Good morning shinies
Well hopefully my wire will come this week. Today is the first day of moving back to a normalised existence but there are a lot of unknowns....not sure if the post will start delivering as normal. We shall see.
Good morning Charlie! Good to hear things are starting to return to a semblance of normality over there. I hope it turns out well. Last Friday, the 8th, we started what's called Phase 1 towards normal also. The malls, churches, state parks, and some other things re-opened. To be honest, I'm skeptical of this decision. I know people want to get back to normal, but at the cost of what? A good 50% or more of the people around here aren't wearing masks or gloves already. I am just going to hang back, and see what happens. I don't leave the house except for necessities, and when I do, I take care of as many things in one trip as I can....of course protected with mask and gloves. I still have over a quarter tank of gas in my car from a fill up almost two months ago.
As you know, I am a Realtor, and on top of that, I am a very socially active person. This stay at home stuff goes against my very nature, and I want life to return to normal as much as anyone. But, I also don't want to see things get worse than they already are. I'm hoping for a vaccine to come out soon, and also that people act sensibly with the new freedoms we are being given. One can only hope. Right? Our government is struggling with this, to put it mildly. I'm glad I'm not the one who has to make the decisions to fix this.
How about you Charlie? Is your personal situation getting any better? I would be grief stricken if anything worse happened to you. You've been through so much already. You are someone I look forward to seeing here when I check in. I hope your doctors are being diligent in their treatment getting you back to good health and happiness, and looking forward to your day. You and your family are in my thoughts and prayers daily sir. Take good care Charlie!
Last edited:
I agree let us know your thoughts. Can't wait to try mine yay. Checking the compatible coils I am pretty sure I saw an rba for it @Rob B.
Good morning Aliraonz! Yes, there is an rba for the X.
Not only that, there are also 6 or 7 coils that are compatible for it. Looking very forward to getting this. Looks like a very nice device.
I can't say much now but let's put it this way, you will be smiling. Voopoo sent me a Email asking me to hold the review for a couple more weeks, that's why I am telling you this.Good morning Aliraonz! Yes, there is an rba for the X.
View attachment 884609
Good morning Shiny's
Finally found some jackaroo 0.3 coils stateside at VaporDNA. Ordered a few pks and preordered a few pks at ft since there was a code. Wish I could find a second tank without the mod. Good mod but one is enough.
Finally found some jackaroo 0.3 coils stateside at VaporDNA. Ordered a few pks and preordered a few pks at ft since there was a code. Wish I could find a second tank without the mod. Good mod but one is enough.
Is there a lot of old school mod in your picture,or are these recent mods?My shiny new Zeus Dual I got today, compliments of @Nailz
View attachment 884401
I have a couple of older atty's in the picture, but most of the stuff is from within the last year or so. Some from within the last few months. I guess it depends on what your definition of old school is.
Last edited:
Morning all!
Just curious, is shipping everywhere as slow and muddled as mine still? I haven’t bought and vape stuff in a couple weeks, but I’m waiting 2 weeks for coffee. I guess if that’s my biggest problem I’m golden, lol.
Just curious, is shipping everywhere as slow and muddled as mine still? I haven’t bought and vape stuff in a couple weeks, but I’m waiting 2 weeks for coffee. I guess if that’s my biggest problem I’m golden, lol.
I think it's a mess in a lot of areas. I ordered a replacement cell phone for my Dad and it arrived at the post office in Minnesota ten days ago. It reached my Detroit area distribution center four days ago and hasn't budged since.
I use Bodhi Leaf out of CA for my green coffee beans. I ordered 5lb last Thursday, it shipped Friday, will be delivered tomorrow.
Eagerly awaiting my new Alchemist Carbon X blood splat mech squonker [emoji3] It's a 3d printed mod, Sterling contacts, modmaker 510, the body is made of an ABS and carbon fiber blend.
Eagerly awaiting my new Alchemist Carbon X blood splat mech squonker [emoji3] It's a 3d printed mod, Sterling contacts, modmaker 510, the body is made of an ABS and carbon fiber blend.
Some I'm getting quickly some not so much. Our PO here in town are doing great but the hubs seem to be struggling.
People who have the axial RDA what id coils are you using in single coil? I may have to get something beefier and I'm debating on whether I should buy some thicker Clapton wire or if I should just get some round wire that's thick. I would love anyone's input on what they think would be the best way to go about this when my new little friend arrives.
I've seen it run the gamut. I have orders for flavors that have arrived faster than I've ever seen them arrive and then I have a face mask that took 17 days to come to my house from 4 hours away. I'm not purchasing anything from overseas right now because I'm still waiting on something from the beginning of March
Ah I'm not so bad. There's a lot to be thankful for and the remaining problems will get sorted eventually. It's annoying sometimes that most of the problems are resulting from the treatment rather than the actual illness but long has it been so....c'est le vieGood morning Charlie! Good to hear things are starting to return to a semblance of normality over there. I hope it turns out well. Last Friday, the 8th, we started what's called Phase 1 towards normal also. The malls, churches, state parks, and some other things re-opened. To be honest, I'm skeptical of this decision. I know people want to get back to normal, but at the cost of what? A good 50% or more of the people around here aren't wearing masks or gloves already. I am just going to hang back, and see what happens. I don't leave the house except for necessities, and when I do, I take care of as many things in one trip as I can....of course protected with mask and gloves. I still have over a quarter tank of gas in my car from a fill up almost two months ago.
As you know, I am a Realtor, and on top of that, I am a very socially active person. This stay at home stuff goes against my very nature, and I want life to return to normal as much as anyone. But, I also don't want to see things get worse than they already are. I'm hoping for a vaccine to come out soon, and also that people act sensibly with the new freedoms we are being given. One can only hope. Right? Our government is struggling with this, to put it mildly. I'm glad I'm not the one who has to make the decisions to fix this.
How about you Charlie? Is your personal situation getting any better? I would be grief stricken if anything worse happened to you. You've been through so much already. You are someone I look forward to seeing here when I check in. I hope your doctors are being diligent in their treatment getting you back to good health and happiness, and looking forward to your day. You and your family are in my thoughts and prayers daily sir. Take good care Charlie!
With regard to the covid situation, there is no way that your country is ready to come out of lockdown but I've told myself that politics are banned from my conversations here....so enough said.
Take care mate
Shippings been terrible in France since the beginning of the lockdown. It's like everyone involved are short on staff so everything has been backing up and or moving really slowly.
We received post here today for the first time in eight weeks (they've been on a three day week) and I'm hoping that things will go back to normal. In the main we're all really used to a very efficient postal service....I hope it comes back now our lockdown has been relaxed as the infection rates have improved by 84%. It will be up to the responsibility of all to follow the strict contact/social distancing regs so that we don't just go back to before
I’m using a 3.5 ID in the Clapton of the day, which is usually 28g by whatever, and lately Ni80.
I think the key with this, and any atty, is to use the type of coil you like and only modify it as much as the particular atty needs. I could be wrong, but that’s how I do it.
Personally I don’t like round wire so I’m never happy with it in anything, aside from my BB which is too small to put anything larger in. If you don’t like Clapton, use what you like.
Shipping from China is complete lottery still. 2 parcels from Feb yet to arrive but one I ordered in April took a week.
Coffee? That's serious business Delores. Feeling your pain
Similar threads
- Locked
