This one was satin as yours, I got the wrong o-ring and cracked the glass, so I had to disassemble it with pliers and well, it didn't turn out pretty.
I've only gotten to step one.
Later, when the wife gets up and I can start messing with the drill, I should finish the job.
Good morning shiny people. I have a Dovpo Tribute coming for review. I'm excited to get another mod for review. I do have one pod review to finish then I'll be caught up.
Good morning ladies & gentlemans,
I'm not into the old Kayfuns.
There should possibly be something from Kayfun 4 that can be used, but everything was before my time.
You will get the Kumo shiny and fine, it takes time, and you have to take breaks because it gets hot.
Should you have something like this from Eleaf or similar lying around?
If you have, you've made a perfect transition from drill to atty.
Or, a raiser will do the same jobb
Kayfun lite or v3.1, not sure if there was any difference between them.
I'm not into the old Kayfuns.
There should possibly be something from Kayfun 4 that can be used, but everything was before my time.
You will get the Kumo shiny and fine, it takes time, and you have to take breaks because it gets hot.
Should you have something like this from Eleaf or similar lying around?
If you have, you've made a perfect transition from drill to atty.
Or, a raiser will do the same jobb
It looks like a Kayfun Lite Plus with the optional SvM drip tip (2014).
KFL+ as it shipped in 2014.
With the optional drip tip.
With the optional drip tip + full metal jacket.
KFL+ parts.
The Kayfun 4 is a completely different design - its parts will not work with a KFL+. The Kayfun 4 was seriously over-engineered. There has never been another RTA (from any manufacturer) that had so many parts.
The KFL+ shipped with the plastic tank section installed (no glass). The metal tank section was included in the box. Science of Vape made a couple aftermarket glass tank sections for the KFL+ and KFL+v2.
Are you in need of a tank section Tor?
SvoëMesto Kayfun release history:
Kayfun v3 ES 2012
Kayfun 3.1 2013
Kayfun Lite 2013
Kayfun Lite Plus 2014
Kayfun Mini V2.1
Kayfun 4 2014
Kayfun Mini v3 2016
Kayfun 5 2016
Kayfun Prime 2017
and then came all the newer ones..............
Last edited:
The very rich history and full story of SvoëMesto can be found here including photos ( courtesy of @RadiusNick ).
SvoëMesto : свой мѣ́стa : Pronounced "Svoay mesta" : Meaning my (or one's) place (or space)
( courtesy of @qorax [Stan], miss ya buddy!!! )
SvoëMesto : свой мѣ́стa : Pronounced "Svoay mesta" : Meaning my (or one's) place (or space)
( courtesy of @qorax [Stan], miss ya buddy!!! )
Thanks a lot for the information mate.It looks like a Kayfun Lite Plus with the optional SvM drip tip (2014).
View attachment 995645
KFL+ as it shipped in 2014.
View attachment 995647
With the optional drip tip.
View attachment 995646
With the optional drip tip + full metal jacket.
View attachment 995648
KFL+ parts.
The Kayfun 4 is a completely different design - its parts will not work with a KFL+. The Kayfun 4 was seriously over-engineered. There has never been another RTA (from any manufacturer) that had so many parts.
The KFL+ shipped with the plastic tank section installed (no glass). The metal tank section was included in the box. Science of Vape made a couple aftermarket glass tank sections for the KFL+ and KFL+v2.
Are you in need of a tank section Tor?
SvoëMesto Kayfun release history:
Kayfun v3 ES 2012
Kayfun 3.1 2013
Kayfun Lite 2013
Kayfun Lite Plus 2014
Kayfun Mini V2.1
Kayfun 4 2014
Kayfun Mini v3 2016
Kayfun 5 2016
Kayfun Prime 2017
and then came all the newer ones..............
So, if I understand this correctly, it was with lite [plus] that adjustable AF came?
v3.1 as well as lite did not have adjustable af screw, right?
After reading a bit, pretty sure this is a clone.
It doesn't matter, I got it as a gift.
But the sanding went well (DT not done):
It doesn't matter, I got it as a gift.
But the sanding went well (DT not done):
The 3.1 has adjustable airflow via a screw on the side of the build deck. The juice fill port is also on the side of the deck. I don't recall if the 3.1 and 3.1 ES used a standard 510 drip tip. I seem to recall a screw-in drip tip, pretty sure there was an adapter for using a standard 510 DT.
The KFL deck is shorter in height versus the 3.1 making the RTA shorter in height versus the 3.1. No adjustable airflow. The juice fill port was moved to the bottom of the deck. Uses a standard 510 connection for the drip tip.
The KFL+ an adjustable airflow screw was added to the bottom of the deck. Standard 510 connection for the drip tip. Juice fill port still on the bottom of the deck.
KFL+V2 has the same fill port and adjustable airflow as the KFL+. The changes are as follows: An o-ring was added to the fill port screw to prevent juice leaks. The inside of the top cap is recessed allowing for about 1/2 ml more juice capacity. The clear tank section is taller height-wise without making the RTA taller. The drip tip has a slightly larger bore. The juice channels on the deck are slightly deeper versus the KFL+.
Last edited:
Morning shinies 
Vapemail:
You get the spiffy review shot
I've only had this built for a few hours. But holy moly the flavour is brilliant. I love all the air and I'm thinking I'm gonna need some more of these
Vapemail:
You get the spiffy review shot
I've only had this built for a few hours. But holy moly the flavour is brilliant. I love all the air and I'm thinking I'm gonna need some more of these
Considering putting out a wanted ad to see if anyone would be willing to part with their Super-T ELA. I have tons of spare parts for mine, so I won't post it until I'm sure I'll pull the trigger at a fair price.
Also looking to test Tripod 2 and Cabeo clones, perhaps throw a Kayfun X clone to compare to the real thing. Why do I hang out with you guys...?
Also looking to test Tripod 2 and Cabeo clones, perhaps throw a Kayfun X clone to compare to the real thing. Why do I hang out with you guys...?
I don't remember seeing an adapter like that before - wonder if one came in an eleaf product? I can see how screwing in the 510 of the atty and gripping the large knurling with the drill chuck would make the job easier. If I can't find something like that I'll go ahead with your suggestion of rubber and tape to protect the 510 thread.
Yep!
My 20 watt iStick came with one.
It looks like the 30 and 40 watt versions did as well. I skipped those - my next step up was the MVP 3.0 Pro.
(which came with one of those adapters too!)
Similar threads
- Locked
