AFS v2

[clyde2801]

Here's his response from the ggts afs specific thread when I asked him the difference between the v2 all mods and the ggts version:
[quote:
1) better looking because its made for GGTS only
2) easier locking and unlocking the CR
3) lighter
4) shorter
5) 30% cheaper
6) No way to leak even if you leave the CR open
7) No gaps between pieces
8) The o-ring that is on the brass connector will be invisible
9) Double sized liquid collector tank]

Looks like I've got a couple or three weeks to start saving my pennies.

 

[imeothanasis]

looks good Imeo, what is the extra tube for on the GG?

PS: cute girl, my son will like her ;-)
PS 2: I meant the CR were it leaks....will try later to stuff the hole with filler
PS 3: what are the differences internally?

the extra tube is the back cap now Emonty and the liquid collector tank at the same time.

If your son is like you then keep him away from the girl

I didnt show you how it is inside yet because the new one is different. You have to see it to understand but its not ready yet

 

[imeothanasis]

Beautiful little girl. Sounds like she's at the age where the sing-song thing is going on. That's a good age.

Oh, the mod was nice, too.


C'mon June 10th-15th.

she is 4 years old clyde

The new AFS looks simpler, less parts, and its like one unit with GGTS without gaps. You can unscrew it much easier, CR moves less and the collector tank is huge

 

[harpo]

she is 4 years old clyde

The new AFS looks simpler, less parts, and its like one unit with GGTS without gaps. You can unscrew it much easier, CR moves less and the collector tank is huge

Do we use our top cap on our GGTS or will this AFS come with a new top cap?

 

[imeothanasis]

Harpo, the cost will be at 60 euros so yes, its at 75 dollars but with a new cap too!! So you can be able to smoke GG as it is, or change caps to smoke it with AFS. Of course you can smoke it without AFS but with only the new cap. And you can have a new more cap that will give the ability to smoke it without AFS but with the CR

In a few words, it can do anything

 

[Stormynights]

the extra tube is the back cap now Emonty and the liquid collector tank at the same time.

If your son is like you then keep him away from the girl

I didnt show you how it is inside yet because the new one is different. You have to see it to understand but its not ready yet

 

[imeothanasis]

Here's his response from the ggts afs specific thread when I asked him the difference between the v2 all mods and the ggts version:
[quote:
1) better looking because its made for GGTS only
2) easier locking and unlocking the CR
3) lighter
4) shorter
5) 30% cheaper
6) No way to leak even if you leave the CR open
7) No gaps between pieces
8) The o-ring that is on the brass connector will be invisible
9) Double sized liquid collector tank]

Looks like I've got a couple or three weeks to start saving my pennies.

erase 4) because the new one is 4mm longer because of the 9). The liquid collector tank is not doubled but 6 times bigger!

 

[imeothanasis]

Do we use our top cap on our GGTS or will this AFS come with a new top cap?

AFS can be used with the new cap. But you can use the new cap without AFS too. You can also use the new cap with CR by having a new small cap that new users will have it if they dont buy AFS.

 

[emonty]

Imeo,

did you look into the possibility to screw/unscrew the attie/carto without taking out the liquid everytime?

 

[imeothanasis]

Imeo,

did you look into the possibility to screw/unscrew the attie/carto without taking out the liquid everytime?

If AFS was shorter then you could do it on the current AFS too by just unscrewing the atomizer. But you cant do it easy because your fingers cant go inside the AFS tank easy. The solution to this is a shorter AFS but it would take less liquid inside Emonty

 

[imeothanasis]

If AFS was shorter then you could do it on the current AFS too by just unscrewing the atomizer. But you cant do it easy because your fingers cant go inside the AFS tank easy. The solution to this is a shorter AFS but it would take less liquid inside Emonty

But why we need to change atomizer while keeping liquid inside? We will mess our hands

 

[emonty]

If AFS was shorter then you could do it on the current AFS too by just unscrewing the atomizer. But you cant do it easy because your fingers cant go inside the AFS tank easy. The solution to this is a shorter AFS but it would take less liquid inside Emonty

mmm, with small pliers it might be possible. The fact to change easier atties makes the AFS even better, especially when on the go, it is a pain to change atties because you have to take out the liquid and it is messy

 

[imeothanasis]

mmm, with small pliers it might be possible. The fact to change easier atties makes the AFS even better, especially when on the go, it is a pain to change atties because you have to take out the liquid and it is messy

no pliers. New brass small thing has smaller o-rings and rombuses so chanching atty is very easy now. But we change atty every 1 week or every 1 month, its not something we need I think. Am I right?

 

[emonty]

no pliers. New brass small thing has smaller o-rings and rombuses so chanching atty is very easy now. But we change atty every 1 week or every 1 month, its not something we need I think. Am I right?

yes, when it works 100% I agree, but like now that I experience carto's which don't work and atties that blow very fast it would be nice. Also to change from carto to 6V, 7.xV or LR atties on the go by quickly changing would be not bad IMHO.

 

[emonty]

I have put extra filler in the cartomizer. I did it by cutting a small long piece and inserted it between the outertube and the filler, pushed it down and it works!!!

Imeo,

how did you add the extra filler?

 

[imeothanasis]

yes, when it works 100% I agree, but like now that I experience carto's which don't work and atties that blow very fast it would be nice. Also to change from carto to 6V, 7.xV or LR atties on the go by quickly changing would be not bad IMHO.

I change atties only if they get burned emonty, so I never thought of that.

 

[vapn]

Emonty, I use a pipette when I want to change atties. I just pull the juice from the tank and leave it in the pipette until I get it all back together and pump it back in the AFS. I don't really see how this could be done without removing the liquid from around the atty. It would have to be isolated some how to be able to take the atty out without draining the juice. Know what Im saying...??

Imeo, This is the one I am waiting on. I can't wait for the TS AFS...!!!!! So you are saying that the new TS line will be ready for this AFS by taking a piece off the top cap and replacing it with the AFS? Now for those of us with the TS already, this new cap, will it work without the AFS also? You have me a little confused with your post about this..

 

[emonty]

Emonty, I use a pipette when I want to change atties. I just pull the juice from the tank and leave it in the pipette until I get it all back together and pump it back in the AFS. I don't really see how this could be done without removing the liquid from around the atty. It would have to be isolated some how to be able to take the atty out without draining the juice. Know what Im saying...??
.

yes, I know Vapn and you are right, changing the attie only can be done by Taking out the juice first. The new AFS will be easier though according to Imeo

 

[vapn]

Did you figure out what the problem was with the cartomizers? I know what you mean about not wanting to mess with your AFS when its working. If it aint broke don't fix it huh?

 

[emonty]

Did you figure out what the problem was with the cartomizers? I know what you mean about not wanting to mess with your AFS when its working. If it aint broke don't fix it huh?

I added extra filler in the cartomizer and also don't top it al the way off with liquid, pressure is less that way. When we get the TS AFS it will be better as the tank will be bigger, so still a lot of juice and not filling it all the way....