Shinyitis Support Group

[Fidola13]

I came within a moment of a couple shiny mod orders this week, an Arctic Dolphin Adonis stabwood and a Dovpo Riva dna 250c. Not necessities but both very shiny to me, but the need to replace my Dad's generator popped up and the hoard is pretty large, so I passed. Both good deals from US vendors and I regret it a bit now that shipping is going to skyrocket, if available.

Awww that stinks. Beautiful of you to help your dad instead of buying something you REALLY like.

If in the future you’re able to purchase any of these items then don’t forget to post them on the Stabwood Show thread!!

as a matter of fact can you take a photo of the stabwood and post it. You’ll see that a lot of Shinys That would help a lot. I haven’t seen many Arctic mods. I know stabwood mods UK had a few Arctic mods.

and since you’re unable to buy them can you say what US vendor your referring to. I wont buy things from the US stores because they add on the state’s vaping taxes which in my case is 75%!!!!!! Plus add on the shipping cost, ID Fee, and signature at time of delivery.

Truthfully- the whole thing stinks.

 

[Fidola13]

When I was twelve, my family was living in a damp house in England, and moths were everywhere. They'd get behind the lenses of my glasses and flutter against my eyelids. Sometimes, when I lay my head on my pillow at night, a bunch of them would erupt from it. And thus a horror of moths was born. I got over it, but it was pretty potent for a few years.

Nvm

 

[Fidola13]

I'm in, but ONLY Whittaker's chocolate for me plz.

Chocolate as well. If chocolate is involved we need to know. Just to

 

[charlie1465]

I think I've found a mod bigger than Dan's custom good woods!

View attachment 960313

Ah....a portable heater built in...hand warmer and vape. Good job

 

[charlie1465]

Morning Shinies

How's everyone doing?

 

[440BB]

Awww that stinks. Beautiful of you to help your dad instead of buying something you REALLY like.

If in the future you’re able to purchase any of these items then don’t forget to post them on the Stabwood Show thread!!

as a matter of fact can you take a photo of the stabwood and post it. You’ll see that a lot of Shinys That would help a lot. I haven’t seen many Arctic mods. I know stabwood mods UK had a few Arctic mods.

and since you’re unable to buy them can you say what US vendor your referring to. I wont buy things from the US stores because they add on the state’s vaping taxes which in my case is 75%!!!!!! Plus add on the shipping cost, ID Fee, and signature at time of delivery.

Truthfully- the whole thing stinks.

I've decided that unless something really moves me I'm going to stick with what I've got. I fed that shinyitis demon by pulling the Ultroner Victory and bronze Reuleaux DNA 250 out of the stockpile and enjoying one at MTL and one at restricted DL.

Wetvapes is where the Arctic Dolphins are, a bit of a crapshoot as you can't tell which one you'll get https://www.wetvapes.com/product/adonis-stabilized-wood-mod-80w-tc/ they don't ship to Massachusetts at this time though.

The Dovpo Riva DNA 250c is at Myvpro, about $80 after the HALLOWEEN20 discount https://myvpro.com/collections/feat...a-dna250c-200w-box-mod?variant=39304327397454 no mention of shipping issues there.

Realistically, I don't know how or whether either of these can be shipped to us at this point or at what cost. Good luck all if either is of interest!

 

[hittman]

I've decided that unless something really moves me I'm going to stick with what I've got. I fed that shinyitis demon by pulling the Ultroner Victory and bronze Reuleaux DNA 250 out of the stockpile and enjoying one at MTL and one at restricted DL.

Wetvapes is where the Arctic Dolphins are, a bit of a crapshoot as you can't tell which one you'll get https://www.wetvapes.com/product/adonis-stabilized-wood-mod-80w-tc/ they don't ship to Massachusetts at this time though.

The Dovpo Riva DNA 250c is at Myvpro, about $80 after the HALLOWEEN20 discount https://myvpro.com/collections/feat...a-dna250c-200w-box-mod?variant=39304327397454 no mention of shipping issues there.

Realistically, I don't know how or whether either of these can be shipped to us at this point or at what cost. Good luck all if either is of interest!

That’s a great price on the Riva. I think I paid about $100.

 

[440BB]

That’s a great price on the Riva. I think I paid about $100.

I know! I don't need it but with impending restrictions, the form factor and that great board it's pretty irresistable. I also like ostrich leather for grippiness lol.

With shipping and taxes it totals about $100 though. No remorse for you!

 

[Javichu]

Hiya folks!!

Today in the morning i had a translating gig so in the market for a Top airfow single coil ''clone'' from FT,was thinking of getting another Juggy Mini but maybe there is another good model i might have missed.

To be honest it wasn't even worth doing the job today,translated for them for 3 and a half hours at the ford dealership,electronic store and Phone House.

When they first called they knew how i much i charged per hour,measly 12 euros an hour which by the way is below the ''normal'' price of 18 to 20 euros an hour,i am not greedy and charging less is a good way to get some more work.

Anyway the three and a half hours go by and they hand me a 20 euro bill...I'm like??
Excuse me? it's 12 per hour,3 and a half hours would be 42 euros not 20.

Started making excuses,that they didn't like my translating,i lacked skills,bad attitude,way to expensive yadda yadda yadda.
Said fine,pay me what you want but i am going right now to the Phone House and electronic shop (got them a 15% discount there) so they can blacklist you for life,same for the Ford Dealership (they were looking at a new car there) and while I'm at it i will also blacklist you at the Citroen,Peugeot and Audi/Volkswagen dealerships.

I hate getting into Hulk mode but when people want to do me wrong like this i gotta put on my serious face so they know i mean business.

They paid me and got out of dodge,hate when people low ball you like that.

Well anyway,got some spare cash to spend on myself so any advice on a good single coil/top airflow clone i could get from FT?

 

[hittman]

I know! I don't need it but with impending restrictions, the form factor and that great board it's pretty irresistable. I also like ostrich leather for grippiness lol.

With shipping and taxes it totals about $100 though. No remorse for you!

I ordered mine from New Vaping in the UK. I went into panic mode earlier this year and bought the Riva, thelema 250, two Odin mini dna75c, and a Hyperion.

 

[hittman]

Hiya folks!!

Today in the morning i had a translating gig so in the market for a Top airfow single coil ''clone'' from FT,was thinking of getting another Juggy Mini but maybe there is another good model i might have missed.

To be honest it wasn't even worth doing the job today,translated for them for 3 and a half hours at the ford dealership,electronic store and Phone House.

When they first called they knew how i much i charged per hour,measly 12 euros an hour which by the way is below the ''normal'' price of 18 to 20 euros an hour,i am not greedy and charging less is a good way to get some more work.

Anyway the three and a half hours go by and they hand me a 20 euro bill...I'm like??
Excuse me? it's 12 per hour,3 and a half hours would be 42 euros not 20.

Started making excuses,that they didn't like my translating,i lacked skills,bad attitude,way to expensive yadda yadda yadda.
Said fine,pay me what you want but i am going right now to the Phone House and electronic shop (got them a 15% discount there) so they can blacklist you for life,same for the Ford Dealership (they were looking at a new car there) and while I'm at it i will also blacklist you at the Citroen,Peugeot and Audi/Volkswagen dealerships.

I hate getting into Hulk mode but when people want to do me wrong like this i gotta put on my serious face so they know i mean business.

They paid me and got out of dodge,hate when people low ball you like that.

Well anyway,got some spare cash to spend on myself so any advice on a good single coil/top airflow clone i could get from FT?

That’s terrible! They should be ashamed of themselves. You should have gotten paid in full and they should have tipped you since your rate is lower than normal.

 

[Territoo]

That’s terrible! They should be ashamed of themselves. You should have gotten paid in full and they should have tipped you since your rate is lower than normal.

I agree. I hate greedy people.

 

[pt91]

Hiya folks!!

Today in the morning i had a translating gig so in the market for a Top airfow single coil ''clone'' from FT,was thinking of getting another Juggy Mini but maybe there is another good model i might have missed.

To be honest it wasn't even worth doing the job today,translated for them for 3 and a half hours at the ford dealership,electronic store and Phone House.

When they first called they knew how i much i charged per hour,measly 12 euros an hour which by the way is below the ''normal'' price of 18 to 20 euros an hour,i am not greedy and charging less is a good way to get some more work.

Anyway the three and a half hours go by and they hand me a 20 euro bill...I'm like??
Excuse me? it's 12 per hour,3 and a half hours would be 42 euros not 20.

Started making excuses,that they didn't like my translating,i lacked skills,bad attitude,way to expensive yadda yadda yadda.
Said fine,pay me what you want but i am going right now to the Phone House and electronic shop (got them a 15% discount there) so they can blacklist you for life,same for the Ford Dealership (they were looking at a new car there) and while I'm at it i will also blacklist you at the Citroen,Peugeot and Audi/Volkswagen dealerships.

I hate getting into Hulk mode but when people want to do me wrong like this i gotta put on my serious face so they know i mean business.

They paid me and got out of dodge,hate when people low ball you like that.

Well anyway,got some spare cash to spend on myself so any advice on a good single coil/top airflow clone i could get from FT?

Shady people. I hope they go out of business.
It is a shame the augvape single rta is very hard to find. I see a blue one here Augvape Intake RTA
I used them exclusively for years. No issues with them, I am just in top flow mesh rta land right now.
Hope you find what you are looking for.

 

[chanelvaps]

I want to buy a Blotto but up until now have only ordered from out of the country (trying to avoid being hit with a tax bill)
I do not, however, want to wait forever for it.
Someone please let me know if this worrying about buying from the US is a reality or not. Fasttech has them. I just want it sooner than 4 weeks

 

[hittman]

I want to buy a Blotto but up until now have only ordered from out of the country (trying to avoid being hit with a tax bill)
I do not, however, want to wait forever for it.
Someone please let me know if this worrying about buying from the US is a reality or not. Fasttech has them. I just want it sooner than 4 weeks

I just got the Vaping Cheap email and it looks like business as usual. I saw the link for the Riva on the cheap.

 

[AngeNZ]

Morning shinies

Hiya folks!!

Today in the morning i had a translating gig so in the market for a Top airfow single coil ''clone'' from FT,was thinking of getting another Juggy Mini but maybe there is another good model i might have missed.

To be honest it wasn't even worth doing the job today,translated for them for 3 and a half hours at the ford dealership,electronic store and Phone House.

When they first called they knew how i much i charged per hour,measly 12 euros an hour which by the way is below the ''normal'' price of 18 to 20 euros an hour,i am not greedy and charging less is a good way to get some more work.

Anyway the three and a half hours go by and they hand me a 20 euro bill...I'm like??
Excuse me? it's 12 per hour,3 and a half hours would be 42 euros not 20.

Started making excuses,that they didn't like my translating,i lacked skills,bad attitude,way to expensive yadda yadda yadda.
Said fine,pay me what you want but i am going right now to the Phone House and electronic shop (got them a 15% discount there) so they can blacklist you for life,same for the Ford Dealership (they were looking at a new car there) and while I'm at it i will also blacklist you at the Citroen,Peugeot and Audi/Volkswagen dealerships.

I hate getting into Hulk mode but when people want to do me wrong like this i gotta put on my serious face so they know i mean business.

They paid me and got out of dodge,hate when people low ball you like that.

Well anyway,got some spare cash to spend on myself so any advice on a good single coil/top airflow clone i could get from FT?

There's not many other options in the single coil, top air bracket. The JK Mini is the only one I can see at FT, other than the Kylin Mini v2 rta.

 

[chanelvaps]

I just got the Vaping Cheap email and it looks like business as usual. I saw the link for the Riva on the cheap.

Vaping Cheap just refers one to a product right? My question is: If I buy from a USA vendor will I get a tax bill the end of the year for it?

 

[Daniel Forsyth]

Good Morning Shiny People

 

[hittman]

Vaping Cheap just refers one to a product right? My question is: If I buy from a USA vendor will I get a tax bill the end of the year for it?

Your guess is as good as mine. I haven’t ordered from a US vendor in a long time. Speaking of which, my Everzon order arrived today with five spools of Clapton wire.

 

[chanelvaps]

Your guess is as good as mine. I haven’t ordered from a US vendor in a long time. Speaking of which, my Everzon order arrived today with five spools of Clapton wire.

I guess I am ordering form Fasttech then. Thanks Hitt.