Punk In Drublic

Vaping Master
ECF Veteran
Aug 28, 2018
4,194
17,518
Toronto, ON
Interesting. Thanks for the idea. :)

It’s not guaranteed but worth a try.

Bought a high end snowboard many years ago. Arbor for those who know a thing or 2 about snowboards. First run on it, launched off a mogul and landed on a rock – cracked the board beyond repair. Spent the remaining of the trip drowning my sorrows at the chalet bar. Totally my fault. Contacted Arbor to see if they offered any kind of crash replacement, some companies do. They said I was out of luck. Contacted my credit card company, they asked a few simple questions and gave me a full refund. I ended up buying a cheaper board and used the remaining to pay off my bar tab!

Whats funny - few years later I was in the same store helping a friend with some snowboard purchases. Another customer was buying an Arbor board and the store clerk proceeded to tell a story about some guy who broke his on the first run! I laughed and confessed it was me he was talking about.
 

Tralfaz

Vaping Master
ECF Veteran
Verified Member
Sep 12, 2012
3,450
32,174
Orbit City
thanks folks.
nothing sinister apparently found but not a procedure that i would like repeated any time soon. quite the oddest sensation.
i did proudly report that i haven't been a smoker for 887 days.
If you start to enjoy them, that's when you worry.
 
  • Agree
Reactions: lupinehorror

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
@lupinehorror ......It's all in the tube thickness :D

@NolaMel lol I've just looked out my Freemax disposable tanks and they are the gems. Anyway they are excellent. I got send a selection along with their tube mod for a review a while ago.... Anyway I recommend for your boys :D
 

AngeNZ

ShutterBug
Supporting Member
ECF Veteran
  • Mar 24, 2018
    11,524
    89,691
    New Zealand
    Morning shinies ;)


    In from Eightvape yesterday, the Tarot Baby. I bought the kit mainly for the NRG SE tank but this mod has blown me away. This little squeezer with the Omni V4 board can even do voltage curves! Everything from the 2.4 ohm Vision Nova to the .18 ohm Wotofo Flow Pro fire smoothly and immediately. The buck circuit is very close to the ProVari or DNA for smooth low power, a very rare trait in an inexpensive mod. While the chrome could become a fingerprint magnet, the entire mod hides inside my hand, so who will see them?:D

    Infatuation has occurred. I wish I bought two while they had chrome, built in battery and all. Even though it's not for the long term, it's going to be a fun year or so!
    Vaporesso-Tarot-Baby-TFT-Box-Mod-2500mah-vape.market-7.jpg
    I've got this mod, and their Luxe Nano 80w. Absolutely love the fire bar in the Tarot baby and the size of the mods. TC in the Omni 4 chip is amazing, along with the almost instant firing - Vaporesso REALLY need to bring out an external single 18650 battery mod with this chip :thumb:

    Made some cat collars/accessories for the shelter cats Christmas pictures. It was hard work because since the stroke my fingers are not good at nimble fingered work.



    View attachment 857239

    You still create lil masterpieces :wub:
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,071
    85,478
    Burbank CAlifornia
    Morning shinies ;)



    I've got this mod, and their Luxe Nano 80w. Absolutely love the fire bar in the Tarot baby and the size of the mods. TC in the Omni 4 chip is amazing, along with the almost instant firing - Vaporesso REALLY need to bring out an external single 18650 battery mod with this chip :thumb:



    You still create lil masterpieces :wub:
    aww..thanks
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,071
    85,478
    Burbank CAlifornia

    Blitzdonlife

    Ultra Member
    ECF Veteran
    Apr 24, 2012
    2,370
    14,928
    Central Texas
    Caught the same rabbit that was in the trap with fluffy yesterday haha she must want to come home :( I wish I could take them all
    View attachment 857389
    Ricky Vapes, bunny whisperer. Coming to a theater near you. :p
    Just kidding, glad someone is looking out for the little rabbits, hope you catch Stevie soon.
     

    NolaMel

    ECF Guru
    ECF Veteran
    Verified Member
    Nov 17, 2012
    12,815
    80,994
    New Orleans
    @lupinehorror ......It's all in the tube thickness :D

    @NolaMel lol I've just looked out my Freemax disposable tanks and they are the gems. Anyway they are excellent. I got send a selection along with their tube mod for a review a while ago.... Anyway I recommend for your boys :D
    Great! Cause they’re less than $8 for 2 at MFS. Perfect solution :)
     

    muth

    Ultra Member
    ECF Veteran
    May 20, 2014
    1,911
    7,845
    Boston, MA, USA
    Good morning Shiny's
    @muth I haven't looked for screen time out, think mine is set for 30s and I'm fine with that. Menu is dead simple and may not have the option. Maybe look into the ehpro firmware update.
    You always have your thinking cap on:thumb: TY
    I give my screens 3 seconds. I'm disciplining my attention span.:laugh:
     

    muth

    Ultra Member
    ECF Veteran
    May 20, 2014
    1,911
    7,845
    Boston, MA, USA
    I'm really enjoying the Van & Del Design Soul S RDA (22mm). They were made in Croatia and all materials are sourced from EU and US factories. Designed, made and finished by V&D Design. The Soul is dual AF and more open than the KRMA AF. The deck is very easy to build on and it can take single or dual builds. The BF pin comes installed by default (a blind pin is included in the spares).
    View attachment 857245
    I've been using it on the Armageddon, VAMP Rig and Luna since last Friday. No issues. For me it's shot up to #1 1/2 or #2 for flavor. It is totally in-your-face awesome. I'm running an AVS 26/30 316L 3ID clapton at 0.4Ω. Better pic...
    View attachment 857251

    View attachment 857247 Nice packaging.

    I bought mine at The Vape Factor. They have the Soul S marked down to $30 (a steal). Originally they were selling for $140-$160. Van & Del Design Van & Del Design - The Soul S RDA
    I like the Soul a lot. In fact I grabbed a second one on Saturday for the stash.

    FT has the Soul. $8.63 Soul S Styled RDA Rebuildable Dripping Atomizer - 304 stainless steel / 22mm diameter at FastTech - Worldwide Free Shipping

    And the Poet. $6.79 SXK Poet Styled RDA Rebuildable Dripping Atomizer - stainless steel / 22mm diameter / w/ BF pin at FastTech - Worldwide Free Shipping

    KingPin at VU has an excellent side-by-side-by-side review of V&D's Soul, Jazz and Poet. The Poet is their latest RDA.
    I have the Poet in my wishlist. I'd love to hear what you think.
     

    Georgia Boy

    Super Member
    ECF Veteran
    Jun 28, 2019
    591
    1,232
    Atlanta Georgia
    My Fed Ex man must be stupid. How am I sometimes to open the door to get this package he has put flat up against the door :-xView attachment 857391
    But you live in California how can you're driver be delivering to Georgia as well :rolleyes: Mine does the exact same thing, whereas UPS and DHL just put it to the side under a plant we have there, come on FedEx it's not difficult!
     

    Susaz

    Vaping Master
    ECF Veteran
    Jun 8, 2009
    4,857
    10,701
    Buenos Aires, Argentina
    That's why I never bought it. The OG was doomed from the the start and nobody used them.... I tried to tell everyone but still the clone price was low.

    The new Boxxer V2 works like a treat and the only problem so far has been been with the glass window on the OG which has proved to be be a bit fragile. Most people are buying unbreakable accessories which solve the problem and I think that now the OG comes with that as an alternative. Otherwise flavour and clouds is the accepted wisdom :) I don't know about the clone but can confidently say that you should go for it with the original.... All hail the Odis designs for getting through the flack received and proving that the product is a winner.
    I'm also looking forward for the KRMA bridge.
     

    Susaz

    Vaping Master
    ECF Veteran
    Jun 8, 2009
    4,857
    10,701
    Buenos Aires, Argentina
    I agree that original ideas and good designs should be rewarded if the OG of a device is available and reasonably priced. (Not clone cheap but not over the top)
    I'm keen to buy a Boxxer V2 as soon as the Xmas madness dies down . Thanks for the heads up about the glass window!
    Picked this one a month ago? Also pick up the Ultem windows. At 10 bucks each they're pricey but well worth it.
    Odis Boxxer V2 RBA x TRVP Edition *New Plastic Clear Lens & TRVP Ultem Now Incl.*
     

    Susaz

    Vaping Master
    ECF Veteran
    Jun 8, 2009
    4,857
    10,701
    Buenos Aires, Argentina
    Fine, it has seen enough use that the paint is wearing off if that tells you anything......
    As long as it works I don't mind the paint. It's happening to the Augvape VX200 too, the paint has chipped a chunk. If you can get nail polish of the same color, give it a light coat.
     

    440BB

    Vaping Master
    ECF Veteran
    Verified Member
    Apr 19, 2011
    9,227
    34,009
    The Motor City
    I've got this mod, and their Luxe Nano 80w. Absolutely love the fire bar in the Tarot baby and the size of the mods. TC in the Omni 4 chip is amazing, along with the almost instant firing - Vaporesso REALLY need to bring out an external single 18650 battery mod with this chip :thumb:
    The Armour Pro is the only one I've found but it's much bigger. Tempted...
     

    Susaz

    Vaping Master
    ECF Veteran
    Jun 8, 2009
    4,857
    10,701
    Buenos Aires, Argentina
    I started buying juice again about a year ago because I was in a rental house and did not want to unpack too much. I cannot seem to get back in the swing of DIY. So I buy..View attachment 857339
    The cheese drawer of my fridge..who the hell needs cheese anyway
    I'm thinking of buying one of those tiny fridges and set it up in the laundry room (that used to be my old kitchen and has plenty of counter space). Should be enough to store liquid and pre mix and mixed bottles.
     

    Users who are viewing this thread