Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,863
136,918
West Frankfort, IL
the bigger the stuff the easier to wind.

but seriously, with a single coiler like reload a small coil won't be great unless maybe you go all Angie with AF/driptip

oh plus i do remember leg length is importantish for this one> @Letitia what was the better spot for you? i think i have mine at 5.5 now
My leg length for the jk minis is 4mm. Haven't built the reload s. For the reload s deck there isn't a need to measure legs anyway. Just install and snip similar to a velocity deck. Have to admit I do miss the pure simplicity of velocity decks.
 

Letitia

Citrus Junkie
Supporting Member
ECF Veteran
Apr 2, 2017
25,863
136,918
West Frankfort, IL
tween reviews and list confused .. are there two singlecoil decks or just the one nice big one?

is there an SBS big enough to carry it?
3 separate decks included. I have no idea about sbs compatibility.
 

Javichu

Account closed on request
ECF Veteran
Mar 8, 2020
3,084
17,829
50
Spain
You really should contact qp. I ordered direct, have had the same 2 mr is rotation since I got them with zero issues. My gaskets haven't shown any signs of deformity.

Just sent them an email like half an hour ago.

Basically it was just to inform them of my disappointment in their product.
Sent them all the pertinant info,receipts,pics of the gasketcs when deformed,well written wall of text with all pertinant info,etc,etc.

Just did it so they knew i was a real customer and not just a troll or hater.

At this point won't be getting any more of them products,might get a clone from fasttech but yeah 2 attys in row with the same problem? not good...hey maybe it wasn't meant to be and i was just plain unlucky.
 

charlie1465

ECF Guru
ECF Veteran
Dec 30, 2014
10,789
72,866
Roquebrune sur Argens, Var, France
Just sent them an email like half an hour ago.

Basically it was just to inform them of my disappointment in their product.
Sent them all the pertinant info,receipts,pics of the gasketcs when deformed,well written wall of text with all pertinant info,etc,etc.

Just did it so they knew i was a real customer and not just a troll or hater.

At this point won't be getting any more of them products,might get a clone from fasttech but yeah 2 attys in row with the same problem? not good...hey maybe it wasn't meant to be and i was just plain unlucky.
Good that you've written....I bet they'll send you another one!!

Re the SBS mod that fits that atty....not entirely sure but I doubt it :)
 

stabwood is good

Super Member
ECF Veteran
Oct 17, 2020
510
3,122
@stabwood is good - have you vaped the Cabeo clone yet? What are you thinking so far?

Yes I have, and it’s meh. It’s finicky. I first had a 3 mm id coil with six wraps installed. Thinned out the cotton, placed the ends in the wells. But that was too much cotton. I quickly had dry hits. Pulled that coil out, put a 2.5 mm id coil with five wraps, thinned out the cotton (which I don’t always do) and it did improve things - somewhat. But I still got dry hits at about the fourth pull. I rewatched Todd and Jim Vv’s review videos again because they both were raving about it. I noticed they both vaped holding their mod horizontal while I hold mine about twenty degrees. So I tried it holding my setup horizontal. And lo and behold, no dry hits. But then is it really juicing the wick by capillary action? Or is juice just leaking into the wells? But the biggest problem - muted flavor! I was a little suspicious even before ordering this because, watching the videos, I didn’t really see anything innovative about the airflow position. But again, both Todd and Jim raved about the flavor. Actually, I watched reviews from four YT reviewers and they all said flavor was great. I would say, for the money - because for a clone, it’s not cheap - get the GT4 or two DVARWs. I wish someone on here reviewed it before me. Haha. I waited almost two months for it. Two months for a meh tank. Get the GT4 or DVARWs.
 

Rathamar

Super Member
ECF Veteran
Verified Member
Sep 15, 2013
719
1,866
Mound - Minnesota, USA
So the Shinyitis bit and I had to order a Requiem Mod from Fasttech. After the MAP coupon it was low enough that I was good with gambling that much (I know the shipping ban isn't in place yet, but who knows when a FT package will get here :)).

I hope this is it (it wont be). But I justify it to myself as I "needed" a Mech BF Mod that will last forever and I could repair via a visit to the local hardware store. All the other ones are plastic or have weird parts etc........

At least that is what I am telling myself.
 

virm

Ultra Member
ECF Veteran
  • Oct 27, 2019
    1,735
    10,464
    You would be wrong in your thinking. My "oh I have to use my new stuff right now" eagerness has long passed. Problem is I'm very happy with my current go tos and buy new stuff more out of habit than actual want/need.:rolleyes:

    speaking of, where is @Fidola13 ?? havent seen her since i been back.
     

    Letitia

    Citrus Junkie
    Supporting Member
    ECF Veteran
    Apr 2, 2017
    25,863
    136,918
    West Frankfort, IL
    You can get cheap body part on SourceMore? Is there a tab at the top that I'm not seeing?

    Asking for a friend. >.>
    You'll need to create an account if you don't have one already. Once you've created an account you will always get a discount price after logging in. Be aware sourcemore doesn't keep you logged in so you have to log in every visit.
     

    charlie1465

    ECF Guru
    ECF Veteran
    Dec 30, 2014
    10,789
    72,866
    Roquebrune sur Argens, Var, France
    Yes I have, and it’s meh. It’s finicky. I first had a 3 mm id coil with six wraps installed. Thinned out the cotton, placed the ends in the wells. But that was too much cotton. I quickly had dry hits. Pulled that coil out, put a 2.5 mm id coil with five wraps, thinned out the cotton (which I don’t always do) and it did improve things - somewhat. But I still got dry hits at about the fourth pull. I rewatched Todd and Jim Vv’s review videos again because they both were raving about it. I noticed they both vaped holding their mod horizontal while I hold mine about twenty degrees. So I tried it holding my setup horizontal. And lo and behold, no dry hits. But then is it really juicing the wick by capillary action? Or is juice just leaking into the wells? But the biggest problem - muted flavor! I was a little suspicious even before ordering this because, watching the videos, I didn’t really see anything innovative about the airflow position. But again, both Todd and Jim raved about the flavor. Actually, I watched reviews from four YT reviewers and they all said flavor was great. I would say, for the money - because for a clone, it’s not cheap - get the GT4 or two DVARWs. I wish someone on here reviewed it before me. Haha. I waited almost two months for it. Two months for a meh tank. Get the GT4 or DVARWs.
    I did mention it earlier...I asked Rob Fisher and he said that he preferred the Dvarw...that was enough for me.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,363
    88,361
    New Zealand

    Z-Lee

    Vaping Master
    ECF Veteran
  • Apr 17, 2021
    3,213
    9,706
    Upper Midwest
    You'll need to create an account if you don't have one already. Once you've created an account you will always get a discount price after logging in. Be aware sourcemore doesn't keep you logged in so you have to log in every visit.
    Are you telling me I can get even cheaper body parts? O.O
     

    Z-Lee

    Vaping Master
    ECF Veteran
  • Apr 17, 2021
    3,213
    9,706
    Upper Midwest
    Morning shinies ;)

    Aegis Boost Plus is at the PO already, waiting for me :D





    $40 price was for the Plus, and the RDTA pod deck, which is cheap for NZ sites. At Health Cabin, that would've been $48 shipped. Thank you for looking though :thumbs:
    Ahhh, okay. Yeah, I do remember the RDTA converter for the Pro was like $15. The 510 was only like $3 though iirc and should work on both the Plus and the Pro.
     

    Z-Lee

    Vaping Master
    ECF Veteran
  • Apr 17, 2021
    3,213
    9,706
    Upper Midwest
    You'll need to create an account if you don't have one already. Once you've created an account you will always get a discount price after logging in. Be aware sourcemore doesn't keep you logged in so you have to log in every visit.
    That makes sense now though. I remember when I first ordered from them, the prices I had seen before they were in the cart were higher than when I was checking out. In my head I was thinking that they were discounting more, with the more stuff I bought because I kept adding stuff to the cart before I paid for it all.

    A login discount makes more sense, lol.

    Maybe it would have been better for me to see higher prices now that I think about it. >.>
     

    stabwood is good

    Super Member
    ECF Veteran
    Oct 17, 2020
    510
    3,122
    Morning shinies ;)

    Aegis Boost Plus is at the PO already, waiting for me :D





    $40 price was for the Plus, and the RDTA pod deck, which is cheap for NZ sites. At Health Cabin, that would've been $48 shipped. Thank you for looking though :thumbs:

    $40 is a good price for both. Vapin Art, in my State of Florida, had the Boost Plus for $20 (and still does). And then had a 30% off code. This was right before the mail ban so I think he was trying to get rid of stock. I bought three of them. I got the RDTA from FT for $16. And some 510 adapters too. The 510 adapters are cool because you can then use all your single coil tanks. :thumb:
     

    Z-Lee

    Vaping Master
    ECF Veteran
  • Apr 17, 2021
    3,213
    9,706
    Upper Midwest
    So the Shinyitis bit and I had to order a Requiem Mod from Fasttech. After the MAP coupon it was low enough that I was good with gambling that much (I know the shipping ban isn't in place yet, but who knows when a FT package will get here :)).

    I hope this is it (it wont be). But I justify it to myself as I "needed" a Mech BF Mod that will last forever and I could repair via a visit to the local hardware store. All the other ones are plastic or have weird parts etc........

    At least that is what I am telling myself.
    If it isn't too late to cancel, you can get them from SourceMore right now for almost half the price. You'll also receive them likely a week or two quicker than FT. Here's the link if you're interested - need to create an account to see the reduced price though (courtesy of Letitia):

    $32.62
    Vandy Vape Requiem BF Kit 18650 6ml Mod Kit

    Never mind, FT+MAP code puts it at $41.46. So unless you plan on loading up a cart, they're probably going to end up about the same.
     

    Daniel Forsyth

    Vaping Master
    ECF Veteran
  • Mar 26, 2019
    9,443
    57,136
    45
    Victoria, Australia
    Good golly, that Ragnar is hot! 35mm though... where the heck would I park it?

    I won one with my custom mod in my lucky waffle win but I ended up giving it away.
    There's a few places I could put that sucker but I just couldn't get my bloody face around it to vape on:confused:
     

    Users who are viewing this thread