Shinyitis Support Group

[Terri McVeety]

I'm one who uses coilers, including the top part to spin the wire. I find them convenient.

I have a CM set, I believe v3. My stock coil is typically 2.5mm ID, though I'll do 2mm or 3 mm depending on the particular application.

I recently picked up some Kuro Koiler sets from ft. Each has a fixed post; I got them in 2, 2.5, and 3mm diameter, in different colors. To me they're even more convenient than the CM set, no futzing around swapping spindles.

.

will they spin flat wire? Just got some and haven’t played with it yet. I was leaning to no....

 

[Don29palms]

.

will they spin flat wire? Just got some and haven’t played with it yet. I was leaning to no....

Yes but you have to be a little more patient and watch it closer so it doesn't overlap.

 

[NolaMel]

I *should* probably tackle this tomorrow, after coffee, when my brain *MAY* be working.... but, help!!??? I put a battery in the Armageddon. Nothing. Tested battery, it’s fully charged. Fire button metal makes contact with the collar when pressed. This battery worked fine in it last week (took it out because I don’t leave it in a mech when not in use). What the fudge am I missing? Got to be something simple .

 

[DeloresRose]

I *should* probably tackle this tomorrow, after coffee, when my brain *MAY* be working.... but, help!!??? I put a battery in the Armageddon. Nothing. Tested battery, it’s fully charged. Fire button metal makes contact with the collar when pressed. This battery worked fine in it last week (took it out because I don’t leave it in a mech when not in use). What the fudge am I missing? Got to be something simple .

Check the rda on a different mod?

 

[gsmit1]

I *should* probably tackle this tomorrow, after coffee, when my brain *MAY* be working.... but, help!!??? I put a battery in the Armageddon. Nothing. Tested battery, it’s fully charged. Fire button metal makes contact with the collar when pressed. This battery worked fine in it last week (took it out because I don’t leave it in a mech when not in use). What the fudge am I missing? Got to be something simple .

This is not a battery you wrapped yourself by any chance is it?

 

[NolaMel]

Check the rda on a different mod?

I left it on the mod with a kleenex under it after I vaped it dry-ish so I could change flavors next use.

This is not a battery you wrapped yourself by any chance is it?

Good guess, given my rewrapping at the hint of a nick. But, this is a new brownie. Would a rewrap make a difference? The same battery was in it last time I used the mod. Pulled it out and put it in a battery case next to it.

 

[Rob B.]

Got some new shiny stuff today. Got a new Revenant at my local shop for $20.00, including the Samsung 40T. Also got a Uwell Evdilo for $50.00, including 2 Samsung 40T's. The Dead Rabbit SQ and the hand made keychain fob came from my friend @icepickmaker84. Thank you so much Nick!

Silver Evdilo picking up desk color.

 

[NolaMel]

This is not a battery you wrapped yourself by any chance is it?

My eyesight isn’t spectacular after dark (yes, I have the lamps on). Is there a off/bypass switch inside like the Pulse mech?

 

[icepickmaker84]

Got some new shiny stuff today. Got a new Revenant at my local shop for $20.00, including the Samsung 40T. Also got a Uwell Evdilo for $50.00, including 2 Samsung 40T's. The Dead Rabbit SQ and the hand made keychain fob came from my friend @icepickmaker84. Thank you so much Nick!

View attachment 867627

Silver Evdilo picking up desk color.
View attachment 867629

The DR Sq looks great on the Revenant and the Evdilo looks pretty awesome too!

 

[NolaMel]

Check the rda on a different mod?

You won tonight’s “wtf did Mel do now” contest
Pulled a tank off another mod and put it on, works fine. I’ll have to check the rda in the morning. It didn’t leave the mod,so maybe I over tightened or something. Well, mystery solved! At least the first one . Thanks for the help, all!!

 

[Skunk!]

Decided to give these a try. Been pretty loyal to Samsung for a long time but I have heard good things.

Don't make fun of my charger...

 

[NolaMel]

Decided to give these a try. Been pretty loyal to Samsung for a long time but I have heard good things.
View attachment 867635 View attachment 867637 Don't make fun of my charger...

It’s charging, isn’t it? That makes it a good charger in the grand scheme of things

 

[Skunk!]

It’s charging, isn’t it? That makes it a good charger in the grand scheme of things

Going on 2 years with this one. I want another nitecore i4. Having 2 slots can be rough as forgetful as I am.

 

[Ricky Vapes]

Freebase nic in either VG or pg - pg is runnier in the cold weather.

Bottle of VG
Bottle of PG
flavour concentrates or one shot concentrates (recipes all in one bottle)
capella super sweet concentrate
Empty bottles with a wide mouth

Some of us measure by weight. Some by volume.

Weight: Need a scale. It must measure down to 0.01g, and doesn't matter how high it goes up to. You either want one with at least a 60second auto-shutoff, or it can be mains operated.

Volume: Need either disposable pipettes or syringes. I measure via a scale, so other ppl are better at what you need for this method.

Have a look at the diy forum here, start a thread if you want to:
DIY E-Liquid

This is an awesome guide:
https://www.e-cigarette-forum.com/attachments/diy-information-pdf.686255/

Thanks I’ll take a photo of that post for later. I’m thinking I’ll hold off a week or two because my house flooded and I’m living out of boxes till it gets painted and new flooring put in.

I Can’t bring a small laboratory to my grandmas little house while we stay there. It’s Just a small suite for senior living but it’s close by and she’s happy to have us stay.

My rabbits will be close by at least

 

[NolaMel]

It’s a happy camper now (as am I!!!)

 

[gsmit1]

Good guess, given my rewrapping at the hint of a nick. But, this is a new brownie. Would a rewrap make a difference?

Well, I've had a couple instances where I overdid the negative end and the wrap kept the battery from making good contact.

 

[DLKnives]

Going on 2 years with this one. I want another nitecore i4. Having 2 slots can be rough as forgetful as I am.

I have the same efest charger but was having problems with a couple of batteries so I just got a Nitecore D4 charger and it let me know that those 2 batterires were no good (ERR). Love this D4!

 

[Skunk!]

I *should* probably tackle this tomorrow, after coffee, when my brain *MAY* be working.... but, help!!??? I put a battery in the Armageddon. Nothing. Tested battery, it’s fully charged. Fire button metal makes contact with the collar when pressed. This battery worked fine in it last week (took it out because I don’t leave it in a mech when not in use). What the fudge am I missing? Got to be something simple .

You have to adjust the 510 pin manually on those.

 

[Skunk!]

It’s a happy camper now (as am I!!!)
View attachment 867641

Niiice!

 

[gsmit1]

Decided to give these a try. Been pretty loyal to Samsung for a long time but I have heard good things.
View attachment 867635 View attachment 867637 Don't make fun of my charger...

Dern fine batteries. You'll be happy.