Are you done stocking up?

[DavidOck]

I added a few Coppervape Skylines to my KFs. Adds juice flow control and greatly expands air flow options. Oh, and top fill.

 

[JCinFLA]

Some juice doesn't work well in the KFL tanks but are good in the STM or a Lemo. The STM and Lemo are more airy and I use them at slightly higher power and lower ohms.

In case you want more Lemo RTAs, especially if they're at a dirt cheap price....

Eleaf Lemo RTA - Only the Black are still available. Someone I've been helping to build a stash for herself and her Mom...wiped them out of literally dozens of the SS ones.

 

[englishmick]

In case you want more Lemo RTAs, especially if they're at a dirt cheap price....

Eleaf Lemo RTA - Only the Black are still available. Someone I've been helping to build a stash for herself and her Mom...wiped them out of literally dozens of the SS ones.

thanks for the tip.

Didn't really need them, but hey. Actually started with Lemos but decided I liked the Drops better so I ended up with a few Lemos and a bunch of Drops. Now I'm a bit fed up with having to refill the Drops so often. I ordered half a dozen. The shipping was as much as the tanks, but still dirt cheap.

I remember my first Lemo, cost almost $50. Gave my wife the link for our Christmas present swap. It was the big thing on ECF back then, my first RTA after Pro Tanks. I'm still using that same tank almost 6 years later. I learned about coiling and wicking on it.

I actually found flat o-rings that would fit the Lemo after years of searching. They had all the sizes in stock from ID 10 through 17, then it skipped to ID 20. The Lemo needs ID 18. I need to go check them out again.

 

[JCinFLA]

It was the big thing on ECF back then, my first RTA after Pro Tanks. I'm still using that same tank almost 6 years later. I learned about coiling and wicking on it.

The LEMO was the first RTA, too, for the person I mentioned above. Since I knew they came with a coil and wicking already installed...I sent her 1, to vape on it and see if she'd even like it. She didn't like it...she absolutely LOVED it! She said she knew she didn't even need to try any others. Before I could even talk her through how to install a pre-wound coil and wick it...she'd ordered 20 more! A couple days after getting those, since she'd gotten the hang of recoiling & rewicking easily...she ordered a ___ton more! She's only in her early 40's, doesn't plan to ever stop vaping, and was buying for herself and her Mom. Both of them like to have 3-4 set-ups going at once. So, for less than $160 (cost of all the Lemos, a generous supply of rayon, 100's of pre-wound coils, and spools of wire) she's set for rebuildables for both of them!

 

[JCinFLA]

I actually found flat o-rings that would fit the Lemo after years of searching. They had all the sizes in stock from ID 10 through 17, then it skipped to ID 20. The Lemo needs ID 18. I need to go check them out again.

Would you mind letting me know where you found the ID 18 ones, when you find out? I'll pass that info along to her.

 

[UncLeJunkLe]

I actually found flat o-rings that would fit the Lemo after years of searching. They had all the sizes in stock from ID 10 through 17, then it skipped to ID 20. The Lemo needs ID 18. I need to go check them out again.

Would love to know your source for flat orings. Been looking for these for a long time. Various sizes.

 

[JCinFLA]

Got an email from EjuiceSteals about 1/2 hour ago. Today only...20% off of any order. Code: 20%off
They still have some decent things on their site.

ETA: If anyone uses the Renova Zero pod set-up...the starter kits will be $5.59 after the discount, in their Clearance section. Also, they have the Eleaf HW2 0.3ohm 5-packs of coils (that work in the Cerberus, SMOK Baby Beast, etc.) for $4.79 after the discount. Those are just a few from Clearance. Other "goodies" are throughout the site.

Aegis Max 100W Kit with Zeus Tank is $45.59 after the 20% off.

 

[Mowgli]

I never ordered from Everzon before. Good experience with shipping?

Paypal so they included no description in the receipt.
Only contact info, quantity and price. Sneaks.

BTW - Zeus X RTA in SS is $21 - $23 for colors
Shipping was $9 for 2 but I'll take 2 X RTAs for $55 total FTW these days in Mass no less

 

[fiddleshe]

thanks for the tip.

Didn't really need them, but hey. Actually started with Lemos but decided I liked the Drops better so I ended up with a few Lemos and a bunch of Drops. Now I'm a bit fed up with having to refill the Drops so often. I ordered half a dozen. The shipping was as much as the tanks, but still dirt cheap.

I remember my first Lemo, cost almost $50. Gave my wife the link for our Christmas present swap. It was the big thing on ECF back then, my first RTA after Pro Tanks. I'm still using that same tank almost 6 years later. I learned about coiling and wicking on it.

I actually found flat o-rings that would fit the Lemo after years of searching. They had all the sizes in stock from ID 10 through 17, then it skipped to ID 20. The Lemo needs ID 18. I need to go check them out again.

Link for the square orings? Fyi they are square orings not flat orings. That may help in your googling.

 

[Aliraonz]

I never ordered from Everzon before. Good experience with shipping?

Paypal so they included no description in the receipt.
Only contact info, quantity and price. Sneaks.

BTW - Zeus X RTA in SS is $21 - $23 for colors
Shipping was $9 for 2 but I'll take 2 X RTAs for $55 total FTW these days in Mass no less

I am not is the US but I have ordered from Everzon before without a problem. I am sure someone else will give their experience too.

 

[markfm]

I never ordered from Everzon before. Good experience with shipping?

Paypal so they included no description in the receipt.
Only contact info, quantity and price. Sneaks.

BTW - Zeus X RTA in SS is $21 - $23 for colors
Shipping was $9 for 2 but I'll take 2 X RTAs for $55 total FTW these days in Mass no less

I bought a cheapie armour pro from them early this year, no issues.

 

[englishmick]

Would you mind letting me know where you found the ID 18 ones, when you find out? I'll pass that info along to her.

If I saved a link I'll check it out later. If not it may take me a while. I'm on it though.

 

[hittman]

I've placed several orders with Everzon. Never had a problem. It does take usually a couple weeks to receive orders.

 

[Qew]

Ugh, here we go again, heads up Michigan!

Write your subject line here. Keep it under 50 characters and add a personal touch!

 

[Myrany]

Sitting here Vaping my ancient REO and finishing up my first Bobbin lace project.
https://www.e-cigarette-forum.com/a...5/?temp_hash=f4657d35f0ba40790c582ee5d403add8

 

[Territoo]

Sitting here Vaping my ancient REO and finishing up my first Bobbin lace project.
https://www.e-cigarette-forum.com/a...5/?temp_hash=f4657d35f0ba40790c582ee5d403add8

Very pretty.

 

[CaveFurby]

Little Miss Gretchen is feeling left out...she didn't get the VP nomination for all her hard work in Michigan. So she has a new project to keep herself in the spotlight.

 

[misswish1]

Sitting here Vaping my ancient REO and finishing up my first Bobbin lace project.
https://www.e-cigarette-forum.com/a...5/?temp_hash=f4657d35f0ba40790c582ee5d403add8

That's your first one? Wow, you did an amazing job!

 

[Myrany]

That's your first one? Wow, you did an amazing job!

Aww ty guys. There was much cussing and taking out/redoing involved in it. LOL

I have always been neat handed when it comes to textile work.

 

[Koolkiz]

Sitting here Vaping my ancient REO and finishing up my first Bobbin lace project.
https://www.e-cigarette-forum.com/a...5/?temp_hash=f4657d35f0ba40790c582ee5d403add8

Love it! Is it tedious to do lace? My son makes looms to create projects using yarn. I have no clue how he does it!