AngeNZ

ShutterBug
Supporting Member
ECF Veteran
  • Mar 24, 2018
    11,355
    88,298
    New Zealand
    The Cabeo: I love it. The airflow is beyond smooth, the deck is easy to stick a coil in, it looks gorgeous and the flavour is fantastic :thumbs:

    I used a 2.5mm id mtl staple 4*0.3x0.1/40 coil and I need to switch that for my usual 30*2/38 as I'm finding it too warm. And I know what wattage I prefer that coil at.

    So I'm reserving full judgement until I've stuck that in, and done a few rewicks!
     

    Fredman1

    Vaping Master
    ECF Veteran
    Mar 27, 2017
    4,052
    22,790
    68
    New Zealand
    The Cabeo: I love it. The airflow is beyond smooth, the deck is easy to stick a coil in, it looks gorgeous and the flavour is fantastic :thumbs:

    I used a 2.5mm id mtl staple 4*0.3x0.1/40 coil and I need to switch that for my usual 30*2/38 as I'm finding it too warm. And I know what wattage I prefer that coil at.

    So I'm reserving full judgement until I've stuck that in, and done a few rewicks!

    I knew it..I Knew it..I KNEW it :banana:
    What I love most is the saturated vape.
     

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,433
    57,078
    45
    Victoria, Australia

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Thanks for the heads up Mate, I'll have to have a little perusal:thumb:
    Got a little Z1 sbs kit with the Siren III rta for AUD$25 (about 17 bucks US) No postage - I'll pick it up.
    @hittman didn't you buy the Z1 when they first came out? I remember something about bland stabwood colours not matching the pictures. Is the chip any good?
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,597
    179,959
    Somewhere between here and there
    Got a little Z1 sbs kit with the Siren III rta for AUD$25 (about 17 bucks US) No postage - I'll pick it up.
    @hittman didn't you buy the Z1 when they first came out? I remember something about bland stabwood colours not matching the pictures. Is the chip any good?

    Yes, I bought one and got one for review and both were almost identical. I thought I was ordering one with blue panels but the colors were random and the panels were red on both. I guess the chip is ok but to me the output seemed a little weak and I felt like I needed to turn up the output a little higher than normal.
     

    Pigs

    Vaping
    Supporting Member
    ECF Veteran
    Jun 7, 2019
    7,425
    53,314
    Sydney Australia
    Yes, I bought one and got one for review and both were almost identical. I thought I was ordering one with blue panels but the colors were random and the panels were red on both. I guess the chip is ok but to me the output seemed a little weak and I felt like I needed to turn up the output a little higher than normal.
    That all rings a bell. Did you have any thoughts on the Siren III rta/gta?
     

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,597
    179,959
    Somewhere between here and there
    That all rings a bell. Did you have any thoughts on the Siren III rta/gta?

    It's been a long time since I used it. I think it was a fairly tight MTL which isn't a great fit for me. I don't remember the flavor being especially good.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,355
    88,298
    New Zealand
    Morning shinies ;)

    1443bSm.jpg
     

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,433
    57,078
    45
    Victoria, Australia
    Got a little Z1 sbs kit with the Siren III rta for AUD$25 (about 17 bucks US) No postage - I'll pick it up.
    @hittman didn't you buy the Z1 when they first came out? I remember something about bland stabwood colours not matching the pictures. Is the chip any good?

    You picked yourself up a pretty nice bargain Mate, enjoy:thumb:
     

    AvaOrchid

    Ultra Member
    ECF Veteran
    Sep 19, 2019
    2,197
    8,316
    USA
    I don't know if I ever mentioned the situation with the prize I won from vaporesso back in mid-April but just in case I did mention that I thought I should also mention that I did receive it today. Never did get tracking but whatever because it arrived so that's what matters. They also sent me what I think is a really cute hat that I will probably wear due to its minimalist branding. The branding is there but unless you vape you are not going to know what kind of hat I am wearing and it doesn't have a plastic adjuster in the back which makes it that much better in my opinion. Anyway just wanted to update And show a picture of the mod still in the box cuz I'm sure we've all seen a gen 200 lol But also the hat which I think is so darn cute as I mentioned before It's just adorable.
    20220621_172949.jpg
     

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,433
    57,078
    45
    Victoria, Australia
    The Worm is out for delivery:w00t: you'll be happy @hittman , you were interested in this one!!
    My Lindwurm RTA and a spare Scylla RTA tank are both on a delivery van on the way to my mailbox:thumb: @Pigs ,you mentioned that you have some vape mail on the way from Fasttech, this FT delivery only took 8 days so Aus. Expedited Air is moving along nicely at the moment;)
     
    Last edited:

    hittman

    ECF Guru
    Supporting Member
    ECF Veteran
    Verified Member
    Contest Winner!
  • Jul 13, 2009
    61,597
    179,959
    Somewhere between here and there
    The Worm is out for delivery:w00t: you'll be happy @hittman , you were interested in this one!!
    My Lindwurm RTA and a spare Scylla RTA tank are both on a delivery van on the way to my mailbox:thumb: @Pigs ,you mentioned that you have some vape mail on the way from Fasttech, this FT delivery only took 8 days so Aus. Expedited Air is moving along nicely at the moment;)

    I’ll impatiently wait to hear what you think. I asked Sourcemore for the blaze and lindwurm and they said I could only have one at a time and were going to send the blaze.
     

    AngeNZ

    ShutterBug
    Supporting Member
    ECF Veteran
  • Mar 24, 2018
    11,355
    88,298
    New Zealand
    this FT delivery only took 8 days so Aus. Expedited Air is moving along nicely at the moment

    It's @Pigs's rocket launcher. Point it our direction!


    But I gotta say, I'm impressed with how fast delivery is from the UK. This is Juggerknot MR no. 2:
    mr2.jpeg
     

    Daniel Forsyth

    Vaping Master
    Supporting Member
    ECF Veteran
  • Mar 26, 2019
    9,433
    57,078
    45
    Victoria, Australia
    Vape Mail:banana:
    My new Lindwurm RTA has arrived safely along with a little Scylla RTA tank:thumb:
    Now I need to give the wriggling Worm a nice warm bath after his trip and because he's a bit more beefier than my Brunhilde MTL RTA's I need to get an appropriate Beefy coil for him!!
    image.jpg
     

    chanelvaps

    ECF Guru
    ECF Veteran
    Verified Member
    Oct 3, 2013
    16,030
    85,307
    Burbank CAlifornia
    I don't know if I ever mentioned the situation with the prize I won from vaporesso back in mid-April but just in case I did mention that I thought I should also mention that I did receive it today. Never did get tracking but whatever because it arrived so that's what matters. They also sent me what I think is a really cute hat that I will probably wear due to its minimalist branding. The branding is there but unless you vape you are not going to know what kind of hat I am wearing and it doesn't have a plastic adjuster in the back which makes it that much better in my opinion. Anyway just wanted to update And show a picture of the mod still in the box cuz I'm sure we've all seen a gen 200 lol But also the hat which I think is so darn cute as I mentioned before It's just adorable.View attachment 976615
    YES! Nice touch adding a prize with a prize. Please report on what you think of the mod once you have used it
     

    Users who are viewing this thread