I have to quit ordering cheap vape gear from china. But I just can’tstrange thing to be hooked on.
I'd say if you're avoiding smok mods and/or kits (and others with less than great reputations) and can honestly afford what you're buying...have at it. Personally, I figure as long as I'm spending the same or less than I did on my smokes all the years I had that nasty habit, it's all good. Now I also have things to show for my money, and they aren't adversely affecting my health the way the smokes did.
Or, you could just start ordering more expensive stuff, like stols001 mentioned above, from the US and/or the UK.
turn it upside down and let it drip,then take a q tip or twisted tissue and go into the chimney.
I agree on that. Much easier to build than I thought. It vapes beautifully. Mine came out at 0.67ohm, but plan to build the other one at 1.0ohm. I got two RBAs and two pods extra....that way I can just swop the pods with different builds and flavors over. Man I love this thing.Smoant Pasido RBA Coil and it was tough but not as bad as I thought it would be, very little. It's vaping great with flavor that's above average and plenty of clouds also
2 incoming.......Aromamizer Lite, gunmetal, from VaporDNA. XvoStick DNA40, blue, bought from friend.
VaporDNA is having a 50% off sale. Discounted at register, otherwise use code "BIGSTEP" in honor of the first moon landing. I believe it's still on.
Steam Crave Aromamizer Lite 23mm RTA | Singe Coil, MTL, DL – VaporDNA
As per reviews, the AL is more of a RL RTA.
VaporDNA is having a 50% off sale. Discounted at register, otherwise use code "BIGSTEP" in honor of the first moon landing. I believe it's still on.
Steam Crave Aromamizer Lite 23mm RTA | Singe Coil, MTL, DL – VaporDNA
As per reviews, the AL is more of a RL RTA.
@stols001, a few tips for sussing the Expromizer V4.
2.5mm coil ID seems optimal, but depending upon how you manage your tails you could possibly go up to 3mm.
Wicking needs to be long enough to go to the bottom of the wells (at least the width of the base is a good starting point), and the wells need to be nicely filled otherwise liquid or juice just starts leaking.
Hopefully these pointers will give you some ideas, and also look at Vaping with Vic's build and review on YouTube if you get stuck.
Still one of the coolest names - ExVape Expromizer V4 Review
2.5mm coil ID seems optimal, but depending upon how you manage your tails you could possibly go up to 3mm.
Wicking needs to be long enough to go to the bottom of the wells (at least the width of the base is a good starting point), and the wells need to be nicely filled otherwise liquid or juice just starts leaking.
Hopefully these pointers will give you some ideas, and also look at Vaping with Vic's build and review on YouTube if you get stuck.
Still one of the coolest names - ExVape Expromizer V4 Review
Last edited:
How are you liking yours, Mordacai?
I bought shiny stuff today and non-shiny stuff
In the non-shiny category I got more cotton, boring 28ga wire and non-boring coilology mtl fused clapton wire. @ShowMeTwice is responsible for that one
In the shiny category - I got a typhoon btd clone rda. Was going to get another hussar v1 for the Luna, and then I was going to get a Flave - but I just really like the deck of the typhoon, so it won
In the non-shiny category I got more cotton, boring 28ga wire and non-boring coilology mtl fused clapton wire. @ShowMeTwice is responsible for that one
In the shiny category - I got a typhoon btd clone rda. Was going to get another hussar v1 for the Luna, and then I was going to get a Flave - but I just really like the deck of the typhoon, so it won
morning all.
FT still charged my card for the cancelled bb. i always use paypal but didn't this time for... financial reasons. refund in 3-5 days their prompt support maintain. i do hope so. the '5' day wait for the DNA bb to ship has begun.
weather warnings out for rain will make for 2 nasty commutes. might have to break out the aegis.
FT still charged my card for the cancelled bb. i always use paypal but didn't this time for... financial reasons. refund in 3-5 days their prompt support maintain. i do hope so. the '5' day wait for the DNA bb to ship has begun.
weather warnings out for rain will make for 2 nasty commutes. might have to break out the aegis.
If you want to go stabwood BB panels let me know and i'll put you in touch with a really good guy in the USA. Panels only.....120$ If you want tips ans buttons too it's extra
Mine should be posted out soon. I got a lovely burl wood....
Good afternoon Shinies
It's 13h00 in sunny France and the temp is gradually going up to that canicule level again. Hope that you guys get some fresh air from the North soon....humidity and heat is not good.
Got some Nic coming today and a few other things that i'm not sure about....we shall see
It's 13h00 in sunny France and the temp is gradually going up to that canicule level again. Hope that you guys get some fresh air from the North soon....humidity and heat is not good.
Got some Nic coming today and a few other things that i'm not sure about....we shall see
Good morning shiners! Temp finally broke here, but expecting rain this afternoon through tomorrow, which after that impossible weather is fine by me.
Morning all!
The heat has moved on from me, and it’s supposed to rain much of the day. Suits me just fine, the plants needed it. If I get the chance, I’ll go out and give them some food.
I still haven’t done anything with that elder dragon. I meant to do it yesterday but I was having one of those days when everything I touched went sideways. Maybe today.
The heat has moved on from me, and it’s supposed to rain much of the day. Suits me just fine, the plants needed it. If I get the chance, I’ll go out and give them some food.
I still haven’t done anything with that elder dragon. I meant to do it yesterday but I was having one of those days when everything I touched went sideways. Maybe today.
Let us (me) know how that elder dragon performs. I was thinking about it but the airflow setup looks odd and noisy to me. Not sure of the flavor the way it's set up, but if it's good it might earn a place in a cart somewhere.
crikey they look good and thanks for the kind offer but i'll be attempting it myself. got a piece finished really well recently.If you want to go stabwood BB panels let me know and i'll put you in touch with a really good guy in the USA. Panels only.....120$ If you want tips ans buttons too it's extra
Mine should be posted out soon. I got a lovely burl wood....
Your braver than me. I know they can be done by hand but it's difficult to be precise. Perhaps you can post pics through your work process....?? That'll be really interesting
The panels coming to me are done via a CNC setup. They are sliced to the correct thickness allowing for the polish and then turned by the CNC exactly spot on a replacement BB panel. It's the routing that's going to be difficult
Will do. I like the looks of the deck but it really doesn’t look like it’s going to be airy enough for me. Then again, the Recurve is surprisingly not as restricting as I’d have expected.
Disappointing news: an email from Fasttech this morning informed me that my order for the Soulkeeper had been canceled because the item has been discontinued.
Curses.
Curses.
Similar threads
- Locked
