Makrolon polycarbonate looks frosted when not filled but becomes crystal clear when wet,awesome stuff
- Status
You lucky sob Martin
beautiful mods you have there bud. I have a bliss on the way to me and I'm finally on the list for an NGP ring genny. ATM I'm rocking an ody v2, DiD and ratank, have a vivi tank coming and in the coop for a Phoenix tbc-2 dripping atty too..... Rebuildable heaven lol. I seriously gotta start saving for one of the sveo units though, hows it stack up power wise next to the vmax?
beautiful mods you have there bud. I have a bliss on the way to me and I'm finally on the list for an NGP ring genny. ATM I'm rocking an ody v2, DiD and ratank, have a vivi tank coming and in the coop for a Phoenix tbc-2 dripping atty too..... Rebuildable heaven lol. I seriously gotta start saving for one of the sveo units though, hows it stack up power wise next to the vmax?
Family picture time!
Too cool...
I wonder if someone can make some of those stickers for the back window of minivans but instead of stick figures of the family, have PV's
You lucky sob Martin
Power-wise...semovar is adjustable from 3V to 6V and up to 15W independently
If you try to up the thing too much,it will throw an E3 error code telling you that you are exceeding the atomizer value properties,amazing stuff...
Puff counter,resistance reading,battery gauge,display brightness adjustable,on/off,firmware version,you can even ask it to alert you if you go over a preset amount of vape time
Vape time counter (amazingly enough,I found that I vape about 20 minutes in a 8 hrs span,compare that to analogs!)
I can also use 18350/18500.18650 and all in between;
Button is small and flush though and the whole thing is heavy standing at 393 grams (sticker form) and 215 grams (std form) compared to a Vmax at about 154 grams with the mini Kayfun on it
But who would dare comparing a $600 APV to a $100 APV
Last edited:
...
But who would dare comparing a $600 APV to a $100 APV
So... in the family photo above, the VMax is the family butler?
BTW, almost 400g for one PV?
Well, I guess you can save some money by not getting a health club membership. Bench press a couple of Semovars and you're good.
Last edited:
Not trying to compare the devices but the power of them I know that device is of much higher quality just wondered if the amperage was there and it appears to have more than enough to get the job done. Very nice
I know that device is of much higher quality just wondered if the amperage was there and it appears to have more than enough to get the job done. Very nice
crap MR.Mike I hope you get into all this ...so you can break it down for me lol...as always I will follow your lead lol
only thing that bothers me...like everything eles vape related as I get V1...there is work being done on V123.23-8-FU! modlel and I don't know when is a good time to jump in lol
The Vmax the bastid member of it since he has the kayfun mini on top of itself
I am currently vaping the svoemestos at 3.7 volts/9w with a 2.6 ohms coil
I am currently vaping the svoemestos at 3.7 volts/9w with a 2.6 ohms coil
The only thing coming as far as changes goes for the svoemestos is they will go from hard chromed brass to full stainless sometimes in the near futur
Thanks martinc,
I am still new to the game at just over 2 months and well I have to pick my battles ..I hit the DIY full force and no longer buy premaid juice..i would if I was standing in front of it and did not have to pay shipping and handeling fees and it was a fair price!
I would like to be able to use a broad spectrum of tanks but it seams we don't get along well I seam to flood the cartos on them rather quick?? Idont know but so far the only thing thats worked well in the resemblance of a tank is the 3.5ml and the 2.0ml ViVi Novas
....yup I am a tard!....but i still want to try everything i can get my hands on to find the best for me!
I am still new to the game at just over 2 months and well I have to pick my battles ..I hit the DIY full force and no longer buy premaid juice..i would if I was standing in front of it and did not have to pay shipping and handeling fees and it was a fair price!
I would like to be able to use a broad spectrum of tanks but it seams we don't get along well
I seam to flood the cartos on them rather quick?? Idont know but so far the only thing thats worked well in the resemblance of a tank is the 3.5ml and the 2.0ml ViVi Novas....yup I am a tard!....but i still want to try everything i can get my hands on to find the best for me!
Well,rebuildables might just be the thing for you,but not the Genesis style (yet!).
I tell ya,making a new coil for one that works with wick is child`s play really...you are a hunter/fisherman,you do your own fishing flies/lures for trout?
Same thing (well,almost) just wind a lil wire around a cord and fix it to the post and voila!
I am here to help and so are all the posters in this thread if/when you want to make the jump!
I tell ya,making a new coil for one that works with wick is child`s play really...you are a hunter/fisherman,you do your own fishing flies/lures for trout?
Same thing
(well,almost) just wind a lil wire around a cord and fix it to the post and voila!I am here to help and so are all the posters in this thread if/when you want to make the jump!
well I'll admit I only read the first 5 or 6 pages of this thread, but I'm hoping you guys can help. Using a lavatube and typically a dripper, looking to get into tanks/rebuildables. As we all know the ECF is so huge that it becomes difficult to find specific information sometimes - I'm just looking for advice on where to start! What's the most user-friendly and widely available rebuildable atty/tank I can get? Thanks in advance!
Smok has come ut with their 1st attempt at a rebuildable tank WONDERFUL WONDER!!! SMOKTECH VIVI Tank - Detailed info for WONDERFUL WONDER!!! SMOKTECH VIVI Tank,tank,WONDERFUL WONDER!!! SMOKTECH VIVI Tank,510 VIVI-DCT on Alibaba.com
which is basically kind of a 1 piece scubagen;we have yet to know how much it will cost but it should be available Canada-wide next week or the next tops I think (coming to Canvape)so you should try that one 1st,should be around $20 or less,not sure (at all); that is a wick and wire rebuildable,easy to setup.
Then you got your DiD (genesis,using stainless mesh with coil) which seems to be easy to setup too now that I have discovered the rolling paper method!
which is basically kind of a 1 piece scubagen;we have yet to know how much it will cost but it should be available Canada-wide next week or the next tops I think (coming to Canvape)so you should try that one 1st,should be around $20 or less,not sure (at all); that is a wick and wire rebuildable,easy to setup.
Then you got your DiD (genesis,using stainless mesh with coil) which seems to be easy to setup too now that I have discovered the rolling paper method!
Man, as hard as I try I just can't get into my RATank like I want to. The wick material I have sucks. It takes forever to wick no matter how loosely I wind the coil. And the flavour isn't very good. I want to try it with a mesh wick setup but I don't have a torch lighter or ss mesh, and I don't really know if I want to drop the money on those to not like it. At a loss here. Ugh.
dollarama dear. They were my best friend when I was a smoker as they had cheap butane torch lighters.
Sorry that's the only help I can offer
Got to try to lay your hands on braided wick,only problem is its rather big (3mm I think) that stuff wicks lightning fast
Where might one get such wick? That could work well in other rebuildables.
Svoemesto uses the stuff
Кремнеземный шнур 1 мм (1 метр) ― SvoёMesto
I`m pretty sure you can find it somewhere else though
- Status
Similar threads
- Locked
