Steam Tuners is the only company I know of who makes a top-fill tank section for the Dvarw MTL (22mm and 24mm) and DL. Steam Tuners made them for the OG and FL Dvarw's.
Many folks love 'em.
Steam Tuners direct (for Dvarw DL FL):
steamtuners.com
KHW mods direct:
www.khwmods.com
Good luck finding one, they've been sold-out for quite some time. You can join a Wait List at either site.
I never bought one, was used to bottom filling RTA's going back to the old kayfun's.
Many folks love 'em.
Steam Tuners direct (for Dvarw DL FL):
Dvarw FL DL 24mm Top Fill Kit - Steam Tuners
Top Fill Kit for Dvarw FL DL 24m rta allows the user to refill from the top without unscrewing the tank.The top fill kit consists of a new chamber, a plexi tank,a new top cap and gives the ability of liquid control. *Note : For the kit’s installation it’s necessary to remove only the original...
steamtuners.com
KHW mods direct:
Steam Tuners Dvarw DL FL Top Fill kit – KHW mods
www.khwmods.com
Good luck finding one, they've been sold-out for quite some time. You can join a Wait List at either site.
I never bought one, was used to bottom filling RTA's going back to the old kayfun's.
Good afternoon folks,
I walked a few kilometers today with Øsa, and then I picked up a package from FeV. I'm looking forward to seeing what the reduced chamber is like and getting ready for the Dani SBS Mini
The SS tube and S Airduct are in case I want 7ml capacity.
What you bring up is very instructive, and when I read a bit about Selo Zok I think you are 100% right.
When I get a blood test and the 24/7 blood pressure test, I hope for an answer. I will assume that I will be put on an additional medication to lower my blood pressure.
I have been a bit short between the ears and ate cheese on the evening bread, I love cheese but it is hardly good for cholesterol, a slice now and then is certainly fine but not daily.
I find Dvarw very forgiving in wicking and I think you will be very pleased.
I walked a few kilometers today with Øsa, and then I picked up a package from FeV. I'm looking forward to seeing what the reduced chamber is like and getting ready for the Dani SBS Mini
The SS tube and S Airduct are in case I want 7ml capacity.
Thank you very much for the tips, I really appreciate it.
What you bring up is very instructive, and when I read a bit about Selo Zok I think you are 100% right.
When I get a blood test and the 24/7 blood pressure test, I hope for an answer. I will assume that I will be put on an additional medication to lower my blood pressure.
I have been a bit short between the ears and ate cheese on the evening bread, I love cheese but it is hardly good for cholesterol, a slice now and then is certainly fine but not daily.
I use the method where we lift the wick ends, put on the chamber and then cut the ends.Finally put my Taiful GTR and DVARW 24 clones in for a swim in dish soap. Then a rinse, a bath in isopropyl, dry, and lubricate with PG/VG.
Had a closer look at the build decks.
The GTR looks like a no-brainer to wick and I'm excited to use the JFC. Will cut my tails (rayon) over 50%, maybe up to 75% to test them out. Loving the simplicity of design. No wonder these are popular.
DVARW looks odd to me, being used to juice wells and bottom port holes with juice-well-type areas you tuck the ends of the wick. Not sure if I'll play it safe at a 50% cut or push my luck with a bigger cut. Maybe an exotic cut, like cutting both sides of a horizontal fan. I'll figure it out, it's not rocket science
I find Dvarw very forgiving in wicking and I think you will be very pleased.
You're gonna love it!Morning shinies
My blaze solo rta has finally landed in NZ
Good morning, DanGood Morning Shiny People
Have a wonderful day.
I can't wait! Have you tried a 2.5mm in it? Or is aimed at a 3mm id coil. Since it's for review I haven't watched or read anyone elses. Which is driving me nuts, as I usually read up as much as I can on a new toy in anticipation.
I think a 2.5mm will be too small creating more air to a already airy RTA fully opened up. I know you will try it Ange so keep us informed how it works.
Last edited:
Still have the 3mm in it and will likely keep using 3mm honestly. I suspect flavor would suffer if you go smaller. 3.5 is probably closer to ideal but it would probably need to be a warmer vape to shine.
I'm still on my mech squonker/Galaxies kick. Broke out the Furyan today.
I've been filling up the Galaxies from its deck-based fill port (great design). Interesting how much liquid drips into the squonk bottle over a few days. I wonder if most squonk rdas do this too?
I've been filling up the Galaxies from its deck-based fill port (great design). Interesting how much liquid drips into the squonk bottle over a few days. I wonder if most squonk rdas do this too?
My FeV v4.5S+ with new Evaporator chamber Dual S is up and going:
I first had it on Grus, but, but in TC it is nowhere near Dicodes, about the same setup, much more flavor with Dicodes.
I liked that the FeV had removed the knurling on the chamber, it turned out really nice in a full SS tank, in my opinion.
Now I'm waiting for Dicode's SBS mini to arrive, I'm ready to order, whether there will be one or two I don't know quite yet.
I first had it on Grus, but, but in TC it is nowhere near Dicodes, about the same setup, much more flavor with Dicodes.
I liked that the FeV had removed the knurling on the chamber, it turned out really nice in a full SS tank, in my opinion.
Now I'm waiting for Dicode's SBS mini to arrive, I'm ready to order, whether there will be one or two I don't know quite yet.
Good morning shiny people. I’ve still got some reviews to work on so am going to try to do some of that. No big plans today and no new shiny stuff being delivered today.
Just finished posting my Fat Rabbit 2 Tank review. Another drop in coil sub ohm tank.
www.e-cigarette-forum.com
HELLVAPE FAT RABBIT 2 TANK review by hittman
I’m glad to be back with you today to present yet another review. This time I will attempt to provide you with a fair and honest review on the Hellvape Fat Rabbit 2 Tank that was sent to me by Hellvape. Actually they sent two tanks and spare...
www.e-cigarette-forum.com
Morning everyone
Taifun GTR Clone First Impressions:
Set up the Taifun GTR clone. Doesn't sit flush with my Dani 25, which bothers me because that was where it was supposed to belong. Sits fine in my Dani SBS, though. Wonder if this is because it's a clone or if the Dani 25 just has minimal adjustability in the 510 pin.
Probably one of the easiest RTAs I've ever set up. The JFC's okay. Definitely not as bombproof as the Kayfun Prime because you're screwing in and out of the platic tank section. Airflow is meh for my taste. A bit too open with the single small hole and a bit to restricted when everything's closed. But it's a simple and effective design with good flavor.
Kayfun X Score Revision:
After vaping the Kayfun X some more and despite my prior assessment (which I am sticking to), I upgrade it to 4/5 because it vapes so darn well. I keep subconsciously going to it despite what I think are flaws. If this continues, I might have to raise it to 4.5/5. It vapes that well.
It's not just the flavor and the Aerokon, which are absolutely top-tier. It's also the tactile feel of vaping on it that's so on-point for some reason. I suspect its (a) part of the Aerokon design, (b) how Kayfun dialed in how the atomizer is pressurized, or (c) a combination of both. It's simply a joy to vape. Even the drip tip, which I was just agnostic about, adds to the experience.
Retention of the Aerokon (I am now a convert, lol), an adjustable JFC, screw-on top cap, and no pull-and-twist logo adjustment would be such perfection. Best of the best. "Kayfun Ultra"? "Kayfun Elite"? In the meantime, I see a Steam Tuners kit purchase in my future to stop the leaky top cap
Taifun GTR Clone First Impressions:
Set up the Taifun GTR clone. Doesn't sit flush with my Dani 25, which bothers me because that was where it was supposed to belong. Sits fine in my Dani SBS, though. Wonder if this is because it's a clone or if the Dani 25 just has minimal adjustability in the 510 pin.
Probably one of the easiest RTAs I've ever set up. The JFC's okay. Definitely not as bombproof as the Kayfun Prime because you're screwing in and out of the platic tank section. Airflow is meh for my taste. A bit too open with the single small hole and a bit to restricted when everything's closed. But it's a simple and effective design with good flavor.
Kayfun X Score Revision:
After vaping the Kayfun X some more and despite my prior assessment (which I am sticking to), I upgrade it to 4/5 because it vapes so darn well. I keep subconsciously going to it despite what I think are flaws. If this continues, I might have to raise it to 4.5/5. It vapes that well.
It's not just the flavor and the Aerokon, which are absolutely top-tier. It's also the tactile feel of vaping on it that's so on-point for some reason. I suspect its (a) part of the Aerokon design, (b) how Kayfun dialed in how the atomizer is pressurized, or (c) a combination of both. It's simply a joy to vape. Even the drip tip, which I was just agnostic about, adds to the experience.
Retention of the Aerokon (I am now a convert, lol), an adjustable JFC, screw-on top cap, and no pull-and-twist logo adjustment would be such perfection. Best of the best. "Kayfun Ultra"? "Kayfun Elite"? In the meantime, I see a Steam Tuners kit purchase in my future to stop the leaky top cap
Good afternoon ladies and gentlemen,
I haven't done much today, a walk with Øsa, will have another trip soon, need to get in shape, i.e. me lol
And then I have to rewick some attys, caspardina, skyline, dotshell, aer, fev, that is, a bit of everything.
I haven't done much today, a walk with Øsa, will have another trip soon, need to get in shape, i.e. me lol
And then I have to rewick some attys, caspardina, skyline, dotshell, aer, fev, that is, a bit of everything.
I was close to buying GTR myself, was a bit skeptical since I'm a 1-1.2mm mtl vaper, and then they were empty in Germany when my interest was at its peak.
What I have bought afterwards, I have got enough attys that are from 37-41mm high.
I still like the look of the GTR, especially with the half tank kit and top cap without all the damn logo.
Similar threads
- Locked
