How To Care for your SB!
- Thread starter cddz
- Start date
- th_trl_thread_readers 0
-
- Tags
- altsmoke totally wicked
- Status
Hey Koman, but the buttons are rated at 1,000,000 Mechanical Clicks ;P A bit higher than your average ecig 
Hey Koman, but the buttons are rated at 1,000,000 Mechanical Clicks ;P A bit higher than your average ecig
Rob isn't kidding around either, I own several e-cigs and commercially available mods, and the SB is the ONLY one that has NEVER given me a single solitary button problem or failure, EVER; not once(knock on wood). Even the infamous GG(with it's "eternal" purely mechanical switch) has , from time to time, given me issues(albeit not often).
I have to honestly say that I have never had one single problem with the Silver Bullet.
I cannot say that about any other e-cig/mod I've purchased.
Well...if you only knew the Button Ritual I do before sending each unit out takes 20 minutes, but it's suppose to increase button live by 300%. Only time will tell ;P LOL
I have a BIG problem with mine!
I can't seem to put it down unless its to pick up my BB!
I have a BIG problem with mine!
I can't seem to put it down unless its to pick up my BB!
Hehe, nice avatar btw
My god...is that you?
That's not the av he was talking about.
This is:
no mention of the button, how do you keep it working? mine is starting to squeak!
Yep! i'ma thunk'n i'd buy a nudder SB have it in 2 or 3 days. the send udder one back fer switch repair,din you gots erself a backup!!! den again i ain'ts seen nuff'n yet dat duct tape wood'nt fix!!!
I assume it is the switch. It is only 1 or 2 months old. I can not get in touch with anyone about this.
can i get the nolax from homedepot they are also brain dead there i went in there and no one new what the heck i was talking about so i left but now i know its in the electrical il ill go back if they have it
do they???
because lawes is a longer drive away but i dont want to go to homedepot for nothing again
do they???
because lawes is a longer drive away but i dont want to go to homedepot for nothing again
I got some at Home Depot...Its in the electrical isle, down on a bottom shelf or near the bottom.... Hope you find it !
I have a question for Chad....
What are we suppost to clean the atty threads with on the SB ?? ANd...do you put Noalox on the atty threads at any time ?
Thanks
hew thanks Buddy i got my silver bullet in yesterday and when i took it out i had to wipe my mouth off because i almost drooled on it.
Also when i went to screw in a atty on the silver bullet it would not screw
in i was so confused i tried 12 different 510 attys. and none screwed in but i was able to get about 1 full turn then it just stops so i unscrewed it to see what was up and could not see anything wrong so then i took a q tip and started cleaning the thread and some black residue came off on the q tip,after that i tried screwing it in again and i was able to get 1 1/2 turns and that it so i unscrewed it again cleaned the treads off again more black residue come off on the q-tip ("Note all atty. that i used where Brand new")
After cleaning it that final time i took some lubricant called Super Lube and put some on the tip of the Q-tip and applied some on and worked it in really good and then went too screw the Atty in and Poof LIKE "BUTTA" I think what happened was "this is just a guess" probably got a little dirty during production in the threads.. But everything else was clean and shine as it could be.
The "Super Lube" came with my air brush kit that i use on the trigger and the pin inside so it doesn't look up. The Super Lube is thick liquid the best way i can explain how thick it is its as thick as VG e liquid
Here's a link of the stuff:
http://www.dickblick.com/products/iwata-super-lube/?wmcp=google&wmcid=products&wmckw=26974-1005-9897
so you can see what i used to solve this problem.
Also @WhatAClumsyGirl i think you can use a little alcohol on a q-tip and just rotate to q-tip round and round intill its clean i wouldn't put Nolax on the Atty threads or the atty connector threads i think its to thick but lets see what chad says!!!!
Last edited:
- Status
