Invoke is a small dual.Exactly!. For dual batteries, I’m down to just the 3 DBs after the thinning of the herd. I haven’t bought a dual in a while, was hoping for something new and shiny
. At least I didn’t buy the asmodus and end up disappointed in the quality
This is the same, much more readily available... Anything 22 mm rebuildable???They are itty bitty. That one's 18350. They make an 18650 that's not much bigger. They aren't cheap tho.
Invoke is a small dual.
Search says that's a pod system...or Joyetech Runabout. Basically same mod though.
The Hcigar Wildwolf is great!Exactly!. For dual batteries, I’m down to just the 3 DBs after the thinning of the herd. I haven’t bought a dual in a while, was hoping for something new and shiny
. At least I didn’t buy the asmodus and end up disappointed in the quality
Para is a bit heavier than a Therion Mel. If you aren't interested in tc or replay there are lighter duals.Lost vape paranormal might be too big?
It is big. Maybe the Modefined? Remember it's still Lost Vape without the whistles.Lost vape paranormal might be too big?
You do have a few workarounds. Go for a hair dryer instead of a heat gun. Works just as well for rewrapping and is a dual use item to present to the Mrs. And the muji can always be something you thought she needed for her makeup so you're covered there.

Search says that's a pod system...
In all fairness I am pretty sure dripped juice ruined the raw.Don’t tell me that! I was debating between getting the black for $60, or the raw for $90 straight from asmodus. I was ready to pull the trigger!


I love the mod too and will not be giving up on them. For the pink with the wonky door, I think I get your drift on what to do. I have crafty stuff that might get me there. Some foam or some felt that is sticky on one side. I am more concerned with the raw. I took the screws out of the battery housing to see if it would come loose and if I could clean up the juice that way but even with screws removed nothing came loose. I wrote to my guy at Asmodus who has found me pars before and asked them to let me send it in. That was late Friday and I have not heard back yet.My raw Minikin V2 came with a sloppy battery door. You could feel the edge of the door as you slid your finger across the side of the mod and it wobbled. I put the battery door in the vise and gave it a little squeeze to bring the side edges closer together. Now it's perfectly flush, just apply a tiny bit of pressure at a time and test fit out of the vise after each squeeze.
To fix the wobble I used a piece of very thin insulation (sticky one side) from my headphone modding supplies. Stuck a little strip in the top corner and that removed all of the wobble. You could do the same with a couple of layers of painters/masking tape, I had the insulation around so I used it instead.
The insulation I used is the small square in the lower left corner 0.3-0.5mm thick.
View attachment 778073
Applied here on mine but you would place it wherever the high spot is on your door.
Sorry for the poor picture.
View attachment 778075
Love the mod and those minor QC issues with the door were easily fixable.