When I first got into building I just bought some basic round wire from TEMCo. They're one of the best out there. No Chinesium wire all USA made. Or go with where @TrollDragon gets his ... linked in your other thread. They're high quality wire too. Or AVS, which I also use and is high quality wire.
Here and they're pretty low cost too...
26g kanthal Kanthal A1 Wire 26 AWG RW0159 - 100 Ft 0.98 oz Series A-1 Resistance
26g 316L Stainless Steel Wire 26 AWG RW0559 - 100 FT 1.09 oz SS 316L Non-Resistance AWG
And just for you...
A tad more graphic but it works. Better???
My 25mm attys sit flush 24mm ones are a tiny bit smaller.I'd go with Skunk, he must have measured
no_ just graphic enough
for a second you trick me into going, ah that's nice, someone's read both and coming to the rescue then BANG! the whole search is for pre-coiled wire!
but perfect timing, as yes, i'm exploring @TrollDragon's site
before i ask about this pardon i gotta say__
what did i say about flaunting gold stuff!?
that is PRETTY!
ehem back to point, and if i may quote myself_ shiners? thoughts?>>
Ooh that’s the copper or brass? I’m starting to want a copper one too now.
I’m gonna guess that one is brass. The copper one looked pink on the website but it looks cool the photo Daniel posted
Oh, I think you know what I think you meant. LOL. Nope not falling for that one. I totally also thought you meant a hot hair roller but women can fake that too, it's called a "perm" and if you are me in the 80s, you do not get one. It was pretty dang dire. I had very, very straight hair and it turned into this horrific half perm snake kind of thing.
The hair lady APOLOGIZED. She took my money, then said, "I am very sorry I did my best." LOL
True.
Anna
This silver unicorn mod is 24 mm which is nice my only single 18650 mech that fits all my rda without overhang. It just has a huge voltage drop and doesn’t hit hard so I hardly use it. Works well with mesh though. I could get a profile rda to put on it . That would look cool. The only mesh I have are my profile unity’s RTAs
I must say Thank you very much to all Shinys for all of the Congratulations on my Kool Kroma-R Win
And I would really love to say a Very Very Big Congrats to @AngeNZ and @bigbob2322 on the Big Win
So tell me Ange and Bob!!
What colour Kroma-R did you guys get? I got the Stainless Steel one
And I would really love to say a Very Very Big Congrats to @AngeNZ and @bigbob2322 on the Big Win
So tell me Ange and Bob!!
What colour Kroma-R did you guys get? I got the Stainless Steel one
Last edited:
I received my <clone> SQuape Seven (22mm single coil) about a week ago with the Hussar v2.
The dual AF goes from a pretty airy 2 x 4mm RDL/DL down to a separate 2 x 1mm airflow setting for a proper tight MTL. Like so in this pic from the SQuape site...
Once you rotate the top cap over to the MTL setting the DL AF is completely closed off. The AF is angled downwards. It has excellent flavor and is easy to build on. Heat is dissipated by an additional PMMA black, or the included clear, top cap that you just press fit on top on the SS top cap. The deck has a black pin installed so the top cap will only move within the AF range. The top cap has two notches inside for the pin.
It has a two piece 510 pin with a tiny blind pin pre-installed in it. I almost lost mine, good thing Dog pointed it out on the floor before Cat got to it.
Remove it and squonk away. I cannot tell if the clone deck is made of ematalised aluminium like the OG. 2Fdeal, in their description, says the deck uses non-conductive components to avoid short circuits. So it is likely YFTK used something similar. YFTK did a real good job with the Seven.
The Seven is very much like the Hussar v2 and BioChip RDA's with a smaller area between the posts for the coil. A 3mm ID clapton is as far as I would go. I have an AVS 26/30 316L 2.5mm ID clapton at 0.4 ohms installed. My coil is slightly raised above the deck notches so the AF is hitting the bottom third of my coil (sweet spot). SQuape recommends resistances in the 0.3 to 1.8 ohm range. Some YT-ers, and other reviewers, have built lower.
I've used it wide open, to a more restricted DL and on the MTL setting. Doesn't matter where I set the AF the Seven offers a great vape. The MTL setting is awesome if you like a tight MTL draw. It works fine on a squonker, no issues. Like the Hussar RDA's it is a very condensed flavorful vape. @AngeNZ the Seven airflow is like the KRMA, Hussar v1 or NarEA (likely CA too). You would like it.
SQuape designed it to be a BF RDA but you can drip with it. You'll just be adding juice every couple pulls, depending.
I got mine from 2Fdeal. YFTK SQ Seven 22mm Style RDA Rebuildable Dripping Atomizer w/BF Pin - Silver
The dual AF goes from a pretty airy 2 x 4mm RDL/DL down to a separate 2 x 1mm airflow setting for a proper tight MTL. Like so in this pic from the SQuape site...
Once you rotate the top cap over to the MTL setting the DL AF is completely closed off. The AF is angled downwards. It has excellent flavor and is easy to build on. Heat is dissipated by an additional PMMA black, or the included clear, top cap that you just press fit on top on the SS top cap. The deck has a black pin installed so the top cap will only move within the AF range. The top cap has two notches inside for the pin.
It has a two piece 510 pin with a tiny blind pin pre-installed in it. I almost lost mine, good thing Dog pointed it out on the floor before Cat got to it.
Remove it and squonk away. I cannot tell if the clone deck is made of ematalised aluminium like the OG. 2Fdeal, in their description, says the deck uses non-conductive components to avoid short circuits. So it is likely YFTK used something similar. YFTK did a real good job with the Seven.The Seven is very much like the Hussar v2 and BioChip RDA's with a smaller area between the posts for the coil. A 3mm ID clapton is as far as I would go. I have an AVS 26/30 316L 2.5mm ID clapton at 0.4 ohms installed. My coil is slightly raised above the deck notches so the AF is hitting the bottom third of my coil (sweet spot). SQuape recommends resistances in the 0.3 to 1.8 ohm range. Some YT-ers, and other reviewers, have built lower.
I've used it wide open, to a more restricted DL and on the MTL setting. Doesn't matter where I set the AF the Seven offers a great vape. The MTL setting is awesome if you like a tight MTL draw. It works fine on a squonker, no issues. Like the Hussar RDA's it is a very condensed flavorful vape. @AngeNZ the Seven airflow is like the KRMA, Hussar v1 or NarEA (likely CA too). You would like it.
SQuape designed it to be a BF RDA but you can drip with it. You'll just be adding juice every couple pulls, depending.
I got mine from 2Fdeal. YFTK SQ Seven 22mm Style RDA Rebuildable Dripping Atomizer w/BF Pin - Silver
The 2540 was a card Reader/Punch. JCL, program code and data were manually punched to cards to be read into the mainframe. Was still using it in the early 80's. At the same time I remember the 4341 being upgraded to a whopping 8MB, at the time that was impressive.
I went with the gunmetal.I must say Thank you very much to all Shinys for all of the Congratulations on my Kool Kroma-R Win
And if I would really love to say a Very Very Big Congrats to @AngeNZ and @bigbob2322 on the Big Win
So tell me Ange and Bob!!
What colour Kroma-R did you guys get? I got the Stainless Steel one
You, a CHEAPSKATE ???....NEVER
You're a vaping aficionado Charles
Come to think of it...who here isn't
That's copper. It looked pinkish when I got it. The more I don't clean it the darker brown it gets. Here is an old copper/brass mod I haven't cleaned for a long time.
Similar threads
- Locked
