Svoemesto Kayfun Mini V3

[vapdivrr]

The KM3 is every bit as good a vape as the KFL. I like a tight draw so I haven't tested the airflow only to know it offers more airflow than the KFLs. It's a slightly warmer vape but not a lot. Plenty of TH. If yuo liked the KFLs you will like the KM3. It's an excellent rta. So easy to fill which offsets the smaller capacity.

Sweet

Sent from my SCH-I545 using Tapatalk

 

[qorax]

So bronze, as you know I loved my kfl and if they had 2mm airflow , I would be still vaping them. Besides more airflow and obviously a smaller profile, would you say the vape is similar to the kfl? Can you notice any difference in TH and general heat?

The KM3 is every bit as good a vape as the KFL. I like a tight draw so I haven't tested the airflow only to know it offers more airflow than the KFLs. It's a slightly warmer vape but not a lot. Plenty of TH. If yuo liked the KFLs you will like the KM3. It's an excellent rta. So easy to fill which offsets the smaller capacity.

AGREED!!!

Not Agreed
I have not used my KFLs (currently holding 6) since what - two yrs now. But I'm non-stop using my KM3. This one is BETTER.

 

[Bronze]

Well, I will maintain that from a pure flavor standpoint, my drippers (esp Achilles) still produce better flavor. About one notch better. But they are drippers and have their lack of convenience issues. I tend to go back and forth for longer periods of time. The KM3 has my full attention now and tanks sure offer some nice advantages. Especially when they can approach the flavor of a good dripper.

 

[Bronze]

Double Post

 

[VapinBlues]

When I first got my Mini I grabbed the box and it kinda looked familiar... couldn't figure out what it reminded me of, but it hit me tonight I've been dealing with those boxes for years!

 

[Bronze]

Brings back my childhood of our family television...a Philco Ford.

 

[Fahrenheit]

Anyone using Athena envy with this? Or Xvostick? Wondering how this will look on those.

 

[vapdivrr]

Brings back my childhood of our family television...a Philco Ford.

Same here, I specifically remember when turning it off , the power went off, collapsing the screen to a little dot in the center

Sent from my SCH-I545 using Tapatalk

 

[Bahiaboy]

Anyone using Athena envy with this? Or Xvostick? Wondering how this will look on those.

I have the Xvostick but the Mini is too small ! Does not look right just tried it !

 

[Bronze]

Same here, I specifically remember when turning it off , the power went off, collapsing the screen to a little dot in the center

Sent from my SCH-I545 using Tapatalk

I remember having to lay next to the TV because the vertical hold kept wigging out and you had to keep adjusting it.

 

[Carnage9270]

I remember getting yelled at as a kid because I was sitting on the left side of the couch during a football game and was screwing up the reception.

 

[MikeA5]

Brings back my childhood of our family television...a Philco Ford.

I remember when the horizontal hold or the vertical hold would mess up my father would give the TV a calibrated tap on it's top or it's side to fix the problem.

 

[Bronze]

I remember when the horizontal hold or the vertical hold would mess up my father would give the TV a calibrated tap on it's top or it's side to fix the problem.

That worked too!

 

[Pinggolfer]

Brings back my childhood of our family television...a Philco Ford.

I remember going to the local drug store to buy a tube for our radio and TV. Now if they go bad it's off to Best Buy.

 

[Pinggolfer]

Anyone remember the 3 color knobs on the back of the first color TV's. Each color bar had to be the same thickness and still the color was off.

 

[Pinggolfer]

I guess it's time to order a new flow ring. Does anyone know the diameter of the V3 where the air holes are? I have nothing to measure it with.

 

[Bronze]

I guess it's time to order a new flow ring. Does anyone know the diameter of the V3 where the air holes are? I have nothing to measure it with.

@Air Holes = 19.85mm
Just below = 19.00mm
Beauty Ring on P3 = 22.65mm

I'd go a hair larger on the air ring diameter when you order to be sure it goes around. Maybe +.15 - .25mm

 

[Bronze]

I remember going to the local drug store to buy a tube for our radio and TV. Now if they go bad it's off to Best Buy.

I remember the tester. A big board filled with the various plug sizes.

 

[Pinggolfer]

@Air Holes = 19.85mm
Just below = 19.00mm
Beauty Ring on P3 = 22.65mm

I'd go a hair larger on the air ring diameter when you order to be sure it goes around. Maybe +.15 - .25mm

So should I order 22.65 and 19.9? Right now it's exactly 23x19.

 

[HBcorpse]

So should I order 22.65 and 19.9? Right now it's exactly 23x19.

Honestly, when dealing with fractions of a millimeter, it would just be easier to order the 20 x 22.6...

Because, would you really want to find out that the .05mm DOES make a difference to the KFMv3?
I know the 0.5mm to meet the Provari would be very hard to notice/care about.