What size is the wire that comes with the youde goblin, does anyone know off hand
Youde Goblin
- Thread starter dravell
- Start date
- th_trl_thread_readers 0
- Status
Needing a good "flavor build" for the Goblin. I rewicked yesterday, and I am getting some very muted flavor. 8 wraps 26g on 2mm at .4 ohms. Almost no flavor. tried Trevor's method, sitting cotton on top of juice wells instead of in them, "orchid style" wicking.. I don't get it. 
This same build, with the same juice flavor, in my Orchid v4 produces fantasic flavor.
This same build, with the same juice flavor, in my Orchid v4 produces fantasic flavor.
I just got done building mine,and getting great flavor maxed out at 50w but for whatever reason I got leaking going on coming out of the afc .
Needing a good "flavor build" for the Goblin. I rewicked yesterday, and I am getting some very muted flavor. 8 wraps 26g on 2mm at .4 ohms. Almost no flavor. tried Trevor's method, sitting cotton on top of juice wells instead of in them, "orchid style" wicking.. I don't get it.
Rebuilt mine today I have a 26g 2mm 7.5w 0.4Ω Ive ran it 30-38 watts and all good Ive settled at 35 watts.
Trevor wicking with KGD, wick just in the channels, Air full open. Getting good flavour.
I fixed my problem and have no more leaks. I can easily crank it up to 50 on my istick and it vapes great. Now I just need to get my order of wire in so I can tinker some more.
Needing a good "flavor build" for the Goblin. I rewicked yesterday, and I am getting some very muted flavor. 8 wraps 26g on 2mm at .4 ohms. Almost no flavor. tried Trevor's method, sitting cotton on top of juice wells instead of in them, "orchid style" wicking.. I don't get it.
i really like my quad coil build in my goblin.
No clue, personally I threw it out just for this reason and also not knowing exactly if it's Kanthal A1, Nichrome etc.
Thanks. I think its 24 gauge. It worked but a little lower resistance then I was going for.
It's Kanthal, put a lighter under it and Nichrome will turn blueish.
Last edited:
Thanks, I'm sure this will come in handy for anyone that is unsure.
----------------------------------------------
Sent from my iPhone using Tapatalk
pic and specs are on page 70 of this thread. the build was kinda half fast. so i probably do a easy to fallow full tutorial within the next day'ish. making a cleaner build and pics.
Looks nice...how touchy is the wicking like this, was it difficult to fit all the wire in the post hole?
actually i found this the easiest to wick. one thing i forgot to mention was when i tuck tops of the wick down i do it with the barrel on.
as far as fitting all the coils into the post holes. it was way easy. having the coil in at a slant makes the coil out of the way for when the leads come through from the other side.
if you want to try this build make sure to position the bottom of the coils at the edge of the juice channel so when you fold the wick tops over they can reach the top of the juice channel.
as far as fitting all the coils into the post holes. it was way easy. having the coil in at a slant makes the coil out of the way for when the leads come through from the other side.
if you want to try this build make sure to position the bottom of the coils at the edge of the juice channel so when you fold the wick tops over they can reach the top of the juice channel.
im loving my apple pie with the quad build. haven't tried any other flavors. i usually vape around 40-45w.
go for it.
So the only issue Im noticing with my Goblin is when I fill the tank (from the bottom), sometimes at the end of the fill the juice comes pouring out of the drip tip, and Im not sure if I'm overfilling, or if it's the pressure of juice entering the tank, with the juice nozzle being firmly in the fill hole, or what... It's happened the last 3 times in a row.. Suggestions?
Thanks,
Thanks,
- Status
