The Chameleon Gets An Ego

Status
Not open for further replies.

WitchWay

Ultra Member
ECF Veteran
Dec 30, 2009
1,297
0
Texas
I loved the Ego at first, especially the battery life. Then I got the Chameleon and made the mistake of moving the atty from the Ego over to the Chameleon. The difference was so incredible that I could never use the Ego again, it was just too weak. I even got a couple of Isaac's LR 510 attys to try on it and still didn't like it. I am the minority though, as almost everybody that has one loves it. Ok so I'm weird :)


Happy vaping!!
 

Vaporologist

Vaping Master
ECF Veteran
Verified Member
May 26, 2010
3,192
1,207
Epic Journey
The Ego is a special device to me. The first day I got it is the last day I had an analog and because of that it will always have a special place in my heart. I think it's a must-have device for anyone who prefers using 510 atties since it's so small, light, easy to carry around in your pocket, great battery life, plus it looks really cool with a stainless contoured T-tip.

But like WW, I don't find the Ego to be as satisfactory for my 3.7V needs as I used to since I started using my Chameleon with IMR AW batts and LR atties. Partially it's due to my new found love for LR801 atties at both 2.0 and 1.5 ohms and the level of satisfaction they provide. I also find that AW IMR batts and large Li Ion batts enable LR510 atties to perform on a higher level.

Having said that, I still use my Ego almost every day. I have it on standby and use it when I'm out and about for shorter periods of time. It's reliable and it fits so nicely inside a suit jacket where you pretty much can't even feel it's there.

Edit/Add on: Since the cone plays a huge role in Ego's performance letting warm air go through the atty, I can't wait to see what the cone will do for the Chameleon once that project is completed. That may become the absolute!
 
Last edited:

Switched

ECF Guru
ECF Veteran
Feb 18, 2010
10,144
2,544
Dartmouth, NS Canada
Wow, I am really surprised WWay. I have 'em all big and small and I vape 'em all. I do not have any particular device that sulks in the corner (except reg 510 batts, that I still use) for lack of use. Mind you I will admit that I am a 3.7V junky.

BTW although the eG0 is a 3.1V device technically, it's output is modulated between 3.0 and 3.7V giving an actual constant 3.2V vape.

I just hope we didn't get Isaac's hopes to high. Those who like 'em like 'em allot, and don't who don't dont. What can I say. My opinion of you has not diminished to say the least. It is just something that does not work for you.
 

Iken

Unregistered Supplier
ECF Veteran
Jan 23, 2009
7,011
4,882
PA,USA
LOL Thats exactly what I was afraid of. I don't know if it's from the star alignment but I have ALOT in common with Wway :eek:
I wonder if these mini 801's that I have strapped onto the chameleon will provide a nice fit...;) Doubtful, but they're here! Woo hoo! Wait till you guys try them! I just need to put a few through their paces and check all the others before we release them. So far, its amazing. Flavor of an 801, tuned to 2.0-2.3Ω
delivering an actual feel right in between a 510 and 901, while matching the 510 in vapor production.

Switch, I know you said that that Elixer's is Joye, but does Joye do anything special for Janty?
 

Switched

ECF Guru
ECF Veteran
Feb 18, 2010
10,144
2,544
Dartmouth, NS Canada
LOL Thats exactly what I was afraid of. I don't know if it's from the star alignment but I have ALOT in common with Wway :eek:
I wonder if these mini 801's that I have strapped onto the chameleon will provide a nice fit...;) Doubtful, but they're here! Woo hoo! Wait till you guys try them! I just need to put a few through their paces and check all the others before we release them. So far, its amazing. Flavor of an 801, tuned to 2.0-2.3Ω
delivering an actual feel right in between a 510 and 901, while matching the 510 in vapor production.

Switch, I know you said that that Elixer's is Joye, but does Joye do anything special for Janty?
JoyE is the OEM for all "eGos"(Excalibur, Tornado, the new vortex liquid planet carries). The Riva, the Hello , the F16, the whatever, and that entire ilne are all knock offs.

Edit: Vaping the eGo without the cone renders a different vaping experience, and totally useless IMHO, therefore it's a 510 device. Perhaps you may not be able to make the switch if you are an 801 fan. Last night I vaped the lizard at 7V with Dark Vapure, today the lizard is growing lonely in the corner. I've been vaping my eGos and my 3.7V parallel box (with caramel cheesecake) and typing this tooting my Blackberry menthol mix on my eGo. They all have their place an certain je ne sais quoi :)
 
Last edited:

VaporMadness

Ultra Member
ECF Veteran
Jan 26, 2010
1,521
7
CA, USA
Oh no... i'm thinking of reasons to justify buying an eGo/Riva/Tornado/Maxx like device of some kind. Would have to be one of those that are regulated down a bit in voltage to make sense.

1) LR attys sometimes run too hot on full 3.7v until broken in. I could break them in for a couple of days on the TornegoRivaMaxx, and then put them on the Lizard.

2) I've got 401 attys that i don't use on 3.7v MODs because thats too much power. I also don't use them on the 401 batt because that's too little power. 3.2 really is about right for them.

3) Carto device that won't burn them up as easily. But I'm not such a big carto user.

4) Another backup.

I just thought up that first justification today. Easily the strongest justification of the bunch to my ears.
 

WitchWay

Ultra Member
ECF Veteran
Dec 30, 2009
1,297
0
Texas
LOL Thats exactly what I was afraid of. I don't know if it's from the star alignment but I have ALOT in common with Wway :eek:
I wonder if these mini 801's that I have strapped onto the chameleon will provide a nice fit...;) Doubtful, but they're here! Woo hoo! Wait till you guys try them! I just need to put a few through their paces and check all the others before we release them. So far, its amazing. Flavor of an 801, tuned to 2.0-2.3Ω
delivering an actual feel right in between a 510 and 901, while matching the 510 in vapor production.

Switch, I know you said that that Elixer's is Joye, but does Joye do anything special for Janty?

Isaac, everybody should try an Ego. I have nothing against them, they look great, battery life is fantastic, they're small. And part of my dislike, is I'm not a big 510 atty person. I use them, but not very often anymore. I gave a lot of my 510 stuff to my sister.

That mini 801 might look decent on the Ego, even without the cone. And I do agree with Switched that the cone makes the difference at least on 510s, 901s and cartos. I think the LR mini 801 will be fine without it though. There is someone coming out with an 801 Ego knockoff, I might have to give that one a try with one of the LR 801 attys. Oh and finally someone with 801 cartos!

Ok so bring on those Mini 801s!!! I'm ready to shop :) Alright, when am I not ready to shop :lol:
 

VaporMadness

Ultra Member
ECF Veteran
Jan 26, 2010
1,521
7
CA, USA
Thought of two more reasons...

5) Many people really appreciate them, and not just newbies getting their hands on a long lasting battery for the first time.

6) Heck... Isaac just got one!

Then of course the reasons not to get one:
* I don't really need another ecig battery given 2 MODs and 4 rechargeable 16340s and a handful of underutilized 40x batts already.
* Using as a LR atty breakin device will probably shorten their lifespan considerably, and these are expensive as batteries go.

VM, based on your vaping preferences, I think you would be more than happy with the Ego and that's the one I suggest you to get based on what you are looking for

Seems like Tornado is exactly the same thing as an eGo (both Joye), while the Riva is made by EastMall, and the Maxx by Smoores (maybe). Are there any meaningful differences between the eGo, Riva, and Maxx (aka T-Rex)?

Just did a quick search for differences.

eGo - 650 mah, hard plastic btn, regulated 3.2v
Riva - 750 mah, soft rubber btn, regulated 3.2v
Maxx- 650 mah, steel btn, unregulated 3.7v

There are 900 mah "mega" eGo batts too. And there's something about the T-rex being extinct? The eGo's button looks slightly recessed where the Riva is not.

Its a coin toss between the eGo and the Riva for a potential breakin device, the larger capacity could win the day. If I didn't have full powered mods, I'd be more tempted by the full powered Maxx or Hello devices.

I'll have to go thru breaking in more LR attys to know whether or not its worth getting a device for the primary purpose of breaking them in. They do look very sleek with the cone in place.
 

WitchWay

Ultra Member
ECF Veteran
Dec 30, 2009
1,297
0
Texas
LOL VM you sound just like I do when I'm looking to get something new. For mods I have to justify it to myself. My new policy is it has to be completely different than anything I have had or have now. That pretty much leaves most things out for me LOL except for a juice fed mod. The one kind of mod I have yet to own is a juice fed one.

The Chameleon gets a free pass as I've tried to justify owning two, but haven't been able to do it. So when a new version comes out that will be all it takes and I'll have a second Chameleon :) So Isaac hurry up on the new Chameleon :lol:
 

chev327fox

Unregistered Supplier
ECF Veteran
Apr 17, 2010
361
1
Nowheresville, ME
Actually I don;t know about the carto but the Mega atomizers WILL fit on the Chameleon WITHOUT adapters but you need to out them on very tight or pull the center pin of the atty down just a mm or less.

EDIT:

Oh shoot... sorry Isaac I am not sure I am supposed to message in any other supplier's forum, I hope you don;t mind.. I am sure you don;t and I have a Chameleon and LOVE it by the way with my extension and AW 17670 battery with a LR atty!! Thanks big guy!
 
Last edited:

Iken

Unregistered Supplier
ECF Veteran
Jan 23, 2009
7,011
4,882
PA,USA
Isaac, everybody should try an Ego. I have nothing against them, they look great, battery life is fantastic, they're small. And part of my dislike, is I'm not a big 510 atty person. I use them, but not very often anymore. I gave a lot of my 510 stuff to my sister.

That mini 801 might look decent on the Ego, even without the cone. And I do agree with Switched that the cone makes the difference at least on 510s, 901s and cartos. I think the LR mini 801 will be fine without it though. There is someone coming out with an 801 Ego knockoff, I might have to give that one a try with one of the LR 801 attys. Oh and finally someone with 801 cartos!

Ok so bring on those Mini 801s!!! I'm ready to shop :) Alright, when am I not ready to shop :lol:
Totally agree Wway! I love the small size and they do preform very well with the Joye 510 and our own 510 2.0 series. I was amazed on the performance on 3.4V and the run time is great. I still use it about 40% of the time, but the Highdrain 16340's on the Chameleon spoiled me too!

About the New Chameleon, we got set back a bit. As our machining source fell through. The connection was being built from a friend to another. I tried numerous attempts to go straight to the "more than willing" machinist but the source has been very busy with personal matters and has beating around bush for a direct connection. Project Infinity is still in the works and when it arrives, it's going to blow the roof on the vaping world. However, the new Chameleon was meant to bring us the funds needed for affording the production of Infinity. I been searching for a machinist on and offline, but to no avail just yet. :mad:

Actually I don;t know about the carto but the Mega atomizers WILL fit on the Chameleon WITHOUT adapters but you need to out them on very tight or pull the center pin of the atty down just a mm or less.

EDIT:

Oh shoot... sorry Isaac I am not sure I am supposed to message in any other supplier's forum, I hope you don;t mind.. I am sure you don;t and I have a Chameleon and LOVE it by the way with my extension and AW 17670 battery with a LR atty!! Thanks big guy!
No apologies needed Chevy,
It's quite alright :) When I make personal orders from vendors, I expect to be treated as nothing but a customer.
Thanks for the tip!
 
Status
Not open for further replies.

Users who are viewing this thread