Tilemahos new rebuildable part (springomizer)

[darkmix]

The V1 came with an o-ring that went on the rebuildable part, maybe try that and see if it helps.

mrZoSo, that helps!
Thank You!

I got tons of O-Rings. Putting a small one and screwing it slightly into the threads stopped that leakage.
So the flooding was through the treads - not the wick... Another nice effect is, that the Centerpin is in normal position now.

Dark, did you buy the 2mm version? Maybe you can buy the 2,5mm center post if you have trouble with the second method for more airy Tilemahos?

Also, if you have trouble with wicking, you can change housings with V2 housing that has 4mm channels

Imeo, I got both 2mm and 2,5mm, but even 2,5mm works better for me with "more airy option" )

Interesting that although we have done the same thing, yours leaked and mine didn't. What could be the difference I wonder?

Anyway, I hope you figure it out

Maybe it´s just a small difference in the Juice. Maybe mine is thinner.

 

[mrZoSo]

mrZoSo, that helps!
Thank You!

I got tons of O-Rings. Putting a small one and screwing it slightly into the threads stopped that leakage.
So the flooding was through the treads - not the wick... Another nice effect is, that the Centerpin is in normal position now.

Glad it worked!
Just curious, was the center pin sticking out pretty far when it was flooding before?
I ran into that with a newer version of the rebuildable in one of my V1 bases. The fat o-ring on the center post was slipping through the hole in the base. No seal= no preasure= juice flow every where,,lol
Putting the o-ring on the rebuildable allowed it to get snug in the base without allowing the fat o-ring to pop through the base hole, keeping everything sealed properly.

 

[AdamAnd]

Here is a quick vid on the Spring-Omizer not as I good as I hoped. (The Video I mean The spring-omizer was great) Have to read what I type lol Will be more to follow. Thanks Adam



As you can tell a little confused today LOL

 

[mrZoSo]

Nice video Adam!!
I've yet to use the brass tool though,,, lol

 

[AdamAnd]

Nice video Adam!!
I've yet to use the brass tool though,,, lol

Thank You I just wanted to be safe and I was not all there today. I can break just about anything lol. Still vaping away 2nd or third tank still going strong it will be much easier to switch out springs (coils) now I like to change them whenever I get the chance I think getting the wick right for the juice that is being used is the thing. It is so nice having juice flow control. Imeo has thought about just everything to give a great vape.

 

[AdamAnd]

Here is a quick vid on the Spring-Omizer not as I good as I hoped. (The Video I mean the spring-omizer was more than I expected) Will be more to follow. Thanks Adam



As you can tell a little confused today LOL

 

[imeothanasis]

fantastic video as always Adam! Keep up the good work buddy

 

[Dontknow]

Got my order delivered today from ESG. Really quick too.
When I thought I'd ordered the plastic insulator for the positive post, I actually ordered a v2 housing![emoji37].
Guess I'm going to have to make an insulator, 'till I can order a proper plastic insulator when I order my VIR[emoji14].



Sent from my iPad using Tapatalk

 

[imeothanasis]

keep it Dont. Maybe you will like better this housing because of its bigger channels

 

[firehorse66]

My Springomizer's arrived Monday thank's the "legendary customer service" from Vassili - Thank yoouuu!

My first build like Adam at the video, just on my Tilemahos V1 on Hybrid Base of Ersterigon.
It's absolutely amazing how fast and easy you can fit a new setup now with this "piece"
and my experience from first setup on...
...perfect flavor, even no try hit, can maybe become only quiet better with Titanium Springs next time.

 

[Dontknow]

Good thinking Imeo! Edited that post...[emoji106]


Sent from my iPad using Tapatalk

 

[imeothanasis]

My Springomizer's arrived Monday thank's the "legendary customer service" from Vassili - Thank yoouuu!

My first build like Adam at the video, just on my Tilemahos V1 on Hybrid Base of Ersterigon.
It's absolutely amazing how fast and easy you can fit a new setup now with this "piece"
and my experience from first setup on...
...perfect flavor, even no try hit, can maybe become only quiet better with Titanium Springs next time.

fantastic my dear Fire!

 

[imeothanasis]

Good thinking Imeo! Edited that post...[emoji106]


Sent from my iPad using Tapatalk

I only hope you got V2+ housing Dont

 

[Dontknow]

I only hope you got V2+ housing Dont

No. I didn't. I got the v2, which was directly under (or was it above?) the plastic positive post insulator - which I what I meant to order[emoji30].


Sent from my iPad using Tapatalk

 

[imeothanasis]

both plastics (v2 and V2+) are above their housings Dont.

Anyway, if you got V2 housing, its useless. But if you got V2 plus housing, better keep it

 

[AdamAnd]

Just a quick vid installing the Spring-Omizer 2.5mm in the Tilemahos V1 without AFC. Hope I didn't miss anything.

 

[mrZoSo]

I think you only need to swap the center post, no need to swap housings. But I don't have a non-AFC version to verify, could you check?
I've put V2, V2+, and Sprigomizer complete rebuildables in my V1's without any issues.

 

[Ariel_MX]

I think you only need to swap the center post, no need to swap housings. But I don't have a non-AFC version to verify, could you check?
I've put V2, V2+, and Sprigomizer complete rebuildables in my V1's without any issues.

Me too,

by only swapping the center post you take advantage of the wider channels of the springomizer housing

 

[AdamAnd]

Me too,

by only swapping the center post you take advantage of the wider channels of the springomizer housing

Did I make an error in my video I hope not I don't want to send out the wrong info Please let me know and I will correct it ASAP.

 

[breminator]

no error, adam, you explained it very well
i think they only want to know, if the springomizer even works without changing to the v1 housing.

by the way, i like your reviews.