jandrew

Ultra Member
ECF Veteran
Apr 2, 2013
2,109
12,361
Winnipeg
A bit of shiny arrived today --- Berserker mini styled rta (FT):
berserker-mini-rta.jpg

Should also have a couple clone Dvarw 22mm and a couple authentic Merlin Nano 18mm RTAs in this week --- just to have some rta options for the pipesmith epipe (when it is completed ... patience grasshopper, patience).
 

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,610
63,106
toledo ohio
View attachment 834649
I believe that the black ring that’s on the blind pin is the insulator.

I unscrewed my C4 with the blind pin in to show you. I don’t have a Bunker but I do think the black ring around your blind pin is the insulator.

Yes, it is, but it’s not enough to keep the pin sticking out a bit.
 

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
@DeloresRose that is strange, the blind pin shouldn’t sit flush at the bottom of the Bunker. I think you can gently remove the grey insulator & put on the blind pin.

I don’t know if you can buy generic blind pins that will fit the Bunker though, someone with more knowledge than I will answer, I hope.

Edit: sorry, you were asking for where to buy the insulators. Perhaps FT?
 

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,610
63,106
toledo ohio
View attachment 834653
On the C4 the insulator is on the bottom of the atty.

I’ve been taking pins out of all my atties, lol. And all of the Bunkers, that insulator comes out. None of the others do that. Weird.

I suppose I could add another tiny O ring or two...
 

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
I’ve been taking pins out of all my atties, lol. And all of the Bunkers, that insulator comes out. None of the others do that. Weird.

I suppose I could add another tiny O ring or two...
Can you try to gently remove the grey insulator? To put on the blind pin? It should come right off.
 

Opinionated

ECF Guru
ECF Veteran
Verified Member
Aug 19, 2015
11,168
59,365
56
My Mountain
How are you? Long time no see :D:D


I'm doing alright.. about to shore up my nicotine supplies and then say done is done, that is all she wrote..

my husband is getting laid off, so dealing with the concern that at our age this is probably it. He's 58, and laid off at 58 is never good..

But other than that doing really good.. :)

Just have nicotine on my mind lately.. I think we could make a country music song out of that.. haha
 

Heartsdelight

Vaping Master
ECF Veteran
Nov 10, 2015
5,777
19,659
I'm doing alright.. about to shore up my nicotine supplies and then say done is done, that is all she wrote..

my husband is getting laid off, so dealing with the concern that at our age this is probably it. He's 58, and laid off at 58 is never good..

But other than that doing really good.. :)

Just have nicotine on my mind lately.. I think we could make a country music song out of that.. haha
I hope things will go smoothly & he will find another job soon! I understand the market & environment is crazy.

A Country music song “I have nicotine on my mind” will make a great song :toast:

Scares me too a bit as long as we have nic stored up we will feel lots better :)
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,924
1
125,632
the Universe • ∞
LOL nah I hate them :lol:. Way to yuppy for me.
I'm more worried if i'll need those stinky sticks over there. Leaving mid Sept.
I agree, I hate those things too. :D Apparently people have fallen over the edges of the Grand Canyon using them. Bright.

NASA to Daniel.....Your Luna Finally has Arrived in the country you:censored: Live in.....Over and Out:w00t:

My Lovely Luna got to the airport at 3:25 this afternoon:thumbs:
Now just has to clear through my friends at customs and I shall Squeeze in no time!
And the Galaxies RDTA has only been freshly built, just in time for the occasion:D
Ground control to Major Daniel ... Take your protein pills and put your helmet on.
Nine, eight ... three, two, one ...... Luna on radar!!! :lol:
Just be careful if you find yourself "floating in a most peculiar way".
 

Eskie

ECF Guru
ECF Veteran
Verified Member
May 6, 2016
16,087
77,744
NY
Turns out I do have some goodies coming in today. I'm getting a new pod to review delivered by DHL. I wish everything could come by DHL. Left Hong Kong on Friday, scheduled for tomorrow, but DHL got it to NY today so they're dropping it off (unlike FedEx which would leave it in the back of the truck until the day paid for). Hope to have a review up by the weekend. Kind of fun getting to do a review on something sent just for that purpose. The other is just more juice which is good, as I'm pretty parched over here.
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,924
1
125,632
the Universe • ∞
View attachment 834645

I was going to swap the squonk pin for the blind pin for use on a Rose Finch. The blind pin (right) doesn’t have that insulator on it though, and I don’t think I’ll wrestle it off the other pin in one piece. It screws in flush without it. Is there somewhere I can buy those insulators? Or should I just use a pin from another RDA?
On my RDA's when I remove either a BF or blind pin the insulator can be swapped between pins.
Can you take the insulator off of the BF pin? If so is there an o-ring underneath?
I would take the insulator off the BF pin if you can and use it on the blind pin.

Hope I'm understanding what you mean.

I've never seen spare parts listed for their atty's. I would send them an email, or phone them, and ask if you can buy spares. They are very good with selling spare parts but you have to ask. I have a Luna board coming that I bought from them for stash.
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,924
1
125,632
the Universe • ∞
Good morning Shiny's. I don't understand what is happening to the notifications for this thread. I have been here dozens of times over the weekend, and still none. I have even been giving everyone ratings as usual. I am still getting notifications from threads I rarely visit. I even tried unwatcing and then rewatching a few times, and still no notifications.o_O Anyone know what's going on?

BTW...A friend of mine is giving me a Dead Rabbit RDA on Wednesday for my birthday. I am so excited:w00t:
Notifications are all over the place. Sometimes I get them and other times I don't. Like yesterday I wasn't getting any from another thread until @AngeNZ tagged me and then I started getting them again. There is no rhyme or reason to it. Maybe try clearing your cache. Or go to your prefs and toggle notifications off. Log out and back in. Turn them back on. IDK, just some thoughts. :D
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,924
1
125,632
the Universe • ∞
View attachment 834643 My Asmodus Rose Finch in Brass has arrived from Sourcemore! :banana: Pretty quick, 9 days door to day :).

Quick question for everyone that got one from Sourcemore. Did yours come with extra earth magnets? Mine came with an extra 510 pin but no extra earth magnets.

There’s not many reviews on it. I found 1 in English, 1 in Russian? And 1 in Japanese. It seems that the ones who received 2-4 years ago had the extra magnets but the most recent Japanese review only contained the extra 510 pin.

Thanks guys & gals! :)
None of mine came with magnets. Only extra 510 pins. :)
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,924
1
125,632
the Universe • ∞
View attachment 834645

I was going to swap the squonk pin for the blind pin for use on a Rose Finch. The blind pin (right) doesn’t have that insulator on it though, and I don’t think I’ll wrestle it off the other pin in one piece. It screws in flush without it. Is there somewhere I can buy those insulators? Or should I just use a pin from another RDA?
I just compared your photo to @Heartsdelight 's pic ... her insulator is still in the RDA. Your insulator came out with the BF pin. Just pull it off and move it over to the blind pin and you will be fine.

Sorry if someone already posted this.
 

ShowMeTwice

Supporting Member
ECF Veteran
Jun 28, 2016
18,924
1
125,632
the Universe • ∞
Received another Dvarw MTL (clone) in vape mail. They sure are flavor bangers. It's on my DB v3 and also some mystery juice that I didn't label. :facepalm: Turned out to be a vanilla/butterscotch. Nice
IMG_1020cr1.jpg

The deck is super easy to build on ... and I do mean E A S Y. :thumb: It's awesome!!!

FT has them $15.66 Coppervape Dvarw MTL Styled RTA Rebuildable Tank Atomizer - 3.5ml / 316 stainless steel + PEI / 22mm diameter at FastTech - Worldwide Free Shipping
And they sell all the spares <for stash> needed. FT sells AF pins to open or tighten your draw. They also sell the DL version of the atty.
Insulators would likely be the most important. Followed by extra tank sections.
$1.60 Coppervape Insulator Kit for Dvarw MTL RTA Atomizer at FastTech - Worldwide Free Shipping
Spares including extra tank sections: FastTech - Gadgets and Electronics
 

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,610
63,106
toledo ohio
On my RDA's when I remove either a BF or blind pin the insulator can be swapped between pins.
Can you take the insulator off of the BF pin? If so is there an o-ring underneath?
I would take the insulator off the BF pin if you can and use it on the blind pin.

Hope I'm understanding what you mean.

I've never seen spare parts listed for their atty's. I would send them an email, or phone them, and ask if you can buy spares. They are very good with selling spare parts but you have to ask. I have a Luna board coming that I bought from them for stash.

You’re understanding just fine. I cannot get that thing off the pin though. Good idea to contact them.
 

Users who are viewing this thread