Javichu

Account closed on request
ECF Veteran
Mar 8, 2020
3,084
17,829
50
Spain
Well i am officialy done with QP Designs...
Got my second Juggy MR on the 8th and it already is giving me problems,same issue as the last one.
First days ok but then i noticed how the gasket was getting deformed little by little...
The white silicone gasket is bent outwards which means it doesn't seal and i just get a mouthfull of e-liquid and it just doesn't vape properly.

Got in contact...again with the store,their client service is astounding thou,told me they will call me back.
Guy i spoke on the phone recommended me the Reload S rta,anyone got any experience with this atty?

Kinda ...... off,really like the performance of the Juggy MR but the gasket thing is a killer for me.
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Well i am officialy done with QP Designs...
Got my second Juggy MR on the 8th and it already is giving me problems,same issue as the last one.
First days ok but then i noticed how the gasket was getting deformed little by little...
The white silicone gasket is bent outwards which means it doesn't seal and i just get a mouthfull of e-liquid and it just doesn't vape properly.

Got in contact...again with the store,their client service is astounding thou,told me they will call me back.
Guy i spoke on the phone recommended me the Reload S RTA,anyone got any experience with this atty?

Kinda ...... off,really like the performance of the Juggy MR but the gasket thing is a killer for me.
Yes it does sound like a design fault!! Don't know about the reload RTA but the RBA is pretty good so it's not going to be disappointing I wouldn't think.....you know what I'm going to say....get yourself a Dvarw....ft does inserts for them if you're MTL but the DL is slightly restricted DL and the DL FL is more open....most here recommend them and it's about the only atties I use (mostly).
 

Javichu

Account closed on request
ECF Veteran
Mar 8, 2020
3,084
17,829
50
Spain
Yes it does sound like a design fault!! Don't know about the reload RTA but the RBA is pretty good so it's not going to be disappointing I wouldn't think.....you know what I'm going to say....get yourself a Dvarw....ft does inserts for them if you're MTL but the DL is slightly restricted DL and the DL FL is more open....most here recommend them and it's about the only atties I use (mostly).

Yeh i have to get around getting me a Dvarw,hopefully by the end of this month if no other expense ends up screwing me up as usual :lol::lol:

Guy from customer support (very nice fellow) says that most of them are MTL vapers but the ones that aren't gave the Reload S a try and they are loving it,coil placement is a bit ''different'' thou but apart from that he says they use it as their daily atty.

Will wait for them to call me back and see whats up,shame...going to have to vape my ol' Destiny for the weekend which is meh.

UPDATE:

Just got a call like 10 minutes after i talked with the customer service guy,said that no problem that i would get my Reload S delivered on Monday or Tuesday and at the same time they would pick up the Juggy MR.

Hope i like the Reload S,been watching some videos and it does look good,coil placement is kinda odd but i will figure it out.
 
Last edited:

Daniel Forsyth

Vaping Master
Supporting Member
ECF Veteran
  • Mar 26, 2019
    9,438
    57,104
    45
    Victoria, Australia
    Yeh i have to get around getting me a Dvarw,hopefully by the end of this month if no other expense ends up screwing me up as usual :lol::lol:

    Guy from customer support (very nice fellow) says that most of them are MTL vapers but the ones that aren't gave the Reload S a try and they are loving it,coil placement is a bit ''different'' thou but apart from that he says they use it as their daily atty.

    Will wait for them to call me back and see whats up,shame...going to have to vape my ol' Destiny for the weekend which is meh.

    UPDATE:

    Just got a call like 10 minutes after i talked with the customer service guy,said that no problem that i would get my Reload S delivered on Monday or Tuesday and at the same time they would pick up the Juggy MR.

    Hope i like the Reload S,been watching some videos and it does look good,coil placement is kinda odd but i will figure it out.

    It looks like a very nice and very good quality RTA Buddy:thumb: You'll slot a coil in there without any hassles;)
     

    virm

    Ultra Member
    ECF Veteran
  • Oct 27, 2019
    1,735
    10,464
    Yeh i have to get around getting me a Dvarw,hopefully by the end of this month if no other expense ends up screwing me up as usual :lol::lol:

    Guy from customer support (very nice fellow) says that most of them are MTL vapers but the ones that aren't gave the Reload S a try and they are loving it,coil placement is a bit ''different'' thou but apart from that he says they use it as their daily atty.

    Will wait for them to call me back and see whats up,shame...going to have to vape my ol' Destiny for the weekend which is meh.

    UPDATE:

    Just got a call like 10 minutes after i talked with the customer service guy,said that no problem that i would get my Reload S delivered on Monday or Tuesday and at the same time they would pick up the Juggy MR.

    Hope i like the Reload S,been watching some videos and it does look good,coil placement is kinda odd but i will figure it out.

    i got the sxk clone of reload following ms.prof.dr.dr. leititia's advice among others. it tops .blank and even axial often enough. holding back from getting a 2nd. (theres a new unbelievably tasty looking red one on FT too!)

    i do hate the drip tip though, no idea why it's uniqueness is praised by reviewers. i alternate driptips that came with the axial and elevate depending on how the AF is behaving per the coil/whick du jour .

    enjoy!
     

    virm

    Ultra Member
    ECF Veteran
  • Oct 27, 2019
    1,735
    10,464

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Last edited:

    virm

    Ultra Member
    ECF Veteran
  • Oct 27, 2019
    1,735
    10,464

    DeloresRose

    Vaping Master
    ECF Veteran
    Apr 25, 2014
    8,610
    63,106
    toledo ohio
    Yes it does sound like a design fault!! Don't know about the reload RTA but the RBA is pretty good so it's not going to be disappointing I wouldn't think.....you know what I'm going to say....get yourself a Dvarw....ft does inserts for them if you're MTL but the DL is slightly restricted DL and the DL FL is more open....most here recommend them and it's about the only atties I use (mostly).


    Where did you get the Dvarw fl? I found a clone on FT, cheap so I’ll snag it. I’m not impressed with the air on the dl at all. I like it otherwise.
     

    DeloresRose

    Vaping Master
    ECF Veteran
    Apr 25, 2014
    8,610
    63,106
    toledo ohio
    Yeh i have to get around getting me a Dvarw,hopefully by the end of this month if no other expense ends up screwing me up as usual :lol::lol:

    Guy from customer support (very nice fellow) says that most of them are MTL vapers but the ones that aren't gave the Reload S a try and they are loving it,coil placement is a bit ''different'' thou but apart from that he says they use it as their daily atty.

    Will wait for them to call me back and see whats up,shame...going to have to vape my ol' Destiny for the weekend which is meh.

    UPDATE:

    Just got a call like 10 minutes after i talked with the customer service guy,said that no problem that i would get my Reload S delivered on Monday or Tuesday and at the same time they would pick up the Juggy MR.

    Hope i like the Reload S,been watching some videos and it does look good,coil placement is kinda odd but i will figure it out.
    I feel for you, all the issues you’ve been having. I wish shipping weren’t so expensive, I have a lot of atties I’d PIF you
     

    pt91

    Super Member
    ECF Veteran
    Verified Member
    Sep 26, 2009
    901
    2,073
    AR
    Well i am officialy done with QP Designs...
    Got my second Juggy MR on the 8th and it already is giving me problems,same issue as the last one.
    First days ok but then i noticed how the gasket was getting deformed little by little...
    The white silicone gasket is bent outwards which means it doesn't seal and i just get a mouthfull of e-liquid and it just doesn't vape properly.

    Got in contact...again with the store,their client service is astounding thou,told me they will call me back.
    Guy i spoke on the phone recommended me the Reload S RTA,anyone got any experience with this atty?

    Kinda ...... off,really like the performance of the Juggy MR but the gasket thing is a killer for me.
    That is very disappointing. I am running two and keep an eye out for any gasket issue but none so far. I am baffled by this issue.
    I noticed the FT close of the mini is back in stock.
    $16.50 JuggerKnot Mini Styled RTA Rebuildable Tank Atomizer - 3/5ml / 304 stainless steel + glass / 24mm diameter at FastTech - Free Shipping
    I have one and the flavor is great. It just doesn't hold as much liquid and is sort of a pain to fill. Doesn't hv that round gasket like the MR.
    My other favorite the Augvape single coil Intake RTA is just really hard to find these days. No issues with it and I have used them for a long time.
     
    Last edited:

    Users who are viewing this thread