FranC

Long time vaper.
Supporting Member
ECF Veteran
Verified Member
  • Oct 1, 2010
    195,501
    645,889
    New Hampshire
    Brunhilde MTL pros, I need some help. I'm using the coil that came with the atty and the 2.5mm air flow insert. And no matter what I do, I get a wet, clogged vape, with a kind of deep, unpleasant gurgle. I've tried both cotton and rayon. I've thinned tails and left them untouched. I've set the wattage from 11 to 18 (unheard of for me). Nothing seems to help. What should I do?

    Note: I can get only one of the steel rods to stay up, so I've left them both flush.
    Don’t worry about the rods. Mine fall right through. I didn’t use the included coils.
     

    ShowMeTwice

    Supporting Member
    ECF Veteran
    Jun 28, 2016
    18,907
    1
    125,628
    the Universe • ∞
    Mmmm..seems I don't have a 'buy again' option.
    View attachment 959771
    Use a computer, with a real Big Boy screen, and you will see the "Buy Again" option.

    Or try rotating your phone from portrait mode to landscape mode. Might see it then. I doubt HC would have different screen layouts on their webpages for users.

    Only difference is you are using your phone and I am using my Mac. I loves me some Big Screen Real Estate compared to my teeny weeny iPhone screen. :D
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    I prefer SbS mods with deeper drops, so sometimes the heatsinks are a must-have addition (for me), such as the one on the left. I've got a bunch too, both colors and sizes. They come in handy.

    I'm glad you liked the idea!

    View attachment 959769
    I want your SBS collection. PM me your home address and I'll drop by for a cup of tea. If you leave the room at any point I promise I won't put them in my bag and run out the door.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,351
    88,266
    New Zealand
    I want your SBS collection. PM me your home address and I'll drop by for a cup of tea. If you leave the room at any point I promise I won't put them in my bag and run out the door.

    I'm calling dibs!

    Because I knew @DPLongo22 before you did. Plus along with his darling Kat, we have an old Doggystyle club membership.

    Beat that :p






    Or we can split the proceeds....
     
    • Winner
    Reactions: Katdarling

    ShowMeTwice

    Supporting Member
    ECF Veteran
    Jun 28, 2016
    18,907
    1
    125,628
    the Universe • ∞
    Brunhilde MTL pros, I need some help. I'm using the coil that came with the atty and the 2.5mm air flow insert. And no matter what I do, I get a wet, clogged vape, with a kind of deep, unpleasant gurgle. I've tried both cotton and rayon. I've thinned tails and left them untouched. I've set the wattage from 11 to 18 (unheard of for me). Nothing seems to help. What should I do?

    Note: I can get only one of the steel rods to stay up, so I've left them both flush.
    Ma chère madame Zazie, please see Monsieur @Daniel Forsyth's following post:

    Shinyitis Support Group

    Might help ya.
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    Some more Vape Mail from last week.

    The Dovpo Blotto is a really nice atomizer however I hate the tiny little flat head grub nuts. Had a hell of a time getting them to turn without stripping them.

    Which flavor of grub nuts do you prefer? I guess I like the hexagonal or whatever they’re called the most.

    The entire atty is built nicely. The air flow even wide open is a bit too restrictive than I normally like. But I think with the right juice and flavor tones it will shine. I’m using a lemonade juice that I’m not crazy about. So I’ll try some other darker flavor.

    The Geekvape Aegis Solo S100 is too cute. I think I mentioned that when I 1st got it. Wish it could hold a 21700 but it is what it is and it’s fine as is. It came with 2 extra bubble tanks - an ultem and clear glass one that holds 5 ml of juice. It came with a straight clear glass installed.

    That’s it. Enjoy your vaping evening :wub: !!
    DD98EEFA-CB70-446C-894F-0D0985227F12.jpeg
     

    DPLongo22

    "Vert De Ferk"
    ECF Veteran
    Verified Member
    Dec 17, 2011
    32,962
    182,720
    Midworld
    I want your SBS collection. PM me your home address and I'll drop by for a cup of tea. If you leave the room at any point I promise I won't put them in my bag and run out the door.

    I'm calling dibs!

    Because I knew @DPLongo22 before you did. Plus along with his darling Kat, we have an old Doggystyle club membership.

    Beat that :p

    Or we can split the proceeds....

    Nah - mine's nothing (seriously). There are folks on FB that have hundreds of times more than I've got. I have just a few, and not even the "HOT!" ones. I'm just a simple man (thank you, Lynyrd Skynyrd).

    Now - Dawgies, we've got. Oh mammamia have we got dawgs! Not quite as many as drip tips, but still PLENTY. For good reason too. :D
     

    DPLongo22

    "Vert De Ferk"
    ECF Veteran
    Verified Member
    Dec 17, 2011
    32,962
    182,720
    Midworld
    Where do you find the heat sinks? I don't think I've ever seen them advertised.

    Most of mine date back some years. I think I got some of them from FT, but some better quality ones from FatDaddy (maybe?).

    I'll see if I still have receipts, but I'm thinking that I got most of them back in '14 or '15. FastTech used to have a lot of them, but I haven't shopped them in quite some time.
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    That's what I'm waiting to see, Hurry Up:w00t:

    I don’t want to takeover the thread with all my shiny new toys but I will mention this. I had ordered a stabwood from the UK store. I had about ten mods in my cart trying to decide which I liked the most well then I ordered the wrong one. :w00t: !!!!

    I was really bummed but I shot Phil the sales manager there and told him my tale of woe. :p

    Within 24 hours the mod that I had meant to purchase was being shipped off to me even BEFORE I had shipped the one I had in my possession.

    And NO restocking fee or penalties. I only had to pay for shipping which was abt $27. Considering I didn’t pay for shipping to begin with it was a wash!

    Awesome customer service. He was responding to my evening emails where it must’ve been past midnight in Britain. So kudos for great customer service by Phil at StabwoodModsUK!!
     

    DPLongo22

    "Vert De Ferk"
    ECF Veteran
    Verified Member
    Dec 17, 2011
    32,962
    182,720
    Midworld
    Nah - mine's nothing (seriously). There are folks on FB that have hundreds of times more than I've got. I have just a few, and not even the "HOT!" ones. I'm just a simple man (thank you, Lynyrd Skynyrd).

    Now - Dawgies, we've got. Oh mammamia have we got dawgs! Not quite as many as drip tips, but still PLENTY. For good reason too. :D

    Pursuant to the point, and coincidentally recent, I finally found my sweet spot (lol). Took me long enough.

    listing side by side mods
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    20's to early but they did have some good movies in the 50's and 60's,personally one of my favorites is Roman Holiday WITH Gregory Peck and Audrey Hepburn,always watch it with my pops when its on the tv.

    Still you have your work cut out for you Fids,can't forgive the fact that you never watched the original trilogy...

    LONG LIVE STAR WARS!!

    I’m a lover of the Golden Age when talkies started to be made through the mid 40s. That’s my sweet spot with classic movies.

    There are some great ones especially the Roman Holiday! I could never get enough of Audrey Hepburn and Gregory Peck. Such a good feeling movie!!
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,351
    88,266
    New Zealand
    I don’t want to takeover the thread with all my shiny new toys but I will mention this. I had ordered a stabwood from the UK store. I had about ten mods in my cart trying to decide which I liked the most well then I ordered the wrong one. :w00t: !!!!

    I was really bummed but I shot Phil the sales manager there and told him my tale of woe. :p

    Within 24 hours the mod that I had meant to purchase was being shipped off to me even BEFORE I had shipped the one I had in my possession.

    And NO restocking fee or penalties. I only had to pay for shipping which was abt $27. Considering I didn’t pay for shipping to begin with it was a wash!

    Awesome customer service. He was responding to my evening emails where it must’ve been past midnight in Britain. So kudos for great customer service by Phil at StabwoodModsUK!!

    That is fantastic service :thumbs:
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    I prefer SbS mods with deeper drops, so sometimes the heatsinks are a must-have addition (for me), such as the one on the left. I've got a bunch too, both colors and sizes. They come in handy.

    I'm glad you liked the idea!

    View attachment 959769

    It’s definitely a great idea and I have several in different sizes and colors. I just need to find them lol! Sounds like my project tomorrow as I watch football!’
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    I prefer SbS mods with deeper drops, so sometimes the heatsinks are a must-have addition (for me), such as the one on the left. I've got a bunch too, both colors and sizes. They come in handy.

    I'm glad you liked the idea!

    View attachment 959769

    I’d love to have a Dani! Are they “worth” the high price. I don’t know enough about them or high end mods to know.

    I really only know a bit about stabwood mods. I’m always learning though especially from @Daniel Forsyth it makes for an interesting hobby which is how I justify my $$$$$$$ spent in the past 4 years lol!!!
     

    Fidola13

    Totally Stashed!
    Supporting Member
    ECF Veteran
    Verified Member
    Dec 20, 2017
    10,223
    57,008
    Boston
    I was trying to figure out what could get you more excited, than @Fidola13's good wood yesterday. Then I remembered what else she ordered :lol:

    Mystery solved!!!!!

    yeah I think if either Dan or I are excited about something more than likely it’ll be stabwood mods!!
     

    Users who are viewing this thread