TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
Morning shinies :)

I got one of my fasttech orders through yesterday. Included was an Aromanizer V2. A flash-e-vapor, a dvarw dl, a doggy style, a blue gloom, another gold dna BB and lots of of classy drip tips. I also got myself a single coil deck for the aromaniser...i just don't want to build too low these days..

Anyone use the single coil deck or is the standard dual coil deck better??

Enjoy your day everyone :)
I was never a fan of any of Steam Craves single decks, they all need a big build in them to shine IMHO. I assume you mean the Aromamizer Supreme V2 as the Aromamizer V2 is a totally different duck.

I run dual 0.3mm x 0.8mm flatware builds on the Velocity deck in my Supreme V2s around 80W. The new Supreme V2s come with the postless deck stock now and it works perfectly too, actually easier to build and wick than the Velocity.

If you like the Supreme V2 then the Plus is a 30mm version and my go-to tank (3 in daily rotation) with the 15ml bubble glass.

Sent from my KFKAWI using Tapatalk
 

lupinehorror

bròn
Supporting Member
ECF Veteran
Verified Member
Jul 11, 2017
3,265
22,602
Dunblane
not shiny but slightly related to it... new tattoo has just been finished. think that's 9. pretty sure it's 9.
unlikely anyone here will be getting inked in bonny scotland but i recommend tribe tattoo if you do. nice rhyme there if i do say so myself.
tracking updates? an impasse has been reached.
nearly went with the ipv 3 mini auto squonk this morning. nearly.
evening all.
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
I was never a fan of any of Steam Craves single decks, they all need a big build in them to shine IMHO. I assume you mean the Aromamizer Supreme V2 as the Aromamizer V2 is a totally different duck.

I run dual 0.3mm x 0.8mm flatware builds on the Velocity deck in my Supreme V2s around 80W. The new Supreme V2s come with the postless deck stock now and it works perfectly too, actually easier to build and wick than the Velocity.

If you like the Supreme V2 then the Plus is a 30mm version and my go-to tank (3 in daily rotation) with the 15ml bubble glass.

Sent from my KFKAWI using Tapatalk
Hi Charles

Thanks for getting back to me on this. Yes it is the supreme and I knew you were a fan that's partly why I got one because everyone was raving about them.

So have you actually tried the single coil deck? I'll probably take your advice and build a dual set up the first time if only to get a bench mark on throat hit and flavour.

Currently breaking in an EUC coil in the BB....they take a bit of careful handling to get the best out of them I hear :)
 

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
Morning shinies :)

I got one of my fasttech orders through yesterday. Included was an Aromanizer V2. A flash-e-vapor, a dvarw dl, a doggy style, a blue gloom, another gold DNA BB and lots of of classy drip tips. I also got myself a single coil deck for the aromaniser...i just don't want to build too low these days..

Anyone use the single coil deck or is the standard dual coil deck better??

Enjoy your day everyone :)
I use 3 single coil decks.
 

Fidola13

Totally Stashed!
Supporting Member
ECF Veteran
Verified Member
Dec 20, 2017
10,225
57,023
Boston
Nah. I think @Fidola13 has me beat.

Has you beat with what???? No competition here anyways!!! -

Just lots of love for some beautiful hobby “collectibles” that we can all appreciate and be happy for others when they are happy!!!

Some people see vape gear as cigarettes replacements. Others have turned it up a notch (or two lol) and are enjoying these devices just like other hobbiests enjoy whatever they’re into.

Vape mods, Russian dolls, pet rocks who cares as long as we’re enjoying it and have others to enjoy it with too!!
 

Fidola13

Totally Stashed!
Supporting Member
ECF Veteran
Verified Member
Dec 20, 2017
10,225
57,023
Boston
Morning shinies :)

I got one of my fasttech orders through yesterday. Included was an Aromanizer V2. A flash-e-vapor, a dvarw dl, a doggy style, a blue gloom, another gold DNA BB and lots of of classy drip tips. I also got myself a single coil deck for the aromaniser...i just don't want to build too low these days..

Anyone use the single coil deck or is the standard dual coil deck better??

Enjoy your day everyone :)

I use the single coil deck with the Supreme V2 and the Aromizer V2. it’s the same deck for both the Supreme V2 and Aromamizer V2. I also have the postless deck. I put the single coil deck in and it hasn’t been taken out since. You can build some nice sized coils with the single deck. I usually use an id of 3.5 to 4.0mm depending on the type of build which for me is usually pretty simple. Great flavor imo. Just play around with the placement so it’s lining up with the airflow holes. Took me a couple of tries playing with it but not difficult at all.

Tip- remember to close off afc and juice control when not using. Sometimes you’ll get some “seeping” until you’ve got the wicking down 100%.

Steam Crave actually has some great instructions on its website because people were complaining about condensation vs seeping. Once I got the wicking spot on its never been a problem but I still shut off both.

Hope that helps and you enjoy it. The flavor is awesome. I don’t like many RTAs but that’ll be 2 RTAs I won’t part with.
 

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
And is the vape any good? Have you tried the dual config? I'd rather use the single if I can :)
Yes I enjoy it very much. For me, I’ve tried 3mm, 3.5mm id but 3mm Clapton’s or any other fancy wire works well.

I use rayon, for cotton wicking just make sure it’s fluffy & just sitting in the juice well.

For me since I vape anywhere from 29-34 watts works great. I have the airflow on the smaller slit side.

Yes I have tried it in dual coil mod. But I prefer to build single coil.

I think trolldragon likes more airflow & Vapes at higher wattages.
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,923
1
125,630
the Universe • ∞
@ShowMeTwice you talked me into the Atmizoo Tripod Rta. 2fdeal has the Ulton clone with the 3.4ml extension tank on a presale for $25.99. Expected to ship 8/10. They have a 6% off code “August” until the 3rd I think.
I hope you like and enjoy it!!! :wub:
The Tripod rocks!!! :headbang: <--- Gee if I tried that with my neck I would be hurting haha.

7 August is the day I am waiting for. Batch II of the Tripod will be released. Yay, and this time I'm getting the ss matte as I have the ss ice matte. I'm going to keep one of my Tripod's in 2ml mode (but with an extension in stash) and my original in 3.4ml mode.
 

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
I hope you like and enjoy it!!! :wub:
The Tripod rocks!!! :headbang: <--- Gee if I tried that with my neck I would be hurting haha.

7 August is the day I am waiting for. Batch II of the Tripod will be released. Yay, and this time I'm getting the ss matte as I have the ss ice matte. I'm going to keep one of my Tripod's in 2ml mode (but with an extension in stash) and my original in 3.4ml mode.
Yours is the authentic though :D

Are you using it with the airflow plugs or fully open?
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Yes I enjoy it very much. For me, I’ve tried 3mm, 3.5mm id but 3mm Clapton’s or any other fancy wire works well.

I use rayon, for cotton wicking just make sure it’s fluffy & just sitting in the juice well.

I hope I don't get any sign of leakage otherwise that will put me off big time. You're right that trolldragon vapes at 80 watts which he says is the sweet spot.....but yes totally different vaping style to me.


I use the single coil deck with the Supreme V2 and the Aromizer V2. it’s the same deck for both the Supreme V2 and Aromamizer V2. I also have the postless deck. I put the single coil deck in and it hasn’t been taken out since. You can build some nice sized coils with the single deck. I usually use an id of 3.5 to 4.0mm depending on the type of build which for me is usually pretty simple. Great flavor imo. Just play around with the placement so it’s lining up with the airflow holes. Took me a couple of tries playing with it but not difficult at all.

Thank you very much you two...it's been a big help. I guess the bigger diameter coil will help you to get plenty of cotton in there if it's a bit temperamental :)

I start with some trepidation now i've heard that the atty leaks if you don't wick it right......but we shall see I shall probably set it up tomorrow as it's mid evening here.

Thanks again you two :wub:
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Today I am mostly vaping two of my BB's with fresh watermelon juice diy :)

20190801_182346.jpg
 

Attachments

  • 20190801_182354.jpg
    20190801_182354.jpg
    794.2 KB · Views: 3

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
I hope I don't get any sign of leakage otherwise that will put me off big time. You're right that trolldragon vapes at 80 watts which he says is the sweet spot.....but yes totally different vaping style to me.




Thank you very much you two...it's been a big help. I guess the bigger diameter coil will help you to get plenty of cotton in there if it's a bit temperamental :)

I start with some trepidation now i've heard that the atty leaks if you don't wick it right......but we shall see I shall probably set it up tomorrow as it's mid evening here.

Thanks again you two :wub:
You’ll be fine! It’s really no different than any other rta in that too much wick, you will get a dry hit. Too little you’ll get leakage.
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,923
1
125,630
the Universe • ∞
Yours is the authentic though :D

Are you using it with the airflow plugs or fully open?
Currently I have the 1.5mm AF insert installed. For me it's a very comfortable MTL and I'm able to get a nice restricted DL with it. Not too tight nor too airy. It's running a 36/28 ss316L clapton at 0.7Ω and in TC on a JAC. I've been through all the AF inserts and enjoy switching it up with every build. Every type of wire I've tried works great.

I did try the Tripod wide open with a low build just to see how it did with DL. It was nice but with the 4mm AF it was way too airy for me. I did generate my very own huge clouds though lol. With the airflow ring I was able to bring it down from 4mm to a more comfy vape for me. RDL/MTL works real nice with the 1.8mm AF insert installed.
 

Users who are viewing this thread