The ProVarinati Saloon, V3
- Thread starter Train2
- Start date
- th_trl_thread_readers 0
- Status
You are not alone by any means. He has picked fights with lots of people far more knowledgable than he is. He repeatedly falls back on fallacy arguments, which he applies incorrectly, to confuse the points other people are making.
"Straw Man" is a noun. There is no such word as "Strawmanning" (one of his favorites).
Last edited:
That's something others have pondered before. It could be that because he disappears periodically, sometimes for a long time, he's not consistently on the radar. It's been speculated a change in medication may be involved.
I'm about to sign off now, but someday I may tell you a few stories. He was mean to some people I like, so I played rough with him a couple of times. I'm not a troll though, I don't bother him when he posts in areas I have no reason to be in, but in other places...
Get your Straw Man on Doc and let's boogie!
Last edited:
Hey all, I just posted a new short story here on the ProVape subforum titled 'The Island of Blemished ProVaris' for anyone interested
.
.
Hey all, I just posted a new short story here on the ProVape subforum titled 'The Island of Blemished ProVaris' for anyone interested
Kewl
Is she from here?
Pretty sure the P3 is going to be launched tomorrow.
Cuz I just bought a REO.
CONGRATS!!!!! Did you pick up the RM2 as well or what topper are you planning on using?
Unfortunately I did... Couldn't help it; in ordered a bunch of stuff I don't need from FT(orings, wire.m tanks.drip tip)and decided for 14,bucks I'll give it a shot. I want my 14 bucks back. [emoji53]
I can now fill my EH Pro via the fill hole. I broke it down, and cleaned it all up. The fill hole was clogged with some gunk, I poked at it with a wire and blew it out with some compressed air. Vaped a whole tank while watching some TV. No gurgling, no leaks, flawless performance. I will give this thing another chance now and hope my drippers don't get jealous on me
Glad I was able to help you figure it out. They can be picky, but not all that difficult once you figure out a few little tricks.
I give mine a good cleaning when I first receive them, before I start using them & roughly once per month I'll do a full strip - the post assembly, all rings, everything - to give it a good cleaning. I also treat the rings with Keg Lube when I put it back together which helps them stay pliable & reduces the chances of nicks that might give them an early retirement. It doesn't take much. I bought a little package of it maybe 10 years ago for a few bucks & have maybe used 1/4 of it (mostly in the brewery on kegs that get stripped every to every other fill). Just using it on vape gear, it'll out live your grandchildren. Unless you already have grandchildren, then it'll probably out live their grandchildren as well.
Aesthetics alone, I knew I wouldn't be happy til I got a Cyclone - so I found and bought that first!
An atty, usually an RDA that is modified to be bottom fed: i.e. Juice can travel from below the atty and up into the deck of the atty, either through the 510 pin (there's a hole bored through the 510 up to the deck) or through the 510 insulators (cuts or slots made through the 510 pin's insulator)
Most bottom feeding mods, like the REO, have an onboard bottle of juice, which is connect at the top via a tube to the 510 connection.
Squeeze the bottle, juice flows up the tube to the 510 connector, up the channel in the 510 pin or insulator, and onto the deck to saturate the wick.
I had the money one time, couldnt figure out what i needed to buy to vape on it lol, i like the size and shape.
The. Thought maybe i should get the billet box.
I dont know now i will probably have to wait till tax returns so i have a few months to learn about the,
The. Thought maybe i should get the billet box.
I dont know now i will probably have to wait till tax returns so i have a few months to learn about the,
Actually, while you can use that, MOST people put an RDA on it, one that's got a hole for juice to go "UP" into it. REO sells a selection of RDA's that have a hold poked through for that. So you squeeze the bottle, and refill your dripper...
Most popular is the RM2 or "Reomizer" but now they have other ones, too - especially if you want to do dual coils, etc....
I got the Vicious Ant Cyclone - one of the few RDA's that comes either "top feed" (normal dripper) or "bottom feed" which works on the REO.
Don't know about atty life!
Adding a pic
See the hole? Juice comes up through there to wet your wick, then excess just runs back down, into your bottle. It's dripping, but without having to actually drip the juice...
Most popular is the RM2 or "Reomizer" but now they have other ones, too - especially if you want to do dual coils, etc....
I got the Vicious Ant Cyclone - one of the few RDA's that comes either "top feed" (normal dripper) or "bottom feed" which works on the REO.
Don't know about atty life!
Adding a pic
See the hole? Juice comes up through there to wet your wick, then excess just runs back down, into your bottle. It's dripping, but without having to actually drip the juice...
Last edited:
It has taken me a few days to get it right but I now have a Sophia in my Billet Box working, and the Billet Box is awesome. It was designed to use 3 OHM 35mm carto's, the Sophia's highest ohm coil is 2.4 OHM, I have my BB turned down to 4 volts with castle long in it right now, and castle long has never tasted so good. There is going to be a batch of red one's up on the site later today, he has a 8 week rule in place, so I can't order one, but if I could I would.
KAS
Actually, while you can use that, MOST people put an RDA on it, one that's got a hole for juice to go "UP" into it. REO sells a selection of RDA's that have a hold poked through for that. So you squeeze the bottle, and refill your dripper...
Most popular is the RM2 or "Reomizer" but now they have other ones, too - especially if you want to do dual coils, etc....
I got the Vicious Ant Cyclone - one of the few RDA's that comes either "top feed" (normal dripper) or "bottom feed" which works on the REO.
Don't know about atty life!
Adding a pic
See the hole? Juice comes up through there to wet your wick, then excess just runs back down, into your bottle. It's dripping, but without having to actually drip the juice...
Ok either my IPad is acting up or the pic isn't showing
I'm going to try my Sophia on the REO but I do want the RM3 to play around with dual coils. Right now, my mini is vaping like a champ on the RM2 between .09-1.0Ω. Next build, I may go a tad lower just to test it out. Switching up with this, ProVari and my Dripper Pros...I'm a happy camper
ETA- ok weird the pic showed up when I quoted you. Nice build! I know a lot of peeps love the cyclone
Another thing about the REO is that some people were put off by the limited number of bottom fed atties.
But! ECF now has it's first registered supplier that will mod just about every rda to be bottom fed. He can be found at the thread Catfish atty mods.
ETA: currently have a bottom fed atomic and Helios. "Preordered" a cyclone too. Alls I gotta do is to order my REO right before I fly back to the states and I'm all set!
But! ECF now has it's first registered supplier that will mod just about every rda to be bottom fed. He can be found at the thread Catfish atty mods.
ETA: currently have a bottom fed atomic and Helios. "Preordered" a cyclone too. Alls I gotta do is to order my REO right before I fly back to the states and I'm all set!
Last edited:
- Status
