Shinyitis Support Group

[hittman]

Anyone know where I can find a coil master 521 mini ohms reader? The one that came with my tool bag doesn’t work anymore and I’m tired of getting sticky ejuice all over my mods.
I’ve looked on eBay , Amazon Google etc and can’t find any that don’t cost an arm and a leg. At this point it would be cheaper to buy a whole new vape tool set that includes the ohm reader.
Thanks

I don't know how much shipping is but I found one here.

Coil Master 521 Mini Tab

Multi-functional device designed for both DIY starters and advanced users, the Coil Master 521 Mini Tab assists you in building coils.

www.myvaporstore.com

 

[Letitia]

Anyone know where I can find a coil master 521 mini ohms reader? The one that came with my tool bag doesn’t work anymore and I’m tired of getting sticky ejuice all over my mods.
I’ve looked on eBay , Amazon Google etc and can’t find any that don’t cost an arm and a leg. At this point it would be cheaper to buy a whole new vape tool set that includes the ohm reader.
Thanks

I just cough up the money and order directly from coil master site. Their ohms readers are worth it my opinion and mine have all lasted for years.

 

[Letitia]

@Fidola13 forget ordering directly from CM site; oos on all 4 521 tabs. Shame, I was going to another to add to the stash.

 

[Z-Lee]

Anyone know where I can find a coil master 521 mini ohms reader? The one that came with my tool bag doesn’t work anymore and I’m tired of getting sticky ejuice all over my mods.
I’ve looked on eBay , Amazon Google etc and can’t find any that don’t cost an arm and a leg. At this point it would be cheaper to buy a whole new vape tool set that includes the ohm reader.
Thanks

What about the Geek Vape one?

 

[Letitia]

Amazon has a few 521 tabs. Not as cheap as FT but will deliver much faster.

Good morning Shiny's

 

[chanelvaps]

I'm thinking some course sandpaper from work should do. Maybe I'll have time to try that this weekend. Will let you know if I do!

Ugh, not a fan of sanding and that seems like it would take forever. I was hoping to hear you say we could swipe on something, maybe with a q-tip, that would just dissolve the paint

 

[Territoo]

Anyone know where I can find a coil master 521 mini ohms reader? The one that came with my tool bag doesn’t work anymore and I’m tired of getting sticky ejuice all over my mods.
I’ve looked on eBay , Amazon Google etc and can’t find any that don’t cost an arm and a leg. At this point it would be cheaper to buy a whole new vape tool set that includes the ohm reader.
Thanks

I found one for $19.95 at Gypsy Vapes. Trouble is I've never heard of this site before.

Coil Master 521 Mini Tab | Coil Building Deck

The multi-functional device designed for both DIY starters and advanced users, the Coil Master 521 Mini Tab assists you in building coils. Coil Master 521 Mini Tab driven by a single 18650 battery

gypsyvapes.com

 

[Tor R]

Good afternoon ladies and gentlemen,
I have a little shopping break, will last a month or so, have to get home what has already been paid for before I go crazy again.

Question for those who already have the SXK Ion in silver, is it silver painted aluminum or is it polished brushed aluminium?
And, the 510 connector to the atty, the one at the bottom, is it adjustable?

 

[AngeNZ]

Morning shinies

Juggerknot Mr no. 3 is on its way from Oz

 

[Tor R]

Anyone know where I can find a coil master 521 mini ohms reader? The one that came with my tool bag doesn’t work anymore and I’m tired of getting sticky ejuice all over my mods.
I’ve looked on eBay , Amazon Google etc and can’t find any that don’t cost an arm and a leg. At this point it would be cheaper to buy a whole new vape tool set that includes the ohm reader.
Thanks

BP Mods has one too, a lot of stores have it in there.
I don't know how it compares in terms of price to the Coil Master.

I have Coil Master's, hardly used, a cheap mod, and I have plenty of them, do the job

 

[Technonut]

Good afternoon ladies and gentlemen,
I have a little shopping break, will last a month or so, have to get home what has already been paid for before I go crazy again.

Question for those who already have the SXK Ion in silver, is it silver painted aluminum or is it polished brushed aluminium?
And, the 510 connector to the atty, the one at the bottom, is it adjustable?

The finish is anodized, not painted, and very nicely done IMO... The positive pin is not adjustable.

 

[Technonut]

BP Mods has one too

https://www.fasttech.com/products/9748443

A FT forum member who received the basic version reported:

The ohms read true with only a +/- of .02 at the most when compared to my dna mods. Great value for money!

 

[Daniel Forsyth]

Good Morning Shiny People

 

[Z-Lee]

Ugh, not a fan of sanding and that seems like it would take forever. I was hoping to hear you say we could swipe on something, maybe with a q-tip, that would just dissolve the paint

Maybe an acetoner?

 

[Bigbob2322]

https://www.fasttech.com/products/9748443

A FT forum member who received the basic version reported:

I can vouch for the BP Mods Futon Ohm Tab, very accurate. I have the Panda one. The camera has a hard time picking up the meter readout that is crystal clear.

 

[Fidola13]

What about the Geek Vape one?

I didn’t know that GV made one. Thanks

 

[Fidola13]

I don't know how much shipping is but I found one here.

Coil Master 521 Mini Tab

Multi-functional device designed for both DIY starters and advanced users, the Coil Master 521 Mini Tab assists you in building coils.

www.myvaporstore.com

Unfortunately mvs

BP Mods has one too, a lot of stores have it in there.
I don't know how it compares in terms of price to the Coil Master.

I have Coil Master's, hardly used, a cheap mod, and I have plenty of them, do the job

That’s what I’ve been using a cheap mod. Problem is I have some health issues that make my hands tremble so I end up with ejuice everywhere except on the coil build. I’m going to have to start wearing an apron when I’m working on my gear esp the ejuice lol!!!

Most places I looked were out of stock, cheaply looking made and too much money for a cheap ohm reader that’ll die in a few months.

Thanks for everyone’s suggestions and research. I love this forum. Probably the only forum where people are happy to help each other out and pass on their knowledge.

 

[hittman]

Unfortunately mvs


That’s what I’ve been using a cheap mod. Problem is I have some health issues that make my hands tremble so I end up with ejuice everywhere except on the coil build. I’m going to have to start wearing an apron when I’m working on my gear esp the ejuice lol!!!

Most places I looked were out of stock, cheaply looking made and too much money for a cheap ohm reader that’ll die in a few months.

Thanks for everyone’s suggestions and research. I love this forum. Probably the only forum where people are happy to help each other out and pass on their knowledge.

Does it have to be a mini?

 

[Javichu]

Quick pop in to say hi.

Rocking a bad bad i mean really bad cold...changes in temperature here got me all sick.
Had to call in social services to see if they could send someone to give me a hand in the house because i am bed ridden (should be) and i just can't do it all myself.

Sent a nice lady to help me out and hopefully in a couple of days i will be in better shape.

I did have a pending review to write so i got that done but using my tablet while in bed,hope it came out ok because between the meds and my current state i feel as slow and groggy as a groom the day after his bachelor party....never got married so i am just assuming lol.

Linky here in case anyone wants to give it a looksie:

VooPoo Vinci Pod SE - Review by Javichu

Salutations fellow vaperinos. Today i am going to review the VooPoo Vinci Pod SE which was sent to me by Voopoo for the purposes of this review. As per usual i am going to post some nice pics that will encompass what this device is all about...

www.e-cigarette-forum.com

Well anyway,cooking my pops some food then i am going to sleep an 8 hour siesta once the lady from social services gets here.

Hope you all doing ok and i will talk to you soon.

 

[Daniel Forsyth]

Quick pop in to say hi.

Rocking a bad bad i mean really bad cold...changes in temperature here got me all sick.
Had to call in social services to see if they could send someone to give me a hand in the house because i am bed ridden (should be) and i just can't do it all myself.

Sent a nice lady to help me out and hopefully in a couple of days i will be in better shape.

I did have a pending review to write so i got that done but using my tablet while in bed,hope it came out ok because between the meds and my current state i feel as slow and groggy as a groom the day after his bachelor party....never got married so i am just assuming lol.

Linky here in case anyone wants to give it a looksie:

VooPoo Vinci Pod SE - Review by Javichu

Salutations fellow vaperinos. Today i am going to review the VooPoo Vinci Pod SE which was sent to me by Voopoo for the purposes of this review. As per usual i am going to post some nice pics that will encompass what this device is all about...

www.e-cigarette-forum.com

Well anyway,cooking my pops some food then i am going to sleep an 8 hour siesta once the lady from social services gets here.

Hope you all doing ok and i will talk to you soon.

I hope you're feeling better soon Buddy