Shinyitis Support Group

[Javichu]

Good to hear from you Javi.

I've got the SBS kit so I'm using the Kreimhild tank. The included 0.2/0.3 coils are ok but it's not really my style. I vape it a 25w max with the airflow ring nearly closed down completely. It's a perfect match on the SBS though

Hope you're getting a break now and then

Hiya buddy.

I did like the Kreimhild tank but i had some leaking,looked at the o-rings,checked and rechecked to make sure it was assembled correctly and still couldn't find a solution,pains me thou because it is a solid atomizer but the coils a bit pricey thou.

Pumped for the Aegis but coils do seem a bit high wattage for me,will have to look around and see what other coils i can fit.

Normally my go to place is coils between 0.20 and 0.30ohms and wattage varies from 28 to mid 30's.

Seems a lot of the makers of drop in coil tanks either go MTL or pure high wattage,there isn't really much to choose from that is in between those 2 type of vaping.

And about getting a break,well that i get but mostly at night time when my pops is asleep then i got free time to listen to music or watch some movies.

Still hoping that the lotto dream becomes a reality,not much maybe a quarter of a mill,enough for a small house and to get me a nice camper van so i get off the grid on the weekends

Hope you doing ok buddy,you know staying healthy and being safe.

 

[charlie1465]

Hiya buddy.

I did like the Kreimhild tank but i had some leaking,looked at the o-rings,checked and rechecked to make sure it was assembled correctly and still couldn't find a solution,pains me thou because it is a solid atomizer but the coils a bit pricey thou.

Pumped for the Aegis but coils do seem a bit high wattage for me,will have to look around and see what other coils i can fit.

Normally my go to place is coils between 0.20 and 0.30ohms and wattage varies from 28 to mid 30's.

Seems a lot of the makers of drop in coil tanks either go MTL or pure high wattage,there isn't really much to choose from that is in between those 2 type of vaping.

And about getting a break,well that i get but mostly at night time when my pops is asleep then i got free time to listen to music or watch some movies.

Still hoping that the lotto dream becomes a reality,not much maybe a quarter of a mill,enough for a small house and to get me a nice camper van so i get off the grid on the weekends

Hope you doing ok buddy,you know staying healthy and being safe.

With the Kreimhild tank you will get leaking when you refill and leave the top cap off too long....it floods it. If you get the bottle ready, whip the top cap off, fill then cap back on as quickly as possible....it worked for me

 

[hittman]

I got a couple rbas for the Kriemhild 2. It works pretty well. I wish Sourcemore would send accessories like that with the test samples. Many manufacturers do send extra stuff.

 

[ShowMeTwice]

Good Morning @charlie1465
My camera is all warmed up and ready to go Mate so here's a couple of Lovely mod pictures for you carefully caressed by my little hands
View attachment 961171
View attachment 961173
It's Very Nice and comfortable to hold and vape with

She is a stunner Daniel. Really purdy. Your black Brunhilde is a perfect match. Nice matchy drip tip too.

Major Winner!!!

 

[ShowMeTwice]

Thanks Dan....I'm sure that's what it is as at the moment it's not even saturated overnight. I don't vape that much either...maybe 5-6 good pulls and then I leave it. Sometimes much less as I always have at least 8-9 setup's on the go for different recipes

I never get dry hits on my Brunhilde and I am able to chain vape her with no problems. The stainless steel wires suck the juice up onto the wick and keep it saturated. I've even let it sit for a couple days to see if the wick would stay saturated, it did.

Before I got mine I read somewhere that if the SS wires are not clean then there would be juice transport issues. @Daniel Forsyth also may have mentioned that. I wonder if that is your problem.

When I got mine I pulled the 2 stainless steel wires and soaked them for about an hour in Vodka to clean them. Let them dry. Made certain my hands were very clean and reinstalled them.

Another thing, I have a 3mm ID 26/36 ss316L clapton coil installed in mine. IMO, Brunhilde performs better with a larger coil ID. I tried a 2.5mm coil, was just ok, when I went to a 3mm coil it was like night and day. Maybe consider trying a 3mm coil.

And yes, fluff the ever living out of your tails. The extra air between individual strands of cotton helps to suck up more juice.

 

[ShowMeTwice]

normally around 30/70 PG/VG

FWIW, I've had no issues with 30/70 or 20/80 (pg/vg) in my Brunhilde.

 

[ShowMeTwice]

Good morning, afternoon and evening Folks.

Hope you enjoy your day!!!

 

[AngeNZ]

Morning shinies

I love this company. I ordered me some alien wire from them. I'll roll my own coils..very reasonable shipping rates.
The pre built coils aren't in my ohm range, and the id is 3.5mm...bit big.

When I was on my flat wire run, I got Zivipf recommended to me. I love how they also have plenty of options in the clapton, fused clapton etc wire range - even my fave 30*2/38. You can test drive their current NZ shipping time for me

 

[Fredman1]

Another thing, I have a 3mm ID 26/36 ss316L clapton coil installed in mine. IMO, Brunhilde performs better with a larger coil ID. I tried a 2.5mm coil, was just ok, when I went to a 3mm coil it was like night and day. Maybe consider trying a 3mm coil.

I also found the 2.5mm coil mediocre. 3.0mm performed much better. Yesterday I fished out a St St fused clapton laying around...it's a 3.5mm, and works even better
Yeah Mrs Brunhilde likes it Big

 

[Fredman1]

You can test drive their current NZ shipping time for me

Deal Sista

 

[Resistance]

Greetings Shiny Folk!

 

[Zazie]

Another thing, I have a 3mm ID 26/36 ss316L clapton coil installed in mine. IMO, Brunhilde performs better with a larger coil ID. I tried a 2.5mm coil, was just ok, when I went to a 3mm coil it was like night and day. Maybe consider trying a 3mm coil.

In the MTL version?

 

[Daniel Forsyth]

She is a stunner Daniel. Really purdy. Your black Brunhilde is a perfect match. Nice matchy drip tip too.

Major Winner!!!

Thanks Heaps SMT

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Fidola13]

Took some pics of my 2 Lunas at the weekend:

View attachment 961163

Nice to see some Luna love and those are beautiful.

 

[AngeNZ]

Nice to see some Luna love and those are beautiful.

The fluffy Luna fluffs all over them, sits on them, and yet they still work and look amazing. I've been using the blue Luna lately, so it's the fluffiest and flatist (tech. term).

 

[Nailz]

Seems sourcemore shipping is a lot better, or I got really lucky, order I placed 6 days ago is already in LA, USPS tracking now showing it, and says it will be here Monday, that be a record for me if that is true.

Well it was a day later than they 1st posted, but sure not going to complain about taking 10 days from order date, amazing can't get a dishwasher as all stuck out at sea, but can get my vape mail in 10 days

 

[Fredman1]

Before I got mine I read somewhere that if the SS wires are not clean then there would be juice transport issues. @Daniel Forsyth also may have mentioned that. I wonder if that is your problem.

I find that very interesting. That might be why I had near dry hits from new. It's a thing of the past now.

 

[Pigs]

Hello all.
Nothing much shinyitis-wise to report from me right now. List is long but nothing in transit.
Hope everyone's doing well.

 

[hittman]

I’m spending some quality time with the Dead Rabbit 3 rda tonight. I rarely use rdas and only squonk when I’m reviewing one. This one seems really good. Very good flavor with the stock coils. It’s cool how it has slotted or honeycomb airflow to choose from.