First 2 I found was Simatech Vapour Shop in Vancouver and Flamingo Vape Shop in Winnipeg. Both have B&M stores which you could call. Never shopped from either so can’t speak for them.
If interested I have a Gucci Phobia squonk pin
You got any of them King-Priv-T-Tank-Baby-XLs with RBA deck?
Evening Shinies,
Hope everyone is doing OK, especially those on the West Coast.
It is now official - my shiny budget is now exhausted, and when all the orders arrive I will have enough vaping kit to face Armageddon (provided there is still mains electricity).
I made a major blunder which I now realise is totally my own fault, I was persuaded by the siren call of convenience and cost over the sensible advice of shopping around. As a consequence, Amazon are getting a set of 18650's returned as soon as I can get a label printed. Not only was I sent the wrong cells, but I suspect they are counterfeit as they don't have the same markings as the other set I have. Serves me right for trying to slither out of paying carriage. Please don't berate me too much - I've learned my lesson and gone to Fogstar.
More photos on the way later, Mrs OG is requesting my cooking skills. Chicken curry and rice.
Visited the new tobacco juice today as often as I could. I was just aerating it, honest. The fact that my nose was jammed deep inside the bottle is purely circumstantial and as there are no photos .....
Hope everyone is doing OK, especially those on the West Coast.
It is now official - my shiny budget is now exhausted, and when all the orders arrive I will have enough vaping kit to face Armageddon (provided there is still mains electricity).
I made a major blunder which I now realise is totally my own fault, I was persuaded by the siren call of convenience and cost over the sensible advice of shopping around. As a consequence, Amazon are getting a set of 18650's returned as soon as I can get a label printed. Not only was I sent the wrong cells, but I suspect they are counterfeit as they don't have the same markings as the other set I have. Serves me right for trying to slither out of paying carriage. Please don't berate me too much - I've learned my lesson and gone to Fogstar.
More photos on the way later, Mrs OG is requesting my cooking skills. Chicken curry and rice.
Visited the new tobacco juice today as often as I could. I was just aerating it, honest. The fact that my nose was jammed deep inside the bottle is purely circumstantial and as there are no photos .....
BooYeah Flat Wire will soon be inbound!
NiChrome Flat Wire 0.8x0.3mm / .031*.012" - AWG 23
SS Flat Wire V4A 0.8x0.3mm / .032*.012" - AWG 23
K-A1 Flat Wire 0.8*0.3mm / .031*.012" - AWG 23
Zivipf has all the goods!
I will soon haz that "cuule wape" on my Tauren that Morten speaks so fondly of.
NiChrome Flat Wire 0.8x0.3mm / .031*.012" - AWG 23
SS Flat Wire V4A 0.8x0.3mm / .032*.012" - AWG 23
K-A1 Flat Wire 0.8*0.3mm / .031*.012" - AWG 23
Zivipf has all the goods!
I will soon haz that "cuule wape" on my Tauren that Morten speaks so fondly of.
Hey @dom qp there was a new member in The Shed today with some Armor gear...
His Juma Half looks awesome!
View attachment 779807
I'm not a fan of the step down look, not a huge fan of juma either... but .......n those colours look good together.
And this is an armor free zone. At least until I get my bonus.
It received some good reviews but I haven’t seen any owner’s thoughts. I’m concerned it’s too big or bulky. Although it’s kinda shaped like the Minikin 2 which I very comfortable to hold.
Thanks.
I own the Blade. Nice mod – very big though but that is expected for a dual 2x700 bat mod. Don’t own the Minikin but from memory seeing it in stores, this device is a lot bigger. However it is pretty light for it’s size. Works well, typical Geekvape menu.
I purchased the black version. Not really black…kinda speckled. But the finish is rubberized application which is slowly starting to peel on the bottom. The plastic underneath is black.
Really appreciate your feedback. Even though it’s light I think I’ll pass because of the size. Still plenty of shinys to buy
!!
Question to my fellow Canadian Fasttech shoppers. I have been in search for white (clear) Pulse 80 squonk bottles which seem to be as rare in Canada as a pink panda in the artic. My searching leads me to Fasttech. Given I seriously suffer from postal anxiety, and that I have never ordered anything for personal use from China, is there anything I can expect? Duties, brokerage fees, who do they use to ship within Canada, etc. The more info the better! I am guessing it will take a few weeks so figured I’d make it worth my while and order a few other trinkets. Haven’t decided yet but another Lost Vape DNA250C may be in order which could bring the shipment to around $200 CAN. However, willing to forgo more expensive items if that means customs is more likely to turn a blind eye.
Or….if anyone knows where I could purchase (5+) white Pulse 80 squonk bottles within Canada for a reasonable price that would be preferred. Has to be white….I find the other colours retain odor and change the flavour of the juice. Thx in advance.
Oh…and one more question. Given I am a Fasttech newb, what’s up with the price differences with the same product? Not talking about authentic vs styled, but the exact same product with perhaps a different finish - even though these finishes carry the same price here in Canada.
Or….if anyone knows where I could purchase (5+) white Pulse 80 squonk bottles within Canada for a reasonable price that would be preferred. Has to be white….I find the other colours retain odor and change the flavour of the juice. Thx in advance.
Oh…and one more question. Given I am a Fasttech newb, what’s up with the price differences with the same product? Not talking about authentic vs styled, but the exact same product with perhaps a different finish - even though these finishes carry the same price here in Canada.
I haven't had any issues with vape products sent from china. China post, customs, Canada post seems to be the hand off. No extra costs. My last mod from China arrived in 10 days, that was the week before the rolling strike though.
Another brilliant metaphor to add to my collection @Punk In Drublic
.BTW, they can be found spending some time along with the rocking horse droppings, hens teeth, snowballs in hades, and of course, Elvis.
I like the Bogan and I find him pretty genuine and entertaining. I also like my Bonza RDA a lot for it's ridiculously deep juice well and smooth airflow, so I was pretty interested to see what the Bonza 1.5 was all about along with his forthcoming mech tube.
Gotta say, that black finish looks pretty hideous. The RDA looks OK. Not a game changer but OK. Ya bloody dickheads.
Gotta say, that black finish looks pretty hideous. The RDA looks OK. Not a game changer but OK. Ya bloody dickheads.
Get e-packet, it gets handed off to Canada Post for delivery. They don't charge brokerage. The only they they charge is a 9,99$ fee if they have to collect duty/GST on delivery.
Every order i've had from fasttech they declared 'electronic replacement parts' @ 20 US value. This is not high enough for GST or duty, so it just gets put into my mailbox. Our good friend Trudeau raised the limit from 20 to 100 for duty/gst to be waived. So you should be good regardless.
I never order from China these days. Used to take me ~3 weeks. I have a friend who recently ordered from 3fvape and he got his package in like a week.
I was curious if anyone owns a Marvec Priest BF DNA75C? I'm wondering if this is a good option instead of a Therion bf?
Similar threads
- Locked
