electric motorcycle from scratch).
I think of all the stuff I’d want hardware wise from a custom vape. Then I realize how ridiculous all of this sounds while I have the ipower dvarw in my hand. LOL!
Far as the pico squeeze SxS I’m planning on cutting the bottom half off and making a longer battery cap, same size as the doggy tank. Be a great setup. An efficient, compact mech with a button that will never fail, that you can plug in to charge.
was running stock sw. I was using a tube mech as well as a pico squeeze with an rta on it that I was planning to modify the case into a side by side. Which I’m still planning on doing.For DNA mods I was actually hoping to make my own with a 60 or 75w board. I was looking at the macro but may not like the overhang, and others. I been looking at the Therion and others but then stop myself, remembering the shinyitis. Then decide I wanna make my own, then realize I’m too deep in other custom projects right now (building a lightweight electric motorcycle from scratch).
I think of all the stuff I’d want hardware wise from a custom vape. Then I realize how ridiculous all of this sounds while I have the ipower dvarw in my hand. LOL!
Far as the pico squeeze SxS I’m planning on cutting the bottom half off and making a longer battery cap, same size as the doggy tank. Be a great setup. An efficient, compact mech with a button that will never fail, that you can plug in to charge.
Last edited:
Nice! I have found they work on most of the stuff I have. I tried them out on everything once. They are quite short so be careful not to burn your lips. The stem is also quite short but is enough to get a good fit. I mostly use them on the GR1. It has a plastic top cap and doesn't get hot at all. For the price they are cool little DT's i love them on tiny attys to make them even tinier.That is not a problem, I can adapt or modify.
The 810 on the Glaz RTA is quite sloppy and loose. A little triple core fused around the inside of the top cap slot with a tad smaller o-ring makes standard 810 drip tips fit perfectly snug now.
View attachment 765881
Last edited:
Have you found the modder's forum yet. You'll find some like minded vaper's around here. Tools and I don't get on well together so I buy everything pre assembled. Keeps the world a safer place.Hey @Letitia don’t have the pico anymore, it was stolen in June
For DNA mods I was actually hoping to make my own with a 60 or 75w board. I was looking at the macro but may not like the overhang, and others. I been looking at the Therion and others but then stop myself, remembering the shinyitis. Then decide I wanna make my own, then realize I’m too deep in other custom projects right now (building a lightweight electric motorcycle from scratch).
I think of all the stuff I’d want hardware wise from a custom vape. Then I realize how ridiculous all of this sounds while I have the ipower dvarw in my hand. LOL!
Far as the pico squeeze SxS I’m planning on cutting the bottom half off and making a longer battery cap, same size as the doggy tank. Be a great setup. An efficient, compact mech with a button that will never fail, that you can plug in to charge.
Our favorite TrollDragon is like you.
my problem with the glaz is that the top cap has a fondness for sliding open in my pocket.That is not a problem, I can adapt or modify.
The 810 on the Glaz RTA is quite sloppy and loose. A little triple core fused around the inside of the top cap slot with a tad smaller o-ring makes standard 810 drip tips fit perfectly snug now.
View attachment 765881
Mine too, only happened just once so far.
I suggested to Maggie @ SC that they put a spring/ball bearing type of latch on the sliding top. She told me she would pass that suggestion along to the designer.
For now we will have to start putting a vape band around the top like the Smok TVF8, TFV12 and Baby Beast users do to keep their junk closed.
good idea! need to get me a vape band... have never used them.Mine too, only happened just once so far.
I suggested to Maggie @ SC that they put a spring/ball bearing type of latch on the sliding top. She told me she would pass that suggestion along to the designer.
For now we will have to start putting a vape band around the top like the Smok TVF8, TFV12 and Baby Beast users do to keep their junk closed.
Going to a smaller home in a good neighbourhood is to me one of the wise moves ATM. I did that after my father passed and I don't regret it.
As for credit cards, I was 16 years without one. After I started cashing on my retirement, the bank gave me one. I use it just to build up my credit, but in very small amount since now they're charging 120% over non paid charges. So it's just used to pay Netflix and Spotify. Get rid of the physical (after you write down the number) and toss it.
caught up, mostly.
this thread does move at a certain, relentless, pace.
no shiny buying for various reasons (probably won't be until next month) but good to see what's hot with you all and see what you're up to.
this thread does move at a certain, relentless, pace.
no shiny buying for various reasons (probably won't be until next month) but good to see what's hot with you all and see what you're up to.
Good morning, oh fellow travellers of iridescence.
It has been raining all night, but at least the sheep and cows got a wash. Mrs OG has gone out, so I'm safe for the immediate time being.
Apparently, I have 2 packages due today, and one tomorrow. I'll believe it when I see it, the package that was meant to be delivered at the end of the week arrived yesterday, and one that was meant to arrive yesterday has been rescheduled for today.
Not that I'm complaining. As long as they don't get my shiny bits wet.
Will post pictures (smudging out the address labels) as the action happens. After this week, my vaping budget, has well, evapeourated (groan).
It has been raining all night, but at least the sheep and cows got a wash. Mrs OG has gone out, so I'm safe for the immediate time being.
Apparently, I have 2 packages due today, and one tomorrow. I'll believe it when I see it, the package that was meant to be delivered at the end of the week arrived yesterday, and one that was meant to arrive yesterday has been rescheduled for today.
Not that I'm complaining. As long as they don't get my shiny bits wet.
Will post pictures (smudging out the address labels) as the action happens. After this week, my vaping budget, has well, evapeourated (groan).
In the 90’s, even though I was working and made decent money, and my name was on my mortgage ( along with hubby’s) I found I had no credit rating. That’s how they did it then, married women at least got zero credit. I had to do a 90 days same as cash thing on tires I had cash to buy. That got me a credit score - a really low one, but better than nothing.
Then I was able to get a credit card. And once I did that, I got offers from everyone every week.
My credit was in the excellent range when my husband died. I never got a single offer until It dropped 50 points instantly. Then, I was still ‘good’. And the iffers started coming again. Now that I’ve got it up again, no more offers. So that’s how they work. They don’t make money off people like me who pay that stuff off every month. I only use it for convenience and never pay interest.
They’re looking for people who need to borrow, can probably eventually pay it back, but not before paying some interest.
Downside is, my interest rate is high, and no cc will give me lower. Because if they do snag me, they want it to be worth the wait lol. So if I have to pay for something on credit, I’ll use my revolving second mortgage, interest is low on that.
Bah. My shinies are a hot air heating element and a bottom heating element for my oven
Found the exact same model and maker in the Czech republic for 1/3rd the price the local supplier sells it, so instead of 150+€ I'm paying 45€... what a bunch of scammers
Found the exact same model and maker in the Czech republic for 1/3rd the price the local supplier sells it, so instead of 150+€ I'm paying 45€... what a bunch of scammers
Shiny stuff. Ni chrome, Stainless Steel shiny stuff. Round twisty things. Snippy bits.
Bonus points if you can identify the bits I had to add as they were not supplied.
Bonus points if you can identify the bits I had to add as they were not supplied.
Magnifying glass is a useful add on you threw I there.
And good morning! I have one package of juice arriving that made their flight from Memphis back to NY yesterday afternoon. I hope they had a comfy seat.
Similar threads
- Locked
