Shinyitis Support Group

[Javichu]

Happy Birthday!!! Keep your head up. 47 isn’t old. Just getting started.

Happy birthday!
I'm a whole year older than you. And in maturity levels, I'm a 10yo.

Happy Happy Birthday Buddy
I hope you have an absolutely fantastic day

And try to keep yourself cool Mate I'm trying to heat up over here, it's bloody chilly

Happy Birthday Javichu!

Thanks a bunch folks,much appreciated

8 am here and market day,pops really likes Nisperos (common medlar) so after having my morning tea (still miss coffee) I'm off to the market bright and early to get him some,then shopping as usual.

Apart from that not much to tell,oh yeah forgot funny story that happened on Thursday.

So i am leaving my hair long and I'm at that stage that it's long but not long enough to get it all in a proper pony tail it when it gets in the way so while at home at only AT HOME i am using these:

No biggie,i mean it works and no one can see me at home so it's cool.
Anyway shopping day on Thursday,2 different supermarkets,1 butcher,1 fruit stand,1 lottery place and 1 pharmacy and no one told me i was still wearing the damn thing

I'm off to do some more shopping,since I'm not going out tonight i might get myself a bottle of that Bailey's knockoff and tonight maybe I'll get a nice buzz going on hehe.

Talk to you later folks,have a nice day

 

[Pigs]

Thanks a bunch folks,much appreciated

8 am here and market day,pops really likes Nisperos (common medlar) so after having my morning tea (still miss coffee) I'm off to the market bright and early to get him some,then shopping as usual.

Apart from that not much to tell,oh yeah forgot funny story that happened on Thursday.

So i am leaving my hair long and I'm at that stage that it's long but not long enough to get it all in a proper pony tail it when it gets in the way so while at home at only AT HOME i am using these:

View attachment 976150

No biggie,i mean it works and no one can see me at home so it's cool.
Anyway shopping day on Thursday,2 different supermarkets,1 butcher,1 fruit stand,1 lottery place and 1 pharmacy and no one told me i was still wearing the damn thing

I'm off to do some more shopping,since I'm not going out tonight i might get myself a bottle of that Bailey's knockoff and tonight maybe I'll get a nice buzz going on hehe.

Talk to you later folks,have a nice day

Happy Birthday @Javichu

 

[Bigbob2322]

Happy Birthday @Javichu

 

[Pigs]

Just made my first purchase is a while - an SXK DotShell clone rba from FT.

$28.90 SXK DotShell Styled RBA Atomizer for dotAIO Kit (Silver) - 1 + 1.2 + 1.5 + 2mm MTL air pins at FastTech - Free Shipping

The Atmizoo-designed Qbix is still my favourite boro rba. Bullet proof, never floods, never dry hits, great flavour.
The Qbix design was based on the DotShell. Pretty much identical deck and AF so my hopes are high for the Dotshell. Also heard lots of good things about it.

 

[Zazie]

Happy birthday, @Javichu.

 

[Javichu]

Happy birthday, @Javichu.

Thanks a bunch

So just got a message saying i am getting some vapemail on Monday,problem is i got no idea what I'm getting.
Waiting for 4 packages at the moment,Wenax H1 pod from the Geekvape giveaway,RPM 5 & RPM 5 PRO from smok for review purposes,Another Smok device from the Elego giveaway and a bunch of stuff from Freemax also for review purposes.

2 of the packages already in the country so this week I will be busy trying out new stuff.

Apart from that not much to tell,chilling at home and binge watching all episodes of Franklin and Bash

 

[borno]

Thanks a bunch

So just got a message saying i am getting some vapemail on Monday,problem is i got no idea what I'm getting.
Waiting for 4 packages at the moment,Wenax H1 pod from the Geekvape giveaway,RPM 5 & RPM 5 PRO from Smok for review purposes,Another Smok device from the Elego giveaway and a bunch of stuff from Freemax also for review purposes.

2 of the packages already in the country so this week I will be busy trying out new stuff.

Apart from that not much to tell,chilling at home and binge watching all episodes of Franklin and Bash

You forgot you have to shop for some reading glasses now

 

[FranC]

Happy Birthday, Javichu

 

[Javichu]

You forgot you have to shop for some reading glasses now

Hey not my fault i don't know what i am getting,only have like 1 tracking number so at this juncture it's just a game of guessing

P.S: Did i get the reading glasses joke or did i get it wrong? started b-day celebration early lol

Happy Birthday, Javichu

Thanks buddy

 

[hittman]

Thanks a bunch

So just got a message saying i am getting some vapemail on Monday,problem is i got no idea what I'm getting.
Waiting for 4 packages at the moment,Wenax H1 pod from the Geekvape giveaway,RPM 5 & RPM 5 PRO from Smok for review purposes,Another Smok device from the Elego giveaway and a bunch of stuff from Freemax also for review purposes.

2 of the packages already in the country so this week I will be busy trying out new stuff.

Apart from that not much to tell,chilling at home and binge watching all episodes of Franklin and Bash

I’m glad you are still doing some reviews.

 

[chanelvaps]

Happy BIrthday, Javi!

 

[Tor R]

Happy Birthday @Javichu

And Good morning folks

 

[Javichu]

Sorry to beat a dead horse folks but there is something i just can't get out of my mind.

Every time i see you folks posting a pic of the Juggy MR i think back to the issues i had with it.
Had to look back at posts from last year and i found a pic i took of the gasket problem i was having with the Juggy MR:

Red arrows show where the gasket would just bend outwards,once enough bending occurred that is when i got massive spitback.

Ok so a couple of details that are important:

-Never jammed the nozzle down the hole,so there is no ''bending'' from refilling
-Screwing the top back i always made sure it was horizontal and i always did the reverse thread first,feel the click then just screw the top in.

I have already taken off the table that it could be user error.
Sent like 5 emails to QP Designs and no answer,so i am still a bit baffled about the whole thing.
I mean i see you folks post pics of the Juggy MR day in and day out and as far as i know none of you have had any issues with it.

Only logical thing that comes to mind is that it was a bad batch...because remember it happened with 2 of them.
First one the gasket started going outwards,replaced it with the one in the spare parts baggie and then the same thing happened.
Store took it back then i got a replacement and more of the same with the second one...

This is just odd...it's like this little thorn on my head that just keeps on coming up,can't get it out of my mind.

P.S: All this long and lengthy diatribe is because it's the atty i have liked the most...and there is still a couple for sale here in Spain

 

[AngeNZ]

Morning shinies

Only logical thing that comes to mind is that it was a bad batch...because remember it happened with 2 of them.
First one the gasket started going outwards,replaced it with the one in the spare parts baggie and then the same thing happened.
Store took it back then i got a replacement and more of the same with the second one...

I've been conscious of mine since my first fill, and it's still in perfect shape. That said - I haven't had my MR rta for long.

There are duds in everything. That your two had the problem and were numbered sequentially - would make me blame it on a bad batch.

 

[Bigbob2322]

Sorry to beat a dead horse folks but there is something i just can't get out of my mind.

Every time i see you folks posting a pic of the Juggy MR i think back to the issues i had with it.
Had to look back at posts from last year and i found a pic i took of the gasket problem i was having with the Juggy MR:

View attachment 976180
Red arrows show where the gasket would just bend outwards,once enough bending occurred that is when i got massive spitback.

Ok so a couple of details that are important:

-Never jammed the nozzle down the hole,so there is no ''bending'' from refilling
-Screwing the top back i always made sure it was horizontal and i always did the reverse thread first,feel the click then just screw the top in.

I have already taken off the table that it could be user error.
Sent like 5 emails to QP Designs and no answer,so i am still a bit baffled about the whole thing.
I mean i see you folks post pics of the Juggy MR day in and day out and as far as i know none of you have had any issues with it.

Only logical thing that comes to mind is that it was a bad batch...because remember it happened with 2 of them.
First one the gasket started going outwards,replaced it with the one in the spare parts baggie and then the same thing happened.
Store took it back then i got a replacement and more of the same with the second one...

This is just odd...it's like this little thorn on my head that just keeps on coming up,can't get it out of my mind.

P.S: All this long and lengthy diatribe is because it's the atty i have liked the most...and there is still a couple for sale here in Spain

I have the same issue with bending fill port gaskets on all 3 True RTA's I own, no spit back though.

 

[Daniel Forsyth]

Good Morning Shiny People

 

[AngeNZ]

After 34 days slingshotting between Dongguan City and Guangzhou City, my Orbit found a plane to NZ. After spending 10 days slingshotting around NZ customs, it's now on it's way down to me

 

[Letitia]

Sorry to beat a dead horse folks but there is something i just can't get out of my mind.

Every time i see you folks posting a pic of the Juggy MR i think back to the issues i had with it.
Had to look back at posts from last year and i found a pic i took of the gasket problem i was having with the Juggy MR:

View attachment 976180
Red arrows show where the gasket would just bend outwards,once enough bending occurred that is when i got massive spitback.

Ok so a couple of details that are important:

-Never jammed the nozzle down the hole,so there is no ''bending'' from refilling
-Screwing the top back i always made sure it was horizontal and i always did the reverse thread first,feel the click then just screw the top in.

I have already taken off the table that it could be user error.
Sent like 5 emails to QP Designs and no answer,so i am still a bit baffled about the whole thing.
I mean i see you folks post pics of the Juggy MR day in and day out and as far as i know none of you have had any issues with it.

Only logical thing that comes to mind is that it was a bad batch...because remember it happened with 2 of them.
First one the gasket started going outwards,replaced it with the one in the spare parts baggie and then the same thing happened.
Store took it back then i got a replacement and more of the same with the second one...

This is just odd...it's like this little thorn on my head that just keeps on coming up,can't get it out of my mind.

P.S: All this long and lengthy diatribe is because it's the atty i have liked the most...and there is still a couple for sale here in Spain

I've used 4 of my mr 's (at least 2 are always in rotation so used daily) and have zero issues with gaskets. I'm with Ange on this; bad batch that QP should have made right & sent you both a new gasket and top cap.

 

[AngeNZ]

Morning shinies

 

[Ed Brown]

Morning shinies

View attachment 976209

I see a thread on "VAPE ART" coming soon.