so i'm replacing and restocking the Akkus ja wohl and inviting inpults for the list.
Because this tit-hat 'friend' of mine decided to punk me with a 'gift' i'm getting mostly 18650s even for my singles.
All-in-all, thinking 7 18650 and 1 21700. here's the list:
4 X Moli 2600mAh - 35A - 2 pairs for the dual reg- replacing aging VTC5A's
1 X Moli 2600mAh - 35A for single use (2 if i don't order the Samsung or 2 VTCA's)
1 x VTC5A - for single use - replacing same (2 if i don't order the Samsung or 2 Moli's)
1 x Samsung 20s - single use (just curious as ive never tried it, but if someone says too short life then it's i'll double up on of the other two 18650s)
1 x 21700 to backup my current 3 which are doin airtight, either: another Moli P42A OR another Samsung 40T OR a Samsung 30T (curiousity, never tried) OR Moli 35A (curiousity, never tried AND not Mooch-listed)
Because this tit-hat 'friend' of mine decided to punk me with a 'gift' i'm getting mostly 18650s even for my singles.
All-in-all, thinking 7 18650 and 1 21700. here's the list:
4 X Moli 2600mAh - 35A - 2 pairs for the dual reg- replacing aging VTC5A's
1 X Moli 2600mAh - 35A for single use (2 if i don't order the Samsung or 2 VTCA's)
1 x VTC5A - for single use - replacing same (2 if i don't order the Samsung or 2 Moli's)
1 x Samsung 20s - single use (just curious as ive never tried it, but if someone says too short life then it's i'll double up on of the other two 18650s)
1 x 21700 to backup my current 3 which are doin airtight, either: another Moli P42A OR another Samsung 40T OR a Samsung 30T (curiousity, never tried) OR Moli 35A (curiousity, never tried AND not Mooch-listed)
So the delivery guy from Nacex just delivered my Reload S and picked up the faulty Juggy MR.
Cleaned the atty well,put the coil and wicked it and meh...guess it's ok but there was something about the Juggy MR that i miss.
Don't get me wrong flavor of the Reload S is pretty good but it didn't hit the sweetspot like my Juggy MR did, what shame,i mean you find the perfect atty for you but it has problems,what a bummer.
Someone gave me a fasttech link for the JuggerKnot Mini Styled rta,will probably order that at the end of the month.
Hopefully it will vape close to how the Juggy MR felt for me,deck really looks alike so i am hoping it be similar.
Cleaned the atty well,put the coil and wicked it and meh...guess it's ok but there was something about the Juggy MR that i miss.
Don't get me wrong flavor of the Reload S is pretty good but it didn't hit the sweetspot like my Juggy MR did, what shame,i mean you find the perfect atty for you but it has problems,what a bummer.
Someone gave me a fasttech link for the JuggerKnot Mini Styled rta,will probably order that at the end of the month.
Hopefully it will vape close to how the Juggy MR felt for me,deck really looks alike so i am hoping it be similar.
it'll perform differently with diff coils, coil-positions, amounts of wick, wattage, AF... it's her first round! might find yyour j-spot yet
Don't make it you're firing finger. That's all I'll say otherwise I'll feel all responsible
Anyone here got/use a Reload S RTA?
Thinking that the 2.5mm coils i am using might be a tad small,the 2.5mm coil was one i have left from a previous atty,might go tomorrow to the shop and get a 3mm coil,those are the ones i normally use.
Thinking that the 2.5mm coils i am using might be a tad small,the 2.5mm coil was one i have left from a previous atty,might go tomorrow to the shop and get a 3mm coil,those are the ones i normally use.
@Letitia has the OG, maaaybe if you're lucky she has built it by now
now have faith, I don't think she's that lazyoh_ on the rda i never go smaller than 3. i usually do 3.5
@Letitia has the OG, maaaybe if you're lucky she has built it by now
When it comes to coils i am kinda weird,gotta admit it.
Got use to using 3mm on my RTA's but wattage wise i don't really go that high,30 to 36 watts is my sweet point.
Ohm wise depends on the coils,mostly between 0.20 and 0.30,ones i have at the moment are at 0.27.
Flavor they are good but i don't know...something feels off'ish,called my friend from the vape shop told him to find me something in 3mm,will have to make do with these that i have one at the moment.
P.S: I miss my Juggy MR...damn gasket problem,i loved that atty.
Looks like a good list to me. The Samsung 20S is the one I use for single battery mechs with builds below 0.2 Ohms. It does only have a 2000mAh capacity but nice and safe for low builds at 30A CDR. Good to have one up your sleeve.
You've probably already read this:
Bench Test Results: Samsung 20S 18650...hardest hitting 18650 right now, beats HB6 and VTC6A
And you can't go wrong with Molicel 2600mAh (Mooch rates them at closer to 25A CDR) and the VTC5A.
And I'm pretty sure you've read this too:
Bench Retest Results: Molicel P26A 2600mAh 18650...beats VTC5A, best all-around 18650
Did you try contacting QP Designs about your Juggerknot MR gasket problem? Maybe they'll have some advice.
Contact Us
guysieweesies?
i've forgot_ where did we still on an N80 6*30g+40g; did someone say it'd be too slow to heat or something?
i've forgot_ where did we still on an N80 6*30g+40g; did someone say it'd be too slow to heat or something?
$5.35 Demon Killer Kanthal A1 Alien Heating Wire for RBA Atomizers - 32 AWG / 0.2mm dia. / 0.3mm*0.8mm flat / 5m/roll at FastTech - Free Shipping
$3.74 Coil Father Heating Wire Coiling Jig Winder - 2.5mm + 3mm + 3.5mm + 4mm coil jig heads at FastTech - Free Shipping
Takes me about 2 minutes to build a 2.5, 3 or 3.5 coil. Very easy and much cheaper than prebuilt plus I can make sure the direction of the coil fits the atty. The flat wire listed is my favorite by far. Easy to clean and dry burn. About 5 wraps is around .5 to .6 so you won't need high wattage. Most of mine are 36-40 watts.
The QP mini clone has great flavor. Same or better than the MR IMO. Just doesn't hold as much liquid.
Oh that's Mark Todd's new BB bridge. Looks interesting.No sorry.....first I've heard of it and am a bit behind on my new bridges as am happily far down the rabbit hole as it is. Have been looking at this one in the last few weeks....
View attachment 942031
From MT essentials
BTW Charlie I just got an email reply from Sourcemore. They say the Boxx might be in "next Monday". Fingers crossed.
thanks_ btw i'm pretty sure you're pretty sure that i'm pretty sure that saying pretty sure is pretty sure to get me to tell you you're pretty sure a judgy bi'atch when you're dollin' out wisdom aren't you
Similar threads
- Locked
