Shinyitis Support Group

[stols001]

aking you off diazepam like that is not the proper way to do it.

No one is "taking me off" valium like that. I am working with what I have. Like I said, my doc is in Italy at the moment.

You can cross-taper using different short acting benzos and clonidine (a detox med) and believe me when I say I was NOT planning to stop the Diazepam like that, I was gonna go more gradually with my cross-taper but like I can't get it until noon.

I'm alive. Semi functional but yes, I agree with you IT SUCKS.

Fortunately for me I understand scientific studies, some pharmacology, and also have some good pharmacist sites.

But no I am not happy.

Anna

 

[Heartsdelight]

Thank you The burp??

After filling & right after screwing on the top cap I just flip the atty/mod upside down & let the ejuice flow to the bottom to release any air pressure. Then flip back upright.

 

[NolaMel]

My new shiny rta ... a Tripod. Flavor heaven!!!
View attachment 823429

Jealous!!!! The extension kit is coming soon. It’ll include per atmizoo :
“Last steps before 3.4ml kit is released.

It will include:
- one chimney extension tube with inner hole D=3.0mm
- one chimney extension tube with inner hole D=4.0mm
- one higher borosilicate glass tank
- retail price 19.84 euros

Details remaining for the lab guys plus packaging after that. Hopefully it’s a matter of one week, perhaps a bit more or anything close to that.

So time for a first glance Seems to me 0.6cm is not much of a height increase.
(Total height of 3.4ml version 45.0mm)”

 

[Spydro]

Been another typical up all nighter (can't sleep). So I'm checking this off right now...

 

[Letitia]

i still haven't had a hair cut after that... trim.

I do remember that. I impulsively cut my hair once, it didn't go well. Luckily my hair grows fast and my hair guy is talented.

 

[DeloresRose]

I got up early today, 6:30AM, and thought I was entirely in another time zone.
Until my gonzo coffee brought everything to near razor sharp focus.

I drink Deathwish regardless of how late/early I wake up.

 

[Letitia]

I always forget with FT. Is it 5 days or 7 days that means 1 to 2 months?

7 days is Chinese for oos. My last 2 orders that had 5 days actually shipped in 5 days.

 

[Letitia]

Morning all
Another unusually productive morning. Going to have to break down and get the flavors reorganized so I can get back to my ease into the day mornings. Been avoiding that chore like the plague.

 

[lupinehorror]

overlord clone on 3F for $18.99? wasn't passing that up. black on brass.

 

[Letitia]

overlord clone on 3F for $18.99? wasn't passing that up. black on brass.

That drought didn’t last long.

 

[TrollDragon]

Here is a good photo for wicking both Prime and nKFL. The build areas are identical right down to size. Some have had a finicky go of getting the wicking just right but I don't think you'll have any problems. Not my photo...
View attachment 823477 That photo has too much wick in it. It is too long. The shoulders shouldn't be up that high.

The important thing to take away is the open area under each side of the wick by the coil or wick shoulders. Keeping the cotton off the center (positive) block will prevent any juice from going down into the air flow. Also if you trim your cotton down to the first o-ring (and not above) but not beyond then your cotton will perfectly touch the bottoms of the juice wells.

I trim about 40% bulk off my cotton wick. You don't want a bunch of wick in the juice wells. I trim my wick from both sides of one end right up to the coil and repeat on the opposite side. Then place into the juice wells making sure the cotton is touching the bottom of the well. Works perfectly for me every time. If you use rayon you want to trim closer to 50% off your wick.

Let me know if you need anything when you get them and I'll be happy to help. There is also a thread for the authentic Prime that has massive amounts of info on wicking. I'll dig that up for you.

Nasty loop is NASTY....

Fix It! Fix It NAO!

 

[Eskie]

Nasty loop is NASTY....

Fix It! Fix It NAO!
View attachment 823491

My, we're getting picky. Who woke up to decaf instead of regular coffee?

 

[lupinehorror]

That drought didn’t last long.

agreed but it isn't yet july

 

[charlie1465]

@TrollDragon

 

[TrollDragon]

My, we're getting picky. Who woke up to decaf instead of regular coffee?

Decaf is like 0mg juice, whats the point?

That tight coil will pull the wick away from the closest loop causing TC headaches.

 

[TrollDragon]

@TrollDragon

Looks like a Mark Todd coil... I don't have a problem with those as they are crooked AF but the loops are somewhat consistent.

I never understood those ultra wide spaced builds, they never really worked for me.

 

[jim_87]

That's really helpful....and despite my list i am a DL to restricted DL. I recently found out that I really like the likes of the Venna wide open so i'm hoping that anything I bought will be no tighter than that....

I definitely like the look of this one and if my first 6 go well I may look at a purchase....the thing is my background with RDA's is not good....I tried them when they first came out, they leaked all over me so I swore never to go near such cr*p again......and, ahem, here we are

Have you tried the Profile Unity mesh rta? I love it. It may fit your restricted DL/ DL likes.

 

[NolaMel]

Frenzy is here!!! Wow, it’s TINY!! Giving the coil a bit to prime so I can try it out. I do wish the tank wasn’t so dark, it’s hard to see the juice line.

 

[Fidola13]

Good afternoon Shinys!! I hope everyone is playing with their new shiny gear or waiting on their vape mail today. I received several shinys yesterday and feel overwhelmed with how bright the shiny is. It doesn’t help that I can’t use my left hand much. So I’m a bit frustrated in trying to play w new shiny stuff.

I have an avulsion fracture where thumb bones hookup with hand bones. So my thumb /hand is now in a compression wrap and splint. It’s amazing how much one can’t do or at least can’t do well when the non-dominant thumb is out of commission.

I’m just sooooo grateful I was bored over the weekend and rebuilt and/or rewicked almost ALL my RBAs. And this is also a perfect way to prove that keeping a couple of sub ohm tanks with drop in coils is a smart idea.

I do actually have more Shiny Vape Mail arriving today that I’m REALLY psyched about. It’s not a newly released mod but it’s a mod I’ve wanted for awhile but the exact edition I wanted was never available when I was searching for it. So I stopped looking for it and poof it just popped up!!

So far it’s been a busy week for Shiny vape deals. I’m seriously almost out of my settlement cash. I think I’ve “invested” wisely lol! Only another shiny vape enthusiast would agree though definitely NOT my cpa!!!

So here’s to everyone’s shiny dreams come true!!!


Ps I need a manual as to what the emojis mean on this forum.

 

[jandrew]

...
Ps I need a manual as to what the emojis mean on this forum.

Same as words ... they mean just what you choose them to mean—neither more nor less.

I'm sure Humpty agrees.