charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
How is the Bully going?
It's still looking as magnificent as I remember:D
I love it although these days I only occasionally feel like a rowdy build so the cloud chucking doesn't happen that often.

I'm planning to maybe drive to the next hamburg vape festival and it'll come in handy for the clouds on the last day :D
 

DeloresRose

Vaping Master
ECF Veteran
Apr 25, 2014
8,612
63,136
toledo ohio
Good morning shiners! I woke up and though it was Monday. Now I have a whole extra Sunday as a bonus! But there's no mail on Sundays, so sort of a waste.

Sunday’s are like a commercial break for me. I hurry up and catch up the laundry, write the bills, all that stuff so I don’t miss any action during the week.
 

muth

Ultra Member
ECF Veteran
May 20, 2014
1,911
7,845
Boston, MA, USA
Can you just reverse the direction of the drill?
You can do that. Then use nylon pliers to grasp it and pull it out a few times. After that, fasten one end to something or just grasp with regular pliers with the other end in the drill chuck and spin it until straightened (Don't think the direction will matter).
 

AvaOrchid

Ultra Member
ECF Veteran
Sep 19, 2019
2,197
8,316
USA
I feel really stupid for asking but are you sure? They do not even look like the coils that came with it or the Geekvapes
I can 100% guarantee that those coils do fit I'm using them right now they don't look like they would but they do fit. Actually there's like 10 plus different coils that will fit the Cerberus and out of all of them I would have to say at least the ones that I've tried the vaporesso ones are top of the line.
 

muth

Ultra Member
ECF Veteran
May 20, 2014
1,911
7,845
Boston, MA, USA
Does anyone here have any ideas on how to straighten twisted wire since a drill just unwinds it? I’ve never used it before and had a hard time winding my coils with the wire as is .
Ricky, I just posted a vid for you but I may have replied to chanelvaps question and not yours. Sorry, can you find it?
 

stols001

Moved On
ECF Veteran
May 30, 2017
29,338
108,119
I bought my first mech mod I plan to use! There is some site, called the Vape Factor that was selling of older (I guess some newer) mech mods for very cheap.

Although there were others that were far more drooly, I go this one! Because there is something less intimidating about having one as a kit and ready to go, etc. I think it's older, but I am like, "Anna you have been vaping 4 years now, it's time to take the plunge. I like it and all but SOME stuff. LOL I think I got a good deal at least, today it is gone....

th


Need to set up that banking account. Although, especially after my little spending spree I should have less money than I have, I think. But I don't. That kind of works for me...

It will take an 18650. At the puny levels I plan to try and vape at that works for me (although yes, I know, I know it's not the battery SIZE but type of battery and I have reread the Ohms law post where it finally made sense to me. I think I will be fine.

Anna
 

NolaMel

ECF Guru
ECF Veteran
Verified Member
Nov 17, 2012
12,815
80,994
New Orleans
I bought my first mech mod I plan to use! There is some site, called the Vape Factor that was selling of older (I guess some newer) mech mods for very cheap.

Although there were others that were far more drooly, I go this one! Because there is something less intimidating about having one as a kit and ready to go, etc. I think it's older, but I am like, "Anna you have been vaping 4 years now, it's time to take the plunge. I like it and all but SOME stuff. LOL I think I got a good deal at least, today it is gone....

th


Need to set up that banking account. Although, especially after my little spending spree I should have less money than I have, I think. But I don't. That kind of works for me...

It will take an 18650. At the puny levels I plan to try and vape at that works for me (although yes, I know, I know it's not the battery SIZE but type of battery and I have reread the Ohms law post where it finally made sense to me. I think I will be fine.

Anna
I bought the same one yesterday! It was one trolldragon recommended to me several months ago, but the lowest price I found was mod only for £80.
 

TrollDragon

ECF Guru
ECF Veteran
Dec 3, 2014
10,556
57,665
NS, Canada
This is my shiny setup that I just modified. The drip tip was falling off easily and I don't have any other drip tips that make sense to use. I put four dots of super glue to each corner of the drip tip and put it on so it's very well in place. Now I take this all over as my second mod. It's more than a backup because I switch off to it throughout the day from my Bident. When I am walking to work and back I use the Bident and at work I use this mod, the Jac with the Pharaoh Mini. No thoughts of a cigarette lately:)View attachment 855349
If the drip tip has a loose fit, just remove the o-rings and put a few of wraps of dental floss in the grooves, then put the o-rings back on. That should snug it up quite nicely and much better than glue...
 

stols001

Moved On
ECF Veteran
May 30, 2017
29,338
108,119
I bought the same one yesterday! It was one trolldragon recommended to me several months ago, but the lowest price I found was mod only for £80.

Yay we can be MTL-ish vape buddies! Hehe. I really liked it, no recommendation but I totally thought "Yep, I can start with that, it will do quite nicely." I couldn't even find the mod itself but the company seemed to get rave reviews. I am excited. LOL.

Anna
 

stols001

Moved On
ECF Veteran
May 30, 2017
29,338
108,119
If the drip tip has a loose fit, just remove the o-rings and put a few of wraps of dental floss in the grooves, then put the o-rings back on. That should snug it up quite nicely and much better than glue...

Or, you can just add a similar sized O-ring on top. That works nicely too. I just did that to one of mine this morning and it is solid as a rock. You don't want glue in that area, really truly, Dental floss is also a better option, I would avoid the flavored kinds, though.

MAN any second I am out of here and sooner than I THOUGHT. Bonus.

Anna
 

Zazie

ECF Guru? No!
Supporting Member
ECF Veteran
Nov 2, 2018
10,795
72,382
Maine, USA
Thanks for the concern :)

I live in Victoria BC Canada. I suppose I could try that I don’t want to see them get hurt.
I would take them all if I could .

I’ve been pretty down since failing to bring Stevie home. My mom says Mabye it’s not meant to be and I should try to get a wife. But I don’t want a woman I want my bunny home and safe. I’d like them all to
Be safe although It’s a pretty big problem and I wonder if they want to spend the resources fixing it . Or if bringing attention to the problem would cause them to be killed.
Can you live the carrier right next to her house with food in it? That would give her a chance to get used to it.
 

Ricky Vapes

Super Member
ECF Veteran
Sep 30, 2019
835
16,355
Can you live the carrier right next to her house with food in it? That would give her a chance to get used to it.
That’s what I’ve been doing since Friday. I thought the same thing :) Might just take time. I’m just worried about snow coming here quick. It’s very cold and getting to the point most of my work mates can’t stand being outside for long. My grandma says bunnies are tough though and have very warm fur. Much warmer than sheep’s wool. Still she doesn’t look happy trying to stay warm :(

Me and her are tougher than the other people working at my work though . All they do is complain all day and try to stay inside wth their hands in their pockets.

Me and Stevie are always outside though hehe even eat lunch outside. My hands are raw though splitting and cracking everywhere. I’ve never worn gloves in my 12 years doing this kinda of work. When you guys see pictures of my hands holding a mod you must think I’m homeless haha
 

Users who are viewing this thread