Shinyitis Support Group

[DeloresRose]

Better yet a motorcycle with a V10 Dodge Viper engine

View attachment 972799

On a more serious note about pods well even if we are not fans of them but there must be a market for them because a lot of vaping companies just as of late seem to be pumping them out like crazy.

Personally i do not like them for everyday use but i could see where it could work for some vapers *shrug*

Side note and useless trivia-

I made the rear lights (windows) for the viper. Not sure if this is true, but we were told our factory made all of them, and if so my hands were on every one of them.

Worst design ever. 1/4” glass, about 7” wide x almost 5’ long, with 5 1/2” drill holes. So weak and flimsy, almost impossible not to break. Lowest production percentage in the history of the factory with less than 10% of them making it through cutting, drilling, grinding, logos, and tempering to the packing crate. I imagine there was a similar breakage issue during the installation.

When I ran the grinding department, we averaged 98% success with parts that went through all of our processes. We were at 70% just drilling viper lights.

 

[Hightech Redneck]

You should also take a month's supply of juice. See my post in Bad vape day. Kinda like a bad hair day lol.

Got a 2 week supply lol.
If i try to take much more ill have to change to a duffle bag.....

Oh i never updated anyone in her vape journey.
It is the salts she likes specifically for the drier vape. Got her a smok novo x and menthol juice and it has worked for the last few weeks. Kinda envious that a 2 week supply for her will fit in a sandwich bag lmao.
Hope yall have a good week.
Raining here and going to drag the camper to the beach. Rest of the week looks decent though.

 

[chanelvaps]

I just popped in to report some failures of the Freemax stuff I reviewed. Those threads are closed, so I can’t post there, but I thought you’d like to know.

The Marvos S still works, however the pod won’t stay seated - and when it is even slightly ajar, the mid resets to 50W, burning the coil.

The Onnix pod no longer works at all in off/draw activated mode, but works as a draw activate in power mode.

And the Marvos T switches to green/highest power. I can change it back, but it goes to green the first hit. This one is has been pitched.
I was almost out of coils for all of them and have a few packs in a cart somewhere, but I’ll just skip it.

So far the S 60W is still working just fine, but it’s likely just a matter of time before that dies on me too.

Wow, thanks for telling us D

 

[Javichu]

I just popped in to report some failures of the Freemax stuff I reviewed. Those threads are closed, so I can’t post there, but I thought you’d like to know.

The Marvos S still works, however the pod won’t stay seated - and when it is even slightly ajar, the mid resets to 50W, burning the coil.

The Onnix pod no longer works at all in off/draw activated mode, but works as a draw activate in power mode.

And the Marvos T switches to green/highest power. I can change it back, but it goes to green the first hit. This one is has been pitched.
I was almost out of coils for all of them and have a few packs in a cart somewhere, but I’ll just skip it.

So far the S 60W is still working just fine, but it’s likely just a matter of time before that dies on me too.

Dang,sorry to hear.

Yeah things not good on my end,had to stop using the Freemax Marvos S 80W because the ohms would jump up by like more than twice the ohms stated on the coil.
Take the 0.15 ohm coil for example,few times i got it under 0.20 ohms,rest of the time i would linger between 0.25 and 0.28 ohms,at it's worst it would reach a peak of 0.31 ohms.

Same can be said about the other coil,now since the pod has a 510 i just used one of my other mods and haven't had any problems since then,the correct ohms were read by the mod (slight 0.01 to 0.03 variance which isn't bad).

Can't remember where but a couple of reviewers said there were some problems with the chip in it,that could be the culprit of wrong readings.

Still have to write the review for the Freemax Marvos S 80W but so far meh,not really impressed with the mod.
Coils on the other hand pretty good,not as good as the MX coils of the Maxus Max but pretty close,not as much durability thou...the MS coils lasted a bit less than the MX coils.

Side note and useless trivia-

I made the rear lights (windows) for the viper. Not sure if this is true, but we were told our factory made all of them, and if so my hands were on every one of them.

Worst design ever. 1/4” glass, about 7” wide x almost 5’ long, with 5 1/2” drill holes. So weak and flimsy, almost impossible not to break. Lowest production percentage in the history of the factory with less than 10% of them making it through cutting, drilling, grinding, logos, and tempering to the packing crate. I imagine there was a similar breakage issue during the installation.

When I ran the grinding department, we averaged 98% success with parts that went through all of our processes. We were at 70% just drilling viper lights.

Color me impressed!! you did actual work on the Viper!!!
Cooool!!

I was actually living in Canada when it just came out,client of our restaurant actually bought one and took me for a ride.
Earlier versions had the side exhausts so yeah i burned my ankle really bad lol but totally worth it,yeah the car may have it's flaws but as a car enthusiast i still love it,just something about it resonates with me.

 

[hittman]

Good morning Shiny people.

My order from Sourcemore I placed on January 28th is out for delivery. I can't believe it.

I'll have to check the tracking on mine. I had one stuck in customs since January and they reshipped in March but still haven't gotten it. I'm about ready to give up on them.

 

[Territoo]

I got vape mail coming today. Three rba's I bought from @AvaOrchid off the classifieds.

 

[pt91]

Came back to the office today and 3 packages were jammed into my mail slot.
I got married Thursday and the pod (my first) was for the wedding chapel. I figured it would fit into my suit jacket without bulk. There were a lot of shipping delays but I wasn't too bummed as I had an old Orion that fit the bill for the chapel.
Loaded up on the SBSs for about $10 each. Really wanted to try the Kumos since I love the Cabeos so much.
Going to be a fun night getting these set up.
Hope everyone is well.

 

[hittman]

Came back to the office today and 3 packages were jammed into my mail slot.
I got married Thursday and the pod (my first) was for the wedding chapel. I figured it would fit into my suit jacket without bulk. There were a lot of shipping delays but I wasn't too bummed as I had an old Orion that fit the bill for the chapel.
Loaded up on the SBSs for about $10 each. Really wanted to try the Kumos since I love the Cabeos so much.
Going to be a fun night getting these set up.
Hope everyone is well.
View attachment 973044

Congrats on getting married and on the vape mail.

 

[DeloresRose]

Came back to the office today and 3 packages were jammed into my mail slot.
I got married Thursday and the pod (my first) was for the wedding chapel. I figured it would fit into my suit jacket without bulk. There were a lot of shipping delays but I wasn't too bummed as I had an old Orion that fit the bill for the chapel.
Loaded up on the SBSs for about $10 each. Really wanted to try the Kumos since I love the Cabeos so much.
Going to be a fun night getting these set up.
Hope everyone is well.
View attachment 973044

Congrats! Wishing you all the happiness.

 

[AngeNZ]

Morning shinies

Despite being fanatical about rewicking my RTAs every 3 days - I've been slack with my Axial RDAs.

I finally rewicked them this morning after 2 weeks of use, even though they were vaping ok. My caramel Axial's wick was so black I wanted to take a pic for prosperity - but it was making me hurl, so I couldn't

I'm such a girly blouse

 

[Daniel Forsyth]

Good Morning Shiny People

 

[pt91]

Morning shinies

Despite being fanatical about rewicking my RTAs every 3 days - I've been slack with my Axial RDAs.

I finally rewicked them this morning after 2 weeks of use, even though they were vaping ok. My caramel Axial's wick was so black I wanted to take a pic for prosperity - but it was making me hurl, so I couldn't

I'm such a girly blouse

Not fanatical IMO. I rewick every 24-36 hours. I usually only vape one atty at a time though. Once the flavor changes it pulls into the pits for an overhaul. Most coils get replaced about every 4 weeks.

 

[AvaOrchid]

I just got a kumo RTA the aspire prestige line jammy from @hazozita And I feel like I purchased it direct from like the manufacturer It's in such good condition. Every little element of the box is even perfect which really makes me happy cuz I'm a box fiend. I'm like such a box fiend that I value the box at like 33% of the value of the product and it's a nice box. Lol but the product is pristine and I cannot wait to try it out. But I'm going to make myself wait because I'm trying something else out today

 

[borno]

Side note and useless trivia-

I made the rear lights (windows) for the viper. Not sure if this is true, but we were told our factory made all of them, and if so my hands were on every one of them.

Worst design ever. 1/4” glass, about 7” wide x almost 5’ long, with 5 1/2” drill holes. So weak and flimsy, almost impossible not to break. Lowest production percentage in the history of the factory with less than 10% of them making it through cutting, drilling, grinding, logos, and tempering to the packing crate. I imagine there was a similar breakage issue during the installation.

When I ran the grinding department, we averaged 98% success with parts that went through all of our processes. We were at 70% just drilling viper lights.

Da vindo viper

 

[Territoo]

I just got a kumo RTA the aspire prestige line jammy from @hazozita And I feel like I purchased it direct from like the manufacturer It's in such good condition. Every little element of the box is even perfect which really makes me happy cuz I'm a box fiend. I'm like such a box fiend that I value the box at like 33% of the value of the product and it's a nice box. Lol but the product is pristine and I cannot wait to try it out. But I'm going to make myself wait because I'm trying something else out today

You're right. A product has a higher resale value if you keep its box.

 

[Fidola13]

Like one of your VA Knight's you mean?
Send me a PM with a Shiny price

I think I only have one but I’ll check for you. They really are very beautiful!

 

[Tor R]

Came back to the office today and 3 packages were jammed into my mail slot.
I got married Thursday and the pod (my first) was for the wedding chapel. I figured it would fit into my suit jacket without bulk. There were a lot of shipping delays but I wasn't too bummed as I had an old Orion that fit the bill for the chapel.
Loaded up on the SBSs for about $10 each. Really wanted to try the Kumos since I love the Cabeos so much.
Going to be a fun night getting these set up.
Hope everyone is well.
View attachment 973044

congrats getting married.
Nice haul !!!!
Currious how Kumo is as MTL

 

[Fidola13]

I really really the looks of the Think Vape Craton. I’ve never heard of this company before though. Well that I can remember. It has a DNA 100C in it. Does anyone here have one or have read any reviews on it? I’m going to check YouTube for any video reviews.

please tell me NO!!!!

 

[Territoo]

 

[pt91]

congrats getting married.
Nice haul !!!!
Currious how Kumo is as MTL

Thank you. I lost my wife to cancer over 8 years ago and it took some time to start dating. I had almost given up when we found each other 6 years ago.
Just built the Kumo and the airflow is more restricted than I thought. I put a 3mm .40 coil in it. I think it would be much better with a .60 or .70. It is a bit warm fully open.
I tried to build it like my Cabeos I guess which have much more airflow.
The Kumo is easier to build but holds less liquid.
It is very well machined.
I just need to find the right build for it I think.
I will work on that.